Hi,
I recently bought a Dell 1600n network printer/scanner/fax/copier. The
printer function works fine with linux as a generic postscript device.
Network scanning is Windows only. It also has a USB interface although I
haven't tried it (the only Windows machine I have with a USB port runs NT4
an
On Sun, May 29, 2005 at 01:06:25PM +0300, Ivan Kalvachev wrote:
> I would like to know if scanjet 2400 (using GL_646_HP) is supposed to
> work with experimental genesys or genesys-new.
>
> I had compiled them both (using sane-cvs) but none of them seems to
> work. I wonder is there sense of sendin
Dear listmembers,
I use a Mustek Scanner (since years) but now decided to upgrade my system f=
rom=20
SuSE 8.1 to (in the meantime) SuSE9.3)
I had had the scanner connected to the same SCSI-bus as the harddisk and th=
e=20
cdrom and the zip-drive, but in the meantime this became impossible.
So I ad
--=4186B44D000C5E36/loggedin.posti.suomi24.fi
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: quoted-printable
--=4186B44D000C5E36/loggedin.posti.suomi24.fi
Content-Type: message/rfc822
Content-Disposition: inline
Received: from [127.0.0.1] by loggedin.
>> The only thing that needs to be changes to see that it actually is GL6=
60+GL646
>> is to take away only the very last of the tests (tools/check-usb-chip.=
c
>> "if (val !=3D 0x15)... reg 0x4e !=3D reg 0x38"-test) after that other =
tests
>> seem to pass just fine and 'sane-find scanner -v -v' r
Hi,
On Sun, May 29, 2005 at 04:08:27PM +0300, a...@suomi24.fi wrote:
> >> The only thing that needs to be changes to see that it actually is
> >> GL660+GL646
> >> is to take away only the very last of the tests (tools/check-usb-chip.c
> >> "if (val != 0x15)... reg 0x4e != reg 0x38"-test) after th
I would like to know if scanjet 2400 (using GL_646_HP) is supposed to
work with experimental genesys or genesys-new.
I had compiled them both (using sane-cvs) but none of them seems to
work. I wonder is there sense of sending detailed bugreport if they
are not supposed to work at all (genesys-new
Hi,
On Sun, May 29, 2005 at 12:57:20AM +0300, a...@suomi24.fi wrote:
> After a while looking into QS Scan08/09/11/113 vs. GL6xx/GL84x chipsets,
> it seems that CanoScan 3000/3000F/5000F have GL-chipsets as the packages
> found on the actual 3000F hardware suggests LQFP128(GL646) + TQFP48(GL660)
>
Hi,
On Sat, May 28, 2005 at 10:23:02PM +0100, Calum Polwart wrote:
> I have a Samsung SCX-4100 Multifunction Printer / Scanner which seems to
> be using sane following installation of the scanner using the samsung
> disks. It is running on Fedora Core3, and I can scan using xsane.
>
> I am try
Calum Polwart wrote:
> *[sanei_wire] sanei_w_array: DECODE: maximum amount of allocated
> memory exceeded (limit: 1048576, new allocation: 3180390528, total:
> 3181439104 bytes)*
> [net] sane_get_devices: ignoring rpc-returned status Unknown SANE
> status code 1768846189
Funny. Do you have the s
After a while looking into QS Scan08/09/11/113 vs. GL6xx/GL84x chipsets,
it seems that CanoScan 3000/3000F/5000F have GL-chipsets as the packages
found on the actual 3000F hardware suggests LQFP128(GL646) + TQFP48(GL660=
)
-combo that is not used on any of the QS/Scan-chipsets (I bet no-one is
inte
11 matches
Mail list logo
