[sane-devel] Network backend and lineart mode

2012-07-30 Thread Stef
On 30/07/2012 21:57, Stef wrote: > Hello, > > could you send me the exact scanimage command you use on the > client side ? > > Regards, > Stef > > Hello, I eventually reproduced the bug. Now I'm looking into fixing it. Regards, Stef

[sane-devel] Network backend and lineart mode

2012-07-30 Thread Stef
Hello, could you send me the exact scanimage command you use on the client side ? Regards, Stef

[sane-devel] Schedule for release of sane-backends 1.0.23

2012-07-30 Thread m. allan noah
Rudi- thanks for the reminder. I committed your patches last week, but I've been so busy I forgot to say so. Thanks again! allan On Mon, Jul 23, 2012 at 10:04 AM, Ruediger Meier wrote: > On Thursday 19 July 2012, m. allan noah wrote: >> There is quite a bit of updated code (and many months) sinc

[sane-devel] [PATCH 1/1] kvs1025 : Fix Paper range support

2012-07-30 Thread m. allan noah
Committed, thanks! allan On Fri, Jul 27, 2012 at 8:07 AM, Matthew Wild wrote: > Current Panasonic KV-S1025c driver kvs1025 is limited to A4 paper scanning. > This path extends the limits to the actual capabilities of the scanner and > allows for suitably long scans. > > > --- kvs1025.h 2012/0

[sane-devel] Network backend and lineart mode

2012-07-30 Thread Stef
one. > Seems I should try trunk version. >> Test with emulated lineart disabled. > Yes, it works with --disable-dynamic-lineart=yes >> Using a wrapper script (redirecting stderr to file) could be enough, >> and telling xinetd to use it instead of the current program. > Wrapper script for some reason does not work. A feeling that saned > ignores the environment variables. But I ran it in standalone mode :) > Log attached. >> >> Regards, >> Stef >> > Hello, I cannot reproduce your bug running directly scanimage with the same parameters than you : scanimage -d genesys --resolution 75 --width 213.2 --mode Lineart 2>rl.log >rl.pnm I am now going to set up saned. Regards, Stef -- next part -- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20120730/a62ac575/attachment-0001.html>

[sane-devel] Network backend and lineart mode

2012-07-30 Thread Aleksandr Dezhin
u use, surely some issue with the amount of bytes to send. >> I remember fixing such a bug for lide100/200 after 1.0.22 release, >> but this may be another one. > Seems I should try trunk version. I tried the git version (on "server" side), lineart mode does not work without disable-dymanic-lineart=yes. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20120730/7198b84d/attachment.html>

[sane-devel] ERROR DURING READ: Error during device I/O

2012-07-30 Thread m. allan noah
Ok, looks like you will need to get some additional debugging info from the pixma backend: SANE_DEBUG_PIXMA=255 saned -d5 allan On Mon, Jul 30, 2012 at 2:20 PM, bseos wrote: > > My apologies, here is the log: > > Tomato v1.28.9007 MIPSR2_RAF K26 USB VPN-NOCAT > root at E3000:/tmp/home/root# san

[sane-devel] Network backend and lineart mode

2012-07-30 Thread Aleksandr Dezhin
100/200 after 1.0.22 release, but > this may be another one. Seems I should try trunk version. > Test with emulated lineart disabled. Yes, it works with --disable-dynamic-lineart=yes > Using a wrapper script (redirecting stderr to file) could be enough, > and telling xinetd to use it instead o

[sane-devel] ERROR DURING READ: Error during device I/O

2012-07-30 Thread bseos
Ok, here it is: root at E3000:/tmp/home/root# SANE_DEBUG_PIXMA=255 saned -d5 [saned] main: starting debug mode (level 5) [saned] read_config: searching for config file [saned] read_config: done reading config [saned] saned (AF-indep+IPv6) from sane-backends 1.0.22 starting up [saned] do_bindings:

[sane-devel] ERROR DURING READ: Error during device I/O

2012-07-30 Thread m. allan noah
You must disable xinetd before you run saned -d5. allan On Mon, Jul 30, 2012 at 12:44 PM, bseos wrote: > > Installed sane-backends on my router flashed with TomatoRAF/USB using this > guide: http://www.shcherbyna.com/?p=983 shcherbyna.com/?p=983 > > When running xsane i can hear the scanner mov

[sane-devel] ERROR DURING READ: Error during device I/O

2012-07-30 Thread bseos
My apologies, here is the log: Tomato v1.28.9007 MIPSR2_RAF K26 USB VPN-NOCAT root at E3000:/tmp/home/root# saned -d5 [saned] main: starting debug mode (level 5) [saned] read_config: searching for config file [saned] read_config: done reading config [saned] saned (AF-indep+IPv6) from sane-backend

[sane-devel] ERROR DURING READ: Error during device I/O

2012-07-30 Thread bseos
Installed sane-backends on my router flashed with TomatoRAF/USB using this guide: http://www.shcherbyna.com/?p=983 shcherbyna.com/?p=983 When running xsane i can hear the scanner moving/scanning the image, but it seems when it is retrieving/transferring the image i get this error: ERROR DURING

[sane-devel] [epkowa] scangui can't connect to scanner

2012-07-30 Thread Olaf Meeuwissen
K?re S?rs writes: > I got a bug-report about failure to open an Epson network scanner with > scangui/skanlite. Thanks for mentioning it. I've registered it with our internal bug tracker. Don't know when we will get around to looking into it. Sorry this doesn't help much right now, -- Olaf