You need to change the IP in the configuration of your CUPS print queue,
HPLIP gets this info from there also for the non-printing functions.
Till
Jim wrote:
> I had to change IP address in router. Now, sane cannot find
> printer/scanner/fax (HP 7410). Have looked for 4 hours for locat
Hi!
I'm using Epson RX700.
Both epson (cvs) and epkowa shows me, that i can scan only with
100,400,1600 and 3200 dpi.
But, according to epson's specs
(http://files.support.epson.com/htmldocs/rx700_/rx700_00rf/spec_3.htm),
i can scan from "50 to 6400 dpi (in 1 dpi increments)".
I did'nt see "6400 d
Hello all. I'm trying to use a HP Scanjet 7400C via USB and am
having problems.
1) Nasty-sounding shoe-shining during scans. Happens even at
resolutions/depths that you would think a USB 2 port can take (300
DPI colour, around 2.5 MB/s if I not mistaken).
2) Every few scans, the scanner will free
Le dimanche 9 septembre 2007, Christian Arnold a ?crit?:
> St?phane VOLTZ schrieb:
> > before opening the scanner, could you look at the driver's files under
> > windows ? They may have some informations in it about the hardware (files
> > name, strings in dll or other files).
>
> If you want a
/pipermail/sane-devel/attachments/20070909/d2fb2334/attachment-0001.htm
Stef,
I've finished testing the experimental code on my X1185 and it works
well. It is much slower than the current backend - probably due to
shading calculations during the scanner reads. This may be optimized. I
know there is a double buffer copy that I put in that can probably be
removed. S
are you asking us how to change the ip of the machine, or how to
change the ip that sane uses to find it? if the latter, then i guess
you need to read the docs for the backend you use to access the
scanner.
allan
On 9/9/07, Jim wrote:
> I had to change IP address in router. Now, sane can
Hello,
As far as I can tell this is a FAQ, except that I've seen
the question pop up in many places (including, for example,
the Avasys forums), but without any answers.
I'm running Fedora Core 4, and have sane-backends 1.0.17-0 installed,
as well as iscan 2.8.0-1. My scanner is an Epson Perfecti
I had to change IP address in router. Now, sane cannot find
printer/scanner/fax (HP 7410). Have looked for 4 hours for location(s)
to change IP address in Sane. The 7410 prints OK, but Xsane can't find
printer. Investigation reveals it still has old IP address. Where
can I go to change it
St?phane VOLTZ schrieb:
> before opening the scanner, could you look at the driver's files under
> windows ? They may have some informations in it about the hardware (files
> name, strings in dll or other files).
If you want a look at the driver files, you can download them directly
from
10 matches
Mail list logo
