Hi Ken,
works for me. Okay, I don't do heavy scanning, but scanning a couple of page
didn't resolve any problems or delay. If I recall corectly, you install
sane-backends on rasperry pi and edit also saned.conf to name the clients that
can connect to the scan server. On the client machine you ne
On Thu, 11 Mar 2010 21:17:09 +0100
Gerhard Jaeger wrote:
> On Wednesday 10 March 2010 14:59:04 Stuckey wrote:
> > Package: xsane
> > Version: 0.996-3
> >
> > My preview window looks like this: http://jhstuckey.com/Screenshot-4.png
>
> So what? What did the scanner do? Does the scanhead move?
>
On Wed, 10 Mar 2010 14:59:04 +0100
Stuckey wrote:
> Package: xsane
> Version: 0.996-3
>
> My preview window looks like this: http://jhstuckey.com/Screenshot-4.png
>
> I'm using an Epson Perfection 1250. The sane packages I have installed
> are as follows:
>
> rc libksane0
da1db7a.klaus.dah...@gmx.de>
References: <87tzz99fwv.wl%felix.k...@inka.de>
<20070103213905.fda1db7a.klaus.dah...@gmx.de>
Message-ID: <87mz4zaemm.wl%felix.k...@inka.de>
At Wed, 3 Jan 2007 21:39:05 +0100,
Klaus Dahlke wrote:
> I created some udev-rules for certain devices
On Sun, 05 Nov 2006 13:21:23 +0100
Daniel Golle wrote:
> ACTION!="add", GOTO="libsane_rules_end"
>
> # Hewlett-Packard ScanJet IIc
> BUS=="scsi", SYSFS{type}=="3", SYSFS{vendor}="HP ",
> SYSFS{model}="C1750A ", MODE="660", GROUP="scanner"
>
> BUS=="scsi", SYSFS{type}=="6", MODE="660
On Tue, 13 Dec 2005 17:38:14 +
Tony van der Hoff wrote:
> Hi list,
>
> I have a UMAX scanner in the SCSI bus, which is correctly detected as
> /dev/sg3. The .udevdb entry for this device is:
>
> P:/class/scsi_generic/sg3
> N:sg3
> S: scsi/host1/bus0/target5/lun0/generic
> M:21:3
> A:0
> R:0
On Mon, 6 Jun 2005 18:17:51 +0100
Tony van der Hoff wrote:
> Hi,
>
> I've persuaded my scanner to communicate with SANE over the USB, but am
> still failing to get it to scan. Maybe my configuration is at fault.
>
> SANE_DEBUG_UMAX=255 scanimage -d umax results as below, but I don't really
> un
On Mon, 22 Nov 2004 16:38:19 +0800 (CST)
Stephen Liu wrote:
> Hi Klaus,
>
> FedoraCore2
> ===
>
> Tks for your advice.
>
> --- Klaus Dahlke wrote:
>
> > you need to configure the kernel or at least the
> > module to get build.
>
> # ca
On Mon, 22 Nov 2004 01:18:29 +0800 (CST)
Stephen Liu wrote:
> Hi folks,
>
> I have been trying hours failing to make following
> scanner to work again. Previously It worked on RedHat
> 8 on this box
>
> Alfa SnapScan 310 connected to a ISA SCSI card
> FedoraCore2
> =
>
> This
Dear all,
the last days I experienced again some severe problems with Umax Astra 2200 SU
link to USB. I tried to scan 4 pictures, 10x15. I did a pre-scan first,
adjusted the scan area to the first picture and scanned successfully. After
selecting the scan area for the second picture and scanning
On Mon, 29 Dec 2003 04:37:42 -0500 (EST)
Charles Sprickman wrote:
> Hi,
>
> I just installed Sane 1.0.13 on FreeBSD 5.1. I have a Umax Astra 2200-US
> scanner (scsi and usb), but only have a USB interface on my workstation.
>
> The OS detects that there's a scanner plugged in:
>
> uscanner0:
On Fri, 31 Oct 2003 15:49:15 +0100
Peter Kindermann wrote:
> Hi,
>
> I use Umax 2200 (SU) with USB under SuSE 9.0 (Kernel
> 2.4.21-99). sane backend version 1.0.12. xscanimage (sane-frontends)
> 1.0.10.
>
> I have problem with scanning which some others in this list had too
> [1], but the answe
Hi all,
I have a multiple boot system, one is based on SUSE kernel 2.4.19, the another
is a gentoo 2.4.20 kernel. On both systems I use sane-backends-1.0.12 to a
Astra Umax 2200 SU via USB and libusb-0.1.7. On the SuSE-system the scanner is
identified correctly by sane-find-scanner and scanimag
On Mon, 28 Jul 2003 20:51:15 +0200
Henning Meier-Geinitz wrote:
> Hi,
>
> I've no idea about your specific problem but maybe some generic
> comments help:
>
> On Mon, Jul 28, 2003 at 01:16:05PM -0500, Matthew wrote:
> > From xsane I can "Preview" an image, but when I try to "Scan" an image
> >
On Fri, 13 Jun 2003 00:33:44 -0700 (PDT)
ope wrote:
> I have an UMAX Astra 2200 scanner that I connecting to
> through USB. My problem is basically this:
>
> When I use xsane I can preview as many times as I want
> without any problems. However, once I actually try to
> scan I sometimes have s
On Mon, 26 May 2003 16:07:20 +0200
blub wrote:
> Oliver Rauch told me to disable "Quality calibration". Than the scanner
> worked but only as far as I described above.
> I am running on Gentoo Linux With kernel linux-2.4.20-gentoo-r5. I use a
> Adaptec 2940U/UW SCSI Card. No errormessages, but
er you selected a scanarea in the menu.
>
> Oliver
>
>
> On Saturday 01 March 2003 21:38, Klaus Dahlke wrote:
> > Hi all,
> >
> > I have an Umax Astra 2200 SU linked to the USB port. Xsane version is 0.90,
> > sane-backend is 1.0.11. When sizing the scan area m
Hi all,
I have an Umax Astra 2200 SU linked to the USB port. Xsane version is 0.90,
sane-backend is 1.0.11. When sizing the scan area manually scanning is no
problem. But when setting the scan area via the selections on the preview
window the scanning starts, receives RGB data. The progress bar
On Sun, 26 Jan 2003 15:01:13 -0600
Frank Zago wrote:
> Klaus Dahlke wrote:
> > Hi all,
> >
> > I have a problem with my Umax Astra 2200 SU (it has both connectors, SCSI
> and
> > USB). SCSI and USB works fine with Win98 (i.e., hardware is okay), SCSI
>
Hi all,
I have a problem with my Umax Astra 2200 SU (it has both connectors, SCSI and
USB). SCSI and USB works fine with Win98 (i.e., hardware is okay), SCSI works
also under Linux (for various reasons I am thinking of switching to USB). When
attached to USB, scanner is detected by xscanimage o
20 matches
Mail list logo
