Le mardi 11 septembre 2007, Christian Arnold a ?crit?:
> F7Y24
Hello,
how did you find that IC1 and IC3 are genesys part ? I am quite lost
finding
them (while also found that link to the Canon D1250U2, which seems an
interesting thing to dig).
Regards,
Stef
Hello,
there was a patch (by Luke) recently that allowed warming up to work
for the
HP2400. The following function in execution path to fix is
gl646_search_start_position() . A way to do it is to run the backend with
all the debug, and compare this output with what it does und
Le lundi 10 septembre 2007, Christian Arnold a ?crit?:
> St?phane VOLTZ schrieb:
> > Hello,
> >
> > I installed and have a quick look to the driver. Nothing definitive.
> > For the firmware, you effectively only have to record what happens when
> > you un- and replug the powercable.
> >
Le dimanche 9 septembre 2007, Christian Arnold a ?crit?:
> St?phane VOLTZ schrieb:
> > before opening the scanner, could you look at the driver's files under
> > windows ? They may have some informations in it about the hardware (files
> > name, strings in dll or other files).
>
> If you want a
Hello,
after digging a little more, I can't recognize a GL646 from the
usbsnoop log.
When looking at the 3000f driver, it looks really close to the 3200f. I think
it is the way that should be explored. The USB descriptor is really close,
the PID of the 3200f is the one followin
>
> Hi!
> Thanks for helping! I tried to open the case of the scanner. I was
> really gently and I couldn't open it! I used a plectrum but in the front
> there has to be another locking. Maybe i'll try again tomorrow, then
> I'll be able to tell you, what chips are in that scanner!
>
> Regards
> Ch
Le mardi 4 septembre 2007, St?phane VOLTZ a ?crit?:
> Le mardi 4 septembre 2007, Christian Arnold a ?crit?:
> > St?phane VOLTZ schrieb:
> > > Hello,
> > >
> > > my tool of choice to record USB traffic under windows is SniffUSB (you
> > > can grab it at http://stef.dev.free.fr/sane/outil
Le mardi 4 septembre 2007, Christian Arnold a ?crit?:
> St?phane VOLTZ schrieb:
> > Hello,
> >
> > my tool of choice to record USB traffic under windows is SniffUSB (you
> > can grab it at http://stef.dev.free.fr/sane/outils/index.html). Record a
> > simple session under windows, like doing
Le lundi 3 septembre 2007, Christian Arnold a ?crit?:
>
> Hello!
>
> How do I record this log? I'm pretty shure that the CanoScan 3000 Series
> should work after "some" coding with the genesys drivers, because of
> this SANE unsupported device information page
> http://www.sane-project.org/unsuppor
Le dimanche 2 septembre 2007, Christian Arnold a ?crit?:
> With the latest CVS-Release I successfully build sane-backends. The
> libsane-genesys is included. When I run sane-find-scanner I get this
>
> $ sane-find-scanner
> ...
> found USB scanner (vendor=0x04a9, product=0x2215, chip=GL660+GL646?)
Le jeudi 30 ao?t 2007, Fred Odendaal a ?crit?:
> Stef,
>
> I can't build the backend with the latest CVS checkout of the
>
> experimental code. Here is the error message I get:
> > gcc -c -g -O2 -W -Wall -DHAVE_CONFIG_H -I. -I. -I../include
> > -I../include -D_REENTRANT -I/usr/include/gphoto2
> >
Hello,
the experimental lexmark backend is now quite in a good shape. It
brings
other the current backend:
- 2 new USB id support (Dell A920 and Lexmark X12xx models)
- add support for new X11xx models
- add arbitrary scan area selection
- offset a
Hello,
I have mistakenly commit some experimental changes in the main tree. I
have
reverted them back:
wrong version pushed -> previous one
sane-backends/backend/Makefile.in1.142 -> 1.141
sane-backends/backend/lexmark-x1100.c 1.3 -> 1.2
Le samedi 4 ao?t 2007, Robert Brijder a ?crit?:
> Hi Leandro,
>
> Sorry for the very late reaction. I do have some information for you
> which may help.
>
> Look at the site http://zub.fei.tuke.sk/primax/ of Peter Popovec.
> It contains a sane backend for the E3 ASIC, which our scanners have.
