Like to try, I do have the Windows driver but regret don't have the
skills. I'll keep a note of this "just in case". Probably unsubscribe
soon, SANE is an excellent project but I can't do anything with the
advice I've been given, let alone contribute anything. So I'll sign off
by thanking you and T
well, i am sorry we can't do more, but before you go, how would you
rate the support of the scanner, other than the calibration issues?
does it scan in the same modes and resolutions as the windows driver?
i would like to update our scanner lists...
allan
On 1/14/08, Philip Aston wrote:
> Like t
On 1/14/08, Philip Aston wrote:
> All are prints of as near to pure red blue green as I could find using
> drawing tools on MSword, printer is a Tallygericom colour laser, I see the
> fabric effect as horizontal/ vertical "tartan". To hopefully exclude this I
> uploaded "blue2.pnm" which is a slig
than mid blue from a
flysheet of a book. Regards-Philip
-Original Message-
From: m. allan noah [mailto:kitno...@gmail.com]
Sent: 13 January 2008 21:10
To: kilgota at banach.math.auburn.edu
Cc: Philip Aston; sane-devel at lists.alioth.debian.org
Subject: Re: [sane-devel] artec e+pro- vertical lines-
On 1/13/08, kilgota at banach.math.auburn.edu
wrote:
>
>
> On Sun, 13 Jan 2008, m. allan noah wrote:
>
> > On 1/12/08, kilgota at banach.math.auburn.edu wrote:
> >> What I see in these images is, something like what I suspected could be a
> >> possibility, or it could be something else.
> >
> > we
On Sun, 13 Jan 2008, m. allan noah wrote:
> On 1/12/08, kilgota at banach.math.auburn.edu wrote:
>> What I see in these images is, something like what I suspected could be a
>> possibility, or it could be something else.
>
> well, that about covers all the possibilites :)
>
Yep. We should never
On 1/12/08, kilgota at banach.math.auburn.edu wrote:
> What I see in these images is, something like what I suspected could be a
> possibility, or it could be something else.
well, that about covers all the possibilites :)
> It is difficult to tell
> without the actual raw data. I assume (without
Yes I agree it was REALLY stupid but the penny dropped (about the black
hat and the spam or worse) immediately after that email, so I changed
the password, before sending the "retraction" in (my next email), thats
why no-one could access the account. When I logged back into it I was
extremely fort
On Sat, 12 Jan 2008, Philip Aston wrote:
> Yes I agree it was REALLY stupid but the penny dropped (about the black
> hat and the spam or worse) immediately after that email, so I changed
> the password, before sending the "retraction" in (my next email), thats
> why no-one could access the accou
wow. i am sorry philip, but that was one of the stupidest things i
have ever seen on the web. what i had in mind was for you to get some
website space, and put it up there. not for you to get an email
account, and post the login info to the entire world.
i cannot login to this account to change th
Thanks Allan and Theodore
I have posted the following:
red.pnm
green.pnm
blue.pnm
sample2.pnm
(titles here self explanatory)
Also the spec file from the manufacturer's disk- not much info but may
be useful
They man be found by signing into hotmail account
sanephilipaston at hotmail.co.uk password
if you can put a small pnm up on the web somewhere demonstrating the
problem you might get more help, but it sounds like a calibration
issue, which can be fairly specific to the chip involved, and without
docs can be difficult to get right.
allan
On 1/9/08, Philip Aston wrote:
> Listed as minima
Listed as minimal support.
With the artec firmware 1200.usb installed, this scanner works with 2
bugs:
1 crashes @ 1200dpi, ok other resolutions-
2 probably more important, there are slight discolorations, the colour
is reproduced but slightly darker, running vertically every 5mm, giving
an impress
On Wed, 9 Jan 2008, Philip Aston wrote:
> Listed as minimal support.
> With the artec firmware 1200.usb installed, this scanner works with 2
> bugs:
> 1 crashes @ 1200dpi, ok other resolutions-
> 2 probably more important, there are slight discolorations, the colour
> is reproduced but slightly
Hi,
I'm currently trying to add support for this scanner to the artec_eplus48u
backend (thanks to Hans-Joachim Krause for his help).
If someone else owns this device too, then please test the modified backend:
http://www.angelfire.com/linux/crapsite/artecepluspro.html
Thanks
Michael
Btw, please
15 matches
Mail list logo
