Hi,
>I'm using an Agfa SnapScan 310 scanner, its working just fine.
> However, its status shows 'good' rather than 'complete' in the
> support matrix at sane-project site. I would like to know which
> features are still unimplemented (or where to find this information
> if it's available) and
2006/5/23, Henning Meier-Geinitz :
>
> Do you get any error messages in syslog? And your kernel uses udev,
> i.e. other udev rules work?
>
Based on the file I sent, how can I know that?
--
Eye halve a spelling chequer, it came with my pea see
It plane lee marques four my revue miss steaks aye ca
On Sat, May 27, 2006 at 09:54:51AM -0400, m. allan noah wrote:
> 2. plug in and turn on the scanner. make sure it has a terminator on the
> second plug (if it has a second plug)
2.5. wait until the scanner finishes its initialization (LED stops blinking)
> 3. modprobe aic7xxx
I use the Astra 12
Wow! It work like a charm, and Kooka is a wonderfully intuitive application!
The four steps suggested by Allan made it! I had in fact unplugged the
terminator and wouldn't have thought of it otherwise.
Anyhow, my family thinks I'm a great guru now! ;)
Thanks all for the kind help!!!
Thanks!
On Sat, 27 May 2006, Get A. Long wrote:
> Hi all,
>
> Thank you all for your helpful comments!
>
> I went out and bought a PCI-SCSI card (Adaptec AHA-2904) + a noname optical
> mouse + a set of El Cheapo SoundBlaster speakers + an Animatrix DVD . All for
> 16$. So, I feel it was worth the 400 yd
Hello,
some questions:
If the line "option disable-calibration" in the avision.conf is commented
out the scanner works after doing:
scanimage -d avision >t.pnm (closed Door, no Tray)
scanimage -d avision --frame 1 --resolution 1200 >bild.pnm (open door,
tray with negatives)
But the scanned n
ail/sane-devel/attachments/20060527/2afde609/cs2-ls50-full.bin
From g3t4l...@hotmail.com Sat May 27 13:15:23 2006
From: g3t4l...@hotmail.com (Get A. Long)
Date: Sat May 27 13:32:58 2006
Subject: [sane-devel] Parallel Port as SCSI
In-Reply-To: <20060526150312.ga28...@fales-lorenz.net>
Message-ID:
Hi