> The
Le jeudi 2 ao?t 2007, Siddharth Naik a ?crit?:
> Hi,
>
> Am not able to access Umax astra 2000p scanner on my linux machines its
> not getting detected.
>
> Where as it gets detected on windows machine.
>
> Am using parallel port Scanner.
>
> When I issue scanimmage -l
>
> It says no
Le jeudi 26 juillet 2007, Miguel a ?crit?:
> I've working with the kodak i1320, making a standalone program to
> scan, based on sniffing the usb port.
> In the actual state the program scans and saves the images (both
> sides), at the same speed than in windows, and the next step for me is
> conver
Le jeudi 19 juillet 2007, Edward Barton a ?crit?:
> Trying to get a Lexmark scanner portion of a X1185 to work in Ubuntu
> 6.06 with Sane.
>
> Consistently get 3 error messages as follows: a) "Error during save:
> Broken pipes"
> b) "Error during save: Success" c) "Failed to execute printer
>
Le lundi 28 mai 2007, Shug Boabby a ?crit?:
> Hi all,
>
> My scanner is not supported, but the support page
>
>http://www.sane-project.org/cgi-bin/driver.pl?manu=Hewlett
> +Packard&model=2400
>
> says "GL646 based, to be added to genesys backend".
>
> If I understand correctly, this support has
Le jeudi 31 mai 2007, Luis P. Mendes a ?crit?:
> Hi,
>
> I'm running Slackware 11.0 and I am not able to use XSane.
>
> The problem is:
>
> $ xsane
> lp: Operation not permitted
> parport_pc: Operation not permitted
> Segmentation fault
>
> I've tried to solve this issue and I think I am close. Bu
Le mercredi 23 mai 2007, gmurray at cloudnet.com a ?crit?:
> Hugh wrote:
> > I wanted to know if anyone would like to look at them.
>
> I would like to see the filtered output. Please post/send me
> a url.
>
> In the initial URBS there seemed to be a lot of unnecessary data
> sent. In the first 1
Le mardi 15 mai 2007, Hugh McMaster a ?crit?:
> Hi Gerald,
>
> On 12/05/07, Gerald Murray wrote:
> > The chipset in the Canon Lide 70 is not yet known, but it did not respond
> > positively to gl841 or gl646, so it is will not at present work with the
> > genesys backend. It has only 2 bulk endpoi
Le samedi 5 mai 2007, Stefan G?ttsche a ?crit?:
> Hi, I'm unsure if I am correct in posting this here.
> To introduce myself shortly, I am a german living in France,
> and I run openSUSE Linux 10.2, KDE 3.5.6.
>
> First of all, I've got a problem with the sane-project website, or more
> precisely a
Hello
I found myself defining debugging levels quite a few time, and not
allways in
a consistent manner. So I'm thinking that having well knowns debugging levels
defined in sanei_debug.h would be a good idea.
However, it seems that after a quick grep for DBG_ in .h that
Le mardi 17 avril 2007, m. allan noah a ?crit?:
> On 4/16/07, m. allan noah wrote:
> > i dont subscribe to sane-commit, but i notice that cvs is tossing
> > several errors every time i commit a change. i think the scripts that
> > feed sane-commit are broken...
>
> seems to be an incompatibility b
Hello,
I haven't received any mail from sane-commit since 15/01. I've checked
my
membership and options, everythings seems right. Has anyone received mail
from sane-commit ?
Regards,
Stef
Le jeudi 5 avril 2007, sombriks a ?crit?:
> Hi guys this is my first mail.
>
> well, i have this scanner and it's still not supported (there have mail
> in mai archive about genesys backend from 3 years ago!), so i'm into an
> intersitng
> situation.
>
> My first question is why this backend does n
Le mardi 3 avril 2007, Jochen Lauber a ?crit?:
> Hello to everyone,
>
> I bought a TEVION MD90092 flatbed scanner at ALDI Sued two weeks ago. Since
> no support for Linux is included, I started to write a backend derived from
> the mustek_usb2.
