Eddy,
Without inetd...
scanimage hung and when I ctrl-c'd out of scanimage I get the following
"scanimage: received signal 2
scanimage: trying to stop scanner "
saned did not quit. When I killed it, the saned window showed these last
few lines
"[saned] do_scan: read 0 bytes from scanner
[sane
On Thu, 2004-01-08 at 22:09, Olaf Meeuwissen wrote:
> > # scanimage -L
> > device `epson:/dev/usb/scanner0' is a Epson GT-9300 flatbed scanner
> >
> > I know that my scanner is NOT an Epson GT-9300!
>
> You may know that, but your scanner doesn't ;-)
> The problem is that EPSON decided to market t
Hi,
On Thu, Jan 08, 2004 at 08:14:21PM -0100, gerard klaver wrote:
> For the teco2 backend i use at the moment the white_level option for
> manual changing the calibration value downloaded to the scanner.
>
> To improve the calibration part i made a patch to add the white_value_r,
> white_value_g
I had heard that my EPSON Perfection 2400 scanner was supported by
SANE. I plugged it into the USB port on a computer running Red Hat
Linux 9.0, installed SANE from source, and then ran the
"sane-find-scanner" program. I got the following output:
# sane-find-scanner
# No SCSI scanners found.
Hi,
On Thu, Jan 08, 2004 at 02:17:24PM -0500, Noah Daniels wrote:
> Basically, sane-find-scanner finds the scanner, but scanimage -L does
> not. However, if I set SANE_DEBUG_PLUSTEK to a high number, the
> scanner DOES start working, and scans a partial low-res image before
> hanging. I know this
--=-Lw22ZeX4kRPdnNnSmr7q
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Hello,
For the teco2 backend i use at the moment the white_level option for
manual changing the calibration value downloaded to the scanner.
To improve the calibration part i made a patch to add the white_value_r,
Hi,
On Thu, Jan 08, 2004 at 09:24:51AM -0800, Christopher Marshall wrote:
> That's because the plustek backend looks in the current directory and if it
> finds a plustek.conf
> file there, uses it instead of the one in /etc or /usr/local/etc. That
> really threw me for a
> loop.
All SANE confi
Hi,
On Thu, Jan 08, 2004 at 11:45:03AM +0200, Harri Järvi wrote:
> I'm starting to translate the backends .po file into Finnish.
> I'm also interested in translating the xsane frontend. So I'll probably
> do that too.
That's cool!
Once you have finished the translation for sane-backends, please
Hi,
I'm still having the same problem with the plustek backend that several people
have reported, even using this latest build of the various SANE packages.
Basically, sane-find-scanner finds the scanner, but scanimage -L does not.
However, if I set SANE_DEBUG_PLUSTEK to a high number, the scan
Jim George wrote:
> > 2) Without xinetd, no gdb
> >* Does scanimage hang?
> It didn't even get started. I got the following error message:
> scanimage: open of device net:localhost:mustek_pp:Mustek-1200CP failed:
> Invalid argument
Sorry, I forgot to mention this: you have to run saned as roo
Hi,
I'm starting to translate the backends .po file into Finnish.
I'm also interested in translating the xsane frontend. So I'll probably
do that too.
Yours,
Harri Järvi
Hi Eddie,
Some years ago I was in the same situation as you, but fortunatelly I
know about programming (more or less ;) I had to develop hp4200 backend
and I could obtain some results without too much documentation available
(later I could get much more docs and then improve my results). S
--- Christopher Marshall wrote:
> I had it working great through libusb on three different linux machines (all
> running slackware
> 9.0) for a week or so and now, all of a sudden, it either gives me black
> scans (vertical bands
> of
> black and white), or it makes a hideous noise (as if it is
I had it working great through libusb on three different linux machines (all
running slackware
9.0) for a week or so and now, all of a sudden, it either gives me black scans
(vertical bands of
black and white), or it makes a hideous noise (as if it is trying to move the
motor in the wrong
direct
Hello,
I just updated the umax backend (sane-umax) in the CVS.
Now it disables the quality calibration for the Astra 2200 SU via USB.
When the option is set then you can not do a final scan.
Please can someone with an Astra 2200 SU
a) connected via USB test the new version and confirm that
a1) th
15 matches
Mail list logo
