On Tue, 29 Apr 2003, Henning Meier-Geinitz wrote:
> Hi,
>=20
> On Fri, Apr 25, 2003 at 10:54:25AM +0200, Henning Meier-Geinitz wrote:
> [rintf()]
> > The line is:
> >=20
> > int bpp =3D rintf ((float) htonl (res.transfersize) / pixels);
> >=20
> > What about this:
> >=20
> > int bpp =3D
On Tue, 24 Dec 2002, c1...@mac.com wrote:
> I'm trying to setup a new SCSI scanner on a system using an Adaptec=20
> 2906 SCSI adapter. The system has a CD-RW drive connected via IDE-SCSI=20
> on internal IDE bus 2. The CD-RW is recognized and works perfectly. The=
=20
> Adaptec card is recognized
Hi all,
recently I got a used HP ScanJet 3400C without User's Manual and -
even worse - without AC adapter.
Now I need to know the input voltage of the scanner to find a suitable su=
bstitute
for the power supply.
On HP's scanner site I can only find the _input_ voltage of the _AC adapt=
er_, wh
On Wed, 13 Nov 2002, veeto wrote:
> Help unsubscribe
>=20
> ___
> Sane-devel mailing list
> sane-de...@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
^^
Here it is!
On Thu, 01 Aug 2002, Florian Zumbiehl wrote:
> Hi,
>
> I didn't get an answer when I sent this e-mail to
> mainman-ow...@www.mostang.com, so I hope to get the problem solved over
> the list...
What do you expect when you send mail to `mainman-owner'?
Do you know that person? 8-)
I certainly don't
On Sat, 22 Jun 2002, Carsten Neumann wrote:
> I.e.: for the UMAX 3400 the values of registers 0x56 and 0x57 are both 5 but
> written are 0x40 and
> 0x14 respectively.
This is only true for the actual scan, in other cases the values are NOT
ignored.
Sorry!
Carsten
these devices.
>
> Gerhard
>
> On Freitag, 21. Juni 2002 03:17, Carsten Neumann wrote:
> > Hi all,
> >
> > has anyone tested the Umax Astra 3400 with the latest sane (1.8) version?
> > Scanimage moves the carriage to the correct top position.
> > B
Hi all,
has anyone tested the Umax Astra 3400 with the latest sane (1.8) version?
Scanimage moves the carriage to the correct top position.
But when the actual scan starts the stepper motor is driven at a higher
frequency and the scanner
gets stuck there - and so does scanimage! :-(
I can't chec
Hi all,
is there any progress on the UMAX Astra 3400?
I've tried some changes of the umax1220u backend so the Astra 3400 should be
recognized but
without success.
IIRC someone claimed that the 1220 and the 3400 have similar hardware.
TIA
Carsten
On Tue, 07 May 2002, Douglas Gilbert wrote:
> Carsten Neumann wrote:
> > On Mon, 06 May 2002, Douglas Gilbert wrote:
> >
> >>Johan,
> >>In your kernel config (assuming you have built that kernel)
> >>turn off CONFIG_SCSI_MULTI_LUN . Some SCSI scanners do
d turning it to 4 or 5 but I
> get the same result, Do I use a Symlink in the dev directory or do I have to
> pass paramateers to the modprobe of aha52x?
> Any help is much appreciated as at the moment sane is driving me well
> you
> know the rest.
> Cheers
> Johan We
On Mon, 06 May 2002, Douglas Gilbert wrote:
> Johan,
> In your kernel config (assuming you have built that kernel)
> turn off CONFIG_SCSI_MULTI_LUN . Some SCSI scanners don't
> react properly to being probed for logical unit numbers (luns).
> They should only respond to lun==0 but they respond to a
Hi, Johan,
you've missed to tell what your problems actually are!
I don't see any problem why you can't use your scanner.
But you haven't told that you cannot use it.
What are the errors you get, if there are any?
Carsten
On Mon, 06 May 2002, Johan Wehtje wrote:
> have read the docs as
On Sun, 05 May 2002, Anastasija wrote:
> Trying to load g_NCR5380.o (it was present and installed with the
> system), if I use
> modprobe g_NCR5380
> modprobe g_NCR5380 ncr_53Ó400a=1
> modprobe g_NCR5380 ncr_53Ó400a=1 ncr_addr=0x280
> modprobe g_NCR5380 ncr_53Ó400a=1 ncr_addr=0x280 ncr_irq
14 matches
Mail list logo