>
> My Email with information request to the www.MEDI
Le mercredi 28 mars 2007, ??? ??? ??? a ?crit?:
> Good day, I have some problem with you patch for "sane-backends-1.0.17"
> pre-alpha-scanner.tar.bz2. After patching, my linux find the scaner,
> beginning scan, but not stopping. It knock some times in end and then
> return. In fini
Le dimanche 18 mars 2007, Fred Odendaal a ?crit?:
> Probably a permissions thing. I experienced a similar thing when
> upgrading to FC6. If you can see your scanner as root then for sure that
> is what the problem is. The workaround is to add a group called
> "scanner" and add the group to the user
Hello,
the current backend only handles early X1100 models. It is allready
known
that X1185 models can't work with it.
I am currently working on an experimental version of the lexmark
backend.
Currently, it detects X1185 variants (and X1200 models) and is able to do 75
Le jeudi 8 mars 2007, Daniel Padula a ?crit?:
> My name is Daniel, first of all, I am sorry for my english, I am from
> argentina.
>
> I am working on a linux distribution and I need to make Lexmark x1270 work,
> using Debian Testing.
>
> When I plug it, its detected by sane as 1100 series, and whe
>
> Hi Stef,
>
> I removed the # from the dll.conf file, and from the dll.conf.rpmsave file
> and when I do scanimage -L it says:
>
> [umax_pp_low] sanei_umax_pp_InitPort cannot use direct hardware access
> [umax_pp_low] if not compiled with --enable-parport-directio
>
> No scanners were identified
Le dimanche 4 mars 2007, Bryn Nobbs a ?crit?:
> Hi all, im having a problem with my Lexmark all-in-one X1190, I am under
> the impression the scanner is supported by the Lexmark backend but when I
> try to scan anything firstly the scanner makes a lot of noise for around 30
> seconds, then it seems
Le lundi 26 f?vrier 2007, Carlos a ?crit?:
> Hi
>
> I have a Lexmark X1130 AIO scanner-printer and Im glad to see there is a
> backend for this device. Ive tested it and the results are not so bad as
> the opinions in the sane page suggest.
>
> It needs some work with colors (maybe there is some w
Hello,
I've set up a page with tools and doc at
http://stef.dev.free.fr/sane/genesys
which let you start up some work. I haven't got the log yet, since the time I
created an email account to log in, the site is currently down. I'll try
later to get it, so we know at which point
Le lundi 12 f?vrier 2007, Emmanuel Counasse a ?crit?:
> Hi,
>
> I have activated debug information and attached to this mail the output of
> :
>
> scanimage -d genesys:libusb:001:005 2> debug.txt
> (see : http://www.sharebigfile.com/file/80076/debug-tar-bz2.html)
>
> The scanner has start its motor
Le mercredi 7 f?vrier 2007, adrian a ?crit?:
> Stef
> Thanks for prompt reply and thanks for the encouraging news. I was not
> looking forward to throwing out a perfectly good scanner!
>
> Results of your suggestions:
>
> [root@localhost adrian]# export -p
> declare -x SANE_DEBUG_UMAX_PP="255"
> d
Le mardi 6 f?vrier 2007, Adrian a ?crit?:
> Problem Detecting Scanner (HP3200C / Umax Astra 1220P) in Mandriva 2007
>
> Scanner worked under Mandriva 2006 (kernel 2.6.12) but not under
> Mandriva 2007 Cooker (kernel 2.6.17)
>
> Extracted from output from dmesg:
> (snip)
>
> loop: loaded (max 8
Le vendredi 2 f?vrier 2007, fsl a ?crit?:
> Greetings.
>
> Just a quick note tested against my Lexmark x1150 the lexmark x1100
> backend driver works well accept for one issue. When scanning as Lineart
> the image colors are inverted. Aka what should be white is black and
> what should be black is
Le lundi 29 janvier 2007, Robert Price a ?crit?:
> Thanks. Using this package, the scanner tries to back up past the physical
> end, then moves forward a bit, then tries backing up again repeatedly till
> killed. While this is happening, the debug output repeats:
>
> [lexmark] x1100_usb_bulk_read
Oops,
forgot to upload the archive. It's fixed now !
Regards,
Stef
Le samedi 20 janvier 2007 09:58, Dani ele a ?crit?:
> found USB scanner (vendor=0x043d, product=0x007d, chip=rts8858c) at
> libusb:002:006
>
> Your USB scanner was (probably) detected. It may or may not be supported by
> # SANE. Try scanimage -L and read the backend's manpage.
