Hmm, can confirm, it scans some portion of the image and then hangs. I
think the official software on Windows doesn't support full-page scans
at 2400dpi or greater. It does work if you limit the scan to an area.
Not sure what should be done about this, I don't think there's a
standard way to expos
Hey folks,
I just bought a CanoScan LiDE 220. Unfortunately scanning with 2400 or 4800
dpi doesn't work as claimed on your website. scanimage just hangs, not
printing any errors and the sensor doesn't move an inch.
Scanning with 1200 dpi works fine though.
$ scanimage -V
scanimage (sane-backends)
Dear everybody! :)
sane-find-scanner gives its chip as GL 847+, GL848+ though the list
says it's a
GL124+.
There is no source file gl848.c as there are for GL124, GL647 etc.
Shall I try it on with an older program (.23, .24, .25!!?)?
csola48
--
sane-devel mailing list: sane-devel@lists.a
Dear everybody! :)
sane-find-scanner gives its chip as GL848+ though the list says it's a
GL124+.
There is no source file gl848.c as there are for GL124, GL647 etc.
Shall I try it on with an older program (.23, .24, .25!!?)?
csola48
--
sane-devel mailing list: sane-devel@lists.alioth.deb
Expected version like that, where not necessary (non-functioning)
various magic of Canoscan Lide 220 usages?
csola48
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe
LiDE 220 is listed as "complete" in
SANE docs.
What doesn't work?
Maybe the chips they differ? old: gl124 < >
now: gl847 ?
csola48
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/c
LiDE 220 is listed as "complete" in SANE
docs.
What doesn't work?
Maybe the chips they differ? old: gl124 < > now: gl847
?
csola48
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailma
LiDE 220 is listed as "complete" in SANE
docs.
What doesn't work?
Maybe the chips they differ? old: gl124 < > now: gl847
?
csola48
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailma
Hi,
Is a hope that way, that the Lide220 scanner will work well ?
Pls, help or ask a question...
csola48
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_pas
2016-09-20 14:50 keltezéssel, m. allan noah írta:
> What version of sane-backends are you running?
>
> allan
>
Hello!
Rolf Bensch PPA repo: sane-backends 1.0.26-git20160712-xenial0 (
http://bit.ly/2cI8Bna )
csola48
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.a
Debug info
$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate
Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 04a9:1073 Canon, Inc. I550 Printer
Bus 001 Device 004: ID 093a:2510
CanoScan Lide 220 not works...
Debug info:
https://www.dropbox.com/sh/023mmkd8iimfilb/AAAFrICeTS6CReOZ61_gqTrma?dl=0
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe
What version of sane-backends are you running?
allan
On Tue, Sep 20, 2016 at 8:46 AM, csola48 wrote:
>
>
> --
> sane-devel mailing list: sane-devel@lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-requ...@lists.alioth.debian.org
On Mon, Apr 6, 2015, at 07:06 AM, Michael Shigorin wrote:
> On Mon, Apr 06, 2015 at 02:15:27PM +0200, Stef wrote:
> > >I tried turning on debug to find out what is happening and found that
> > >everything works perfectly if I enable massive debugging:
> > Since the usual way to find out bug is to
On Mon, Apr 06, 2015 at 02:15:27PM +0200, Stef wrote:
> >I tried turning on debug to find out what is happening and found that
> >everything works perfectly if I enable massive debugging:
> Since the usual way to find out bug is to enable debug traces,
> it is going to be difficult to solve your pr
On 04/04/2015 18:44, m...@fastmail.com wrote:
Greetings:
Using current code from github, I am trying out a new scanner. It works
without arguments, but only in the lowest quality. If I add arguments
(it doesn't seem to matter which ones) I get this error (the same every
time):
$ local/bin/scani
Greetings:
Using current code from github, I am trying out a new scanner. It works
without arguments, but only in the lowest quality. If I add arguments
(it doesn't seem to matter which ones) I get this error (the same every
time):
$ local/bin/scanimage --device 'genesys:libusb:003:039' --mode l
Greetings:
Using current code from github, I am trying out a new scanner. It works
without arguments, but only in the lowest quality. If I add arguments
(it doesn't seem to matter which ones) I get this error (the same every
time):
$ local/bin/scanimage --device 'genesys:libusb:003:039' --mode l
On 09/03/2015 13:20, Pierre-Alain Tercier wrote:
Dears,
(sane-backends git version from yesterday)
I'm able to scan (and preview) at 300dpi a full page
But not at 600dpi and not if I restrict the area to a smaller part!
I will try to follow the situation.
At the mmoment on my debian-jessie I h
On 09/03/15 12:20, Pierre-Alain Tercier wrote:
Dears,
(sane-backends git version from yesterday)
I'm able to scan (and preview) at 300dpi a full page
But not at 600dpi and not if I restrict the area to a smaller part!
I will try to follow the situation.
At the mmoment on my debian-jessie I had
Dears,
(sane-backends git version from yesterday)
I'm able to scan (and preview) at 300dpi a full page
But not at 600dpi and not if I restrict the area to a smaller part!
I will try to follow the situation.
At the mmoment on my debian-jessie I had to manually moves all the
libsane stuff from
Hi SANE Developer,
Is there a schedule to implement support of CanoScan Lide 220 ?
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to san
23 matches
Mail list logo
