Guido Broich writes:
> Hi,
>
> I run FEDORA14 and got now an EPSON SX525WD and it is connected both via
> net at 192.127.0.012 and USB. It works fine on both lines for printing,
> but is not recognized by sane.
>
> yum install
> epson-inkjet-printer-stylus-tx550w-series-1.0.0-1lsb3.2.i486.rpm
> i
Hi,
I run FEDORA14 and got now an EPSON SX525WD and it is connected both via
net at 192.127.0.012 and USB. It works fine on both lines for printing,
but is not recognized by sane.
yum install
epson-inkjet-printer-stylus-tx550w-series-1.0.0-1lsb3.2.i486.rpm
is done.
I corrected epson2.conf as fo
Hi,
I've got a device with the same USB PID (0x85E), the Stylus Office
BX525WD, working over USB with SANE with no trouble so far. From looking
at specs on epson.co.uk, this looks like it's probably identical
hardware, just differently marketed and with different software bundled.
I'm using Ubunt
Can you get a log of the scanner in action, perhaps someone will
recognize the error.
SANE_DEBUG_EPSON2=255 scanimage >test.pnm 2>test.log
allan
On Wed, Dec 29, 2010 at 5:03 AM, Andr? Roth wrote:
>
> Hello,
>
> I tried to get the Epson Stylus SX525WD (0x4b8 0x85e) to work, without
> any success
Hello,
I tried to get the Epson Stylus SX525WD (0x4b8 0x85e) to work, without
any success so far. I added the USB numbers to /etc/sane.d/epson2.conf,
and was able to launch a scan once using scanimage. After this, I only
got segfaults, and none of the graphical scan programs wanted to
recognize th
Hello,
I tried to get the Epson Stylus SX525WD (0x4b8 0x85e) to work, without
any success so far. I added the USB numbers to /etc/sane.d/epson2.conf,
and was able to launch a scan once using scanimage. After this, I only
got segfaults, and none of the graphical scan programs wanted to
recognize t