>
>
> The backend l
Le samedi 30 d?cembre 2006 23:02, Frank McCormick a ?crit?:
> Hello all
>
> I am trying to get a Umax 2000p scanner to work with my Ubuntu
> installation. So far no luck - I keep getting an error message which seems
> to indicate the SANE frontend or maybe the backends were not compiled with
>
Le jeudi 14 d?cembre 2006 21:18, m. allan noah a ?crit?:
> On Thu, 14 Dec 2006, Giuseppe Sacco wrote:
> > Hi Gerard and all SANE developers,
> >
> > Il giorno gio, 14/12/2006 alle 13.40 +0100, Gerhard Jaeger ha scritto:
> > [...]
> >
> >> But I think you are right, we are moving into a dead-end. We
Le lundi 11 d?cembre 2006 17:34, Tymoteusz.Drozd a ?crit?:
> hello,
> ok i've done log of preview and i compress its output by bzip, its
> weight approximately is 3.5MB.
> should i send it at sane-delvel ? or directly to you :).
>
>
> regards
There is a ~20K threshold on the list that wo
Hello,
the experimental version of the lexmark backend works with models
identified
by 0x043d:0x007c (X1100) and 0x413c:0x5105 (Dell A920). Your model may be
the same than the A920, and with slight modifications, you could try the
experimental version.
However, before
Le jeudi 7 d?cembre 2006 22:59, Tymoteusz.Drozd a ?crit?:
> Hi I have done scan under windows and i have decode of usbsnoop.log.
>
> This log should contain only preview scan but im not sure that.
> Log may contain more then only preview scan and i dont know how
> decode.sh and cmd.sh work in such
Hello,
here's the mentioned scripts. There are 2 main ones:
- decode.sh : turns raw usb log in higher level form
- cmd.sh : turns the output of the decoding in high level status dumps
The first script uses a swarm of little awk scripts that handle a
littl
Hello,
the Dell A920 is indeed a rebranded Lexmark. But the version of the
lexmark
backend only handles one model that does not match this one. It is also very
basic (no color offset/light calibration, and no shading correction). The
experimental version handles 2 models (the c
Le jeudi 2 novembre 2006 01:31, Olaf Meeuwissen a ?crit?:
> piotr_n writes:
> > Hi,
>
> Hi,
>
> > I have question if model Epson Perfection V100/V350 Photo scanners
> > are currently supported directly by sane. Yes I know iscan driver
> > (Image Scan! 2.3.0) exist but the plugins is only for rpm s
Hello,
only a very few things left:
- 111 : S?lectione => S?lectionne
- 122 : faile => faible
- 124: ?utiliser => ? utiliser
- 141: cannaux => canaux
- 182: Experimentation => Exp?rimentation
- 199: doceument => document
- 20
Hello,
what you miss is to also set debug for gl646 code
(SANE_DEBUG_GENESYS_GL646=255), then look in debug log the register set
written to scanner at each scan during warm up. Then search for differences
with the values registers should have, fix/modify the
gl646_init_regs_f
> If you wish -- so you don't need to keep checking stuff into cvs without
> knowing how the test will go -- I'd be happy to alter my copy of the
> sources in any way you suggest, then try it out and let you know how it
> goes. -- Whichever way you'd like to do it is good for me. Many thanks
> ag
Le samedi 5 ao?t 2006 01:33, Bill Dawson a ?crit?:
> Hi Folks,
> I reviewed the few threads concerning the 2300C from early in May of
> this year. E.g. here:
> http://lists.alioth.debian.org/pipermail/sane-devel/2006-May/016724.html
>
> I have the latest sources (2006-08-04) and have looked through
Le dimanche 30 juillet 2006 03:17, vous avez ?crit?:
> Stef,
>
> I haven't had a chance to spend any significant amount of time with it.
> I'm hoping to get to it in August when I have some vacation time. There
> is quite a bit of work yet to do on it.
>
> I'll start by stubbing out all the calibra
Hello,
I've put up an updated (codeflow+some tricks to extract picturs from
usblogs)
documention for genesys backend -for the GL646 part- at:
http://perso.modulonet.fr/~stefdev/sane/gl646-wip02.odt
I plan to add howt to fill the Genesys_Sensor struct with valeus
Le mardi 25 juillet 2006 01:00, Fred Odendaal a ?crit?:
> The X1270 is not supported by the X1100 backend. You are somewhat
> correct in your assumption of what is happening. The scanner is trying
> to find the home position by scanning in the reverse direction - looking
> for a set pattern off the
Hello,
I have started a document at
http://perso.modulonet.fr/~stefdev/sane/gl646.odt which is in early stages,
I'll improve it this next days.
Regards,
Stef
Le mardi 11 juillet 2006 01:36, Andre Robatino a ?crit?:
> My father has a Umax Astra 2000P parallel port scanner. At present
> it's accessible only as root. Before the advent of udev, it was
> possible to access as an ordinary user by changing the permission of
> /dev/parport0 from 660 to 666.
Le mardi 4 juillet 2006 11:51, Thomas Mader a ?crit?:
> Hello,
>
> I have a HP Scanjet 2400c and would like to know if I can help somehow to
> speed up the development of the driver for this?
> Can I provide some information about it or something else?
>
Hello,
this topic
Le mercredi 28 juin 2006 06:46, Rubens Matos a ?crit?:
> Okay, the log is attached.
> The scanner is working very fine under Windows.
>
Hello,
the very first sanei_usb_bulk_write is failing. Was this log taken just
after
the scanner was plugged in or were there some tests
Le lundi 19 juin 2006 19:24, mfi3 a ?crit?:
> Hello, I am an unhappy owner of Astra 4700 scanner. I cannot use it for
> some years (I am using almost only linux), since it isn't supported
> under my OS. A two or three years ago I had hope that my scanner will be
> supported by Genesys backend - but
Hello,
could you give the experimental lexmark backend a try ? Here are quick
instructions to build it from cvs, and run it without system-wide install.
First we get sane sources and patch them to get experimental version, and
compile it.
cd /tmp
mkdir testing
cd testing
cvs
Le Dimanche 28 Mai 2006 20:20, Fred Odendaal a ?crit?:
> Stef,
>
> You are correct about the dot. I've attached 2 files:
> find_start_lexmark1.pnm - This was with SANE_DEBUG_SANEI_USB=255
> find_start_lexmark2.pnm - This was with SANE_DEBUG_SANEI_USB unset.
>
> As you can see the picture gets bette
Le Dimanche 4 Juin 2006 18:51, Klaus K?bler a ?crit?:
> Hallo,
>
> I have installed the sane back end "sane-1.0.17-0.pm.0.i586.rpm" on my SUSE
> LINUX 10.0 system (Kernel Linux 2.6.13-15-default) using YAST2. I have got
> a incomplete error message from YAST2 when tying to install my "MEDION MD
>
Grr,
here's the mentioned picture .
-- next part --
A non-text attachment was scrubbed...
Name: find_start.pnm
Type: image/x-portable-pixmap
Size: 5205 bytes
Desc: not available
Url :
http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20060
Le Dimanche 21 Mai 2006 03:41, Fred Odendaal a ?crit?:
> St?phane,
>
> When I tried the default maximum scan size at 150dpi I got blue streaks
> down the middle of the scan. Also, it had the wrong initial y position
> as it scanned the area off the glass and didn't scan to the maximum y
> coordinat
Le Lundi 15 Mai 2006 15:02, Parag N() a ?crit?:
> Hi,
> I have your awk and shell scripts for decoding windows usb log. I
> first used decode.sh on usb2.log, it worked fine. Then on decoded log
> i used cmd.sh but its not giving at all any register values. why?
>
> attached
> 1)original windo
Le Vendredi 12 Mai 2006 16:02, Parag N() a ?crit?:
> Hi,
>Anybody is working on developing a backend for UMAX Astra 4100
> usb scanner?? It's having a Genesys GL646_HP chipset.
>Need Help in developing this backend. Here are those results
> that you people may want to look at
>
Thanks,
it is in CVS by now, with reduction of scanarea to 295 mm height.
Regards,
Stef
Hello,
after searching the debug data, I think there is no problem in start
position
detection (which is correclty reported to be 'top = 65'). In fact it seems
that it is the value added to the detected y position is bogus. Currently, we
add -2.0 mm which may lead in a negative
Thanks,
I've dowloaded what I need. You can get rid of it. From a first glance
the
search_position.pnm seems "too white". I'd expect that the dark area darker.
I'll let you know what I find.
Regards,
Stef
Le Samedi 6 Mai 2006 00:02, Michael Schachtebeck a ?crit?:
> ok, I'm using the daily cvs snapshot now, and even the command
>
> scanimage --mode Color -y 20 > scan.pnm
>
> drives the head very fast to the end until it "crashes" instead of
> scanning only the first 20mm...
>
> But if I use
>
> scan
Le Samedi 6 Mai 2006 13:15, Mark Hatton a ?crit?:
>
> I have tried with a value of 295 and it works great. No head crashes -
> everything just works.
>
> Thanks for your help,
>
> Mark
OK,
I'll put it in CVS soon.
Regards,
Stef
Le Vendredi 5 Mai 2006 12:06, Mark Hatton a ?crit?:
>
> The latest version in CVS fixes another issue with the 2300c for me. The
> stable version only lets you scan once and then the scanner can't be
> accessed again unless it is powered off and on again. The version in the
> CVS HEAD seems to solv
Le Jeudi 27 Avril 2006 12:32, Benedict a ?crit?:
> Hi,
> I'd need help in fixing "the head not stopping at the end problem."
> Here is the hardware information:
> lsusb
> Bus 005 Device 001: ID :
> Bus 004 Device 001: ID :
> Bus 003 Device 004: ID 046d:c03e Logitech, Inc. Premium Op
Hello,
you're right. Here's the latest package of the scripts.
Regards,
Stef
-- next part --
A non-text attachment was scrubbed...
Name: dist.tar.bz2
Type: application/x-tbz
Size: 9193 bytes
Desc: not available
Url :
http://lists.alioth.debian.org/
Le Mardi 18 Avril 2006 17:54, Henning Meier-Geinitz a ?crit?:
> Hi developers!
>
> I intend to start the countdown for the release of sane-backends
> 1.0.18 in a few weeks. So it's now the right time to include any big
> changes into sane-backends that are available. Especially big updates
> of exi
Hello,
I tested it and has expected it works. So I removed the idefed part and
only
keep your code.
regards,
Stef
Hello,
I had to put an ifdef WORDS_BIGENDIAN (like for slope tables), so that
my
MD6471 could work again after the endianess changes you done.
Regards,
Stef
Hello,
I have disabled power saving for GL646 based scanners in CVS, as it is
certainly the cause of your problems. This was overwritting some per model
CCD settings that aren't reset later, leading to 'black scans'.
Could you please test CVS version ?
Regards,
Le Lundi 6 F?vrier 2006 09:24, fr?d?ric hamelin a ?crit?:
> Hello,
>
> here is the log file.
>
> Thanks for your help !
>
> fh
>
Hello,
this log is not enough. I wrongly asked you for a 'scanimage -L', while
I
needed the log of a preview... ('scanimage 2>scan.log >scan.pnm'). Al
Le Vendredi 10 F?vrier 2006 13:40, Maarten Storm a ?crit?:
...
>
> Thanks for helping. I messed up the installation myself. The scanner
> works now! The colors are a bit strange. Do I have to change some
> sane-settings or is it because of the experimental stage?
>
> Regards,
> Maarten
Hel
Le Dimanche 5 F?vrier 2006 12:18, CSORDAS Laszlo a ?crit?:
> Canon Lide 60 working with backend MEDION MD5345 (genesys) :-)))
> -destitute 4 speed button-
>
> csola
Hello,
did you configure anything or did it work 'out of the box' ?
Regards,
Stef
Le Dimanche 5 F?vrier 2006 17:23, fr?d?ric hamelin a ?crit?:
> Hello,
>
> I have Sane 1.0.16 on Mandriva 2006 and my scanjet 2300c is recognised
> but I can't use it : it makes a stange noise and nothing happens.
>
> Can someone help me ?
>
> Thanks
Hello,
in a command shell, in o
Le Jeudi 2 F?vrier 2006 18:41, Maarten Storm a ?crit?:
> > Stef
>
> Thanks for your fast reply. I tried installing the experimental cvs, but
> still same problem. The scanner seems to start and then it locks. I
> think there is another problem also. I have attached the new log.
>
> Regards,
> M
Le Mercredi 1 F?vrier 2006 22:52, Maarten Storm a ?crit?:
> Hello,
>
> I have a dell A920 printer/scanner and thought that might be working
> with the lexmark backend in 1.0.17. It didn't work and I thought it
> might have to do with the dell thing. But in the january archives I read
> a post of so
Hello,
I have done the planned changes in cvs/experimental/lexmark directory.
The
Dell A920 is partially supported since only 75 dpi color scans are working.
Other modes will follow soon. Although I checked that the registers written
are unchanged for the X1100, there may be bu
Hello,
here are the scripts I talked to you. You run the 'cmd.sh' against the
log
file processed by the 'decode.sh' I sent previously. What it does is
gathering high level actions, building a map of shadow registers, shading
tables and motor slopes. Then it dump the complete s
Le Jeudi 5 Janvier 2006 13:57, Johannes Meixner a ?crit?:
> Hello,
>
> in sane-backends 1.0.17 our compiler recognized the following
> uninitialized variables which I simply initialized with 0:
> ===
> --- backend/umax_pp_low.c.orig 2
Le Mardi 3 Janvier 2006 13:01, Henning Meier-Geinitz a ?crit?:
> Hi,
>
> On 2006-01-03 16:09, Parag N() wrote:
> > Thanks for reply but logs didnt work for me as they had taken
> > with some other usb sniffer. do you have any other working link also.
>
> No. But you could ask the p
Le Mardi 3 Janvier 2006 11:16, Parag N a ?crit?:
> Hello,
> It seems something is going wrong with my modification to
> genesys backend for HP2400 so i decided to ask one simple question
> again to have confirmation of modification of code.
> Does gl646_init_regs_for_warmup and gl646_init_
Hello,
I am aware of it, that's the "'I got one other report of this" meant.
A
little cryptic
BTW I can't connect to alioth:
nslookup alioth.debian.org
Server: 127.0.0.1
Address:127.0.0.1#53
** server can't find alioth.debian.org: SERVFA
Le Mardi 27 D?cembre 2005 15:20, Martin Jacobs a ?crit?:
> Hello,
>
> after downloading libusb-0.1.10a and 1.0.17 I repeated my tests
> with USB-Scanner Medion MD5345 and got the following results:
>
>
> Test environment:
>
> Linux box based on SuSE 8.1, dual P3 933MHz, 768MB, m/b MSI
> 694D-Pro (M
Le Lundi 12 D?cembre 2005 20:35, dmeret...@repsolypf.com a ?crit?:
> All/Oliver, how can I do a logic analysis? should i make it on Windows or
> Linux?. I would like to write a driver, but, i never did it before, if you
> help me, we'll do it.
>
> Thanks
>
Hello,
what you can do i
Le Mercredi 7 D?cembre 2005 10:06, Gerald Murray a ?crit?:
> Stef:
>
> Thanks for your comment on the "no warmup will succeed" area. I had
> not thought about that. I will continue working on it, my pace is
> rather slow, and I am missing the log that would show values to test/try
> in the regi
Hello,
sorry to have taken so long to answer, but I have little time and many
things
to do ... However, I believe it isn't helpful to modify the warmup that way.
You have to set up the right register values instead. Also, you have to make
sure that the scanner is using an area
Le Mardi 6 D?cembre 2005 10:59, Pierre Willenbrock a ?crit?:
>
> Please move those changes over to sane-backends cvs. I forgot you were
> still hunting bugs.
>
> Regards,
> Pierre
OK,
it's in CVS by now.
Regards,
Stef
Hello,
the HP2400 is no yet supported. There early elements in the genesys
backend
but it won't work. In theory, the 2400 is supposed to be like the 2300, but
with a 1200 dpi max resolution instead of 600.
What is left to do is to put the exact values needed in
genesys_
Le Mercredi 30 Novembre 2005 19:09, Henning Meier-Geinitz a ?crit?:
> Hi,
>
> On Mon, Nov 21, 2005 at 08:56:47PM +0100, St?phane VOLTZ wrote:
> > I'm afraid that fixing gl646 part of the genesys backend may take some
> > time. Maybe I'll have to ask for a delay.
>
> Do you have an estimate how
1 - 100 of 138 matches
Mail list logo
