Henning Meier-Geinitz schrieb:
>
> Hi,
>
> On Tue, Aug 20, 2002 at 04:16:48AM +, Rene Bartsch wrote:
> > I'm using sane in the network and I don't want to work with
> > color-profiles at every client in every CAD/photo-software.
> >
> > So I'd like to know if it is possible to put one color-p
Rene Bartsch wrote:
[...]
>
> I want to create some ICC-like profile with an IT8-target. But I want to
> put it in somewhere centralized in the backend or server. There are
> Linux and Windoze clients and some are only setup for a few hours, so I
> don't want to do much setup on the clients ...
>
Hi all,
I'm proud to make available the first testing version of a
dust-removal facility for film scanners with IR readout. Currently it
is a stand-alone tool, but the actual algorithm is implemented in a
sanei library. The algorithm is so simple I can't think of a good
reason why I didn't come up
> I'm afraid that you will not have much luck with the current Sane
> version. But I think that ICC profiles should be supported in Sane 2.
> (With littlecms (http://www.littlecms.com) we have a good LGPL-ed ICC
> library available, so we _can_ actually support ICC. And with Scarse -
> Scanner
On Monday 19 August 2002 08:16 am, you struggled free to say:
&> Hi
&>
&> I have a Microtek USB scanmaker 3800 , but it seems that there ar no
drivers &> for this scanner. The scanmaker 3600 project doesn't seem to
support it. &> This scnanner is based on SCAN 08 chip
&> http://www.sq.com.tw/prod
Am Die, 2002-08-20 um 15.18 schrieb Henning Meier-Geinitz:
> Hi,
>
> On Tue, Aug 20, 2002 at 04:16:48AM +, Rene Bartsch wrote:
> > I'm using sane in the network and I don't want to work with
> > color-profiles at every client in every CAD/photo-software.
> >
> > So I'd like to know if it is p
Turns out I made a mistake when moving the sane-devel membership from
the old installation to the new one and as a result of this, everybody
was switched to regular (instant-delivery) subscription. I fixed this
now so that if you were subscribing for the digest before, you should
again be receivin
--qMm9M+Fa2AknHoGS
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Tue, Aug 20, 2002 at 11:02:40PM +0200, abel deuring wrote:
> Rene Bartsch wrote:
> [...]
>=20
> >
> >I want to create some ICC-like profile with an IT8-target. B
Hi,
On Tue, Aug 20, 2002 at 04:16:48AM +, Rene Bartsch wrote:
> I'm using sane in the network and I don't want to work with
> color-profiles at every client in every CAD/photo-software.
>
> So I'd like to know if it is possible to put one color-profile into the
> SANE backend/server ...
With
Hi,
On Tue, Aug 20, 2002 at 11:27:30AM +0200, r...@mediasolution.it wrote:
> This is my first post to the ML. I'd like to be more contributive, but
> right now I'm quite busy with other kinds of work.
Your first contribution was a very good spot. That bug hasn't been
found during the last 1.5 ye
Hi,
On Tue, Aug 20, 2002 at 03:49:01PM +0200, Bertrik Sikken wrote:
> I think it's a good idea to send an e-mail to Jonathan Buzzard, he
> keeps a list of scanners supported under Linux and their status.
> See http://www.buzzard.org.uk/jonathan/scanners-usb.html for USB
> scanners for example.
I
Hi,
[I have added a CC to sane-devel]
On Tue, Aug 20, 2002 at 02:13:52AM +0100, Matt Buckland wrote:
> >
> > Does scanimage -L show your v4l device?
> >
>
> Thankyou, but no it doesn't.
I can't really test v4l currently because it instantly freezes my
computer. But in principle, the backend shou
- Origineel Bericht -
Van: "Scudette"
Datum: Dinsdag, Augustus 20, 2002 12:02 pm
Onderwerp: [sane-devel] HP4470c
> I have reverse engineered a lot of this scanner some time back
> and have
> published a lot of this information on a web site:
>
> http://reapoff.sourceforge.net/hpscanne
Hi,
New in version 0.7:
Preview window:
-Automatic preview selection, which also works in "multi selection" mode (in
this case, images must be ordered top to bottom/one image per row).
Device selection dialog:
-The device selection dialog can be by-passed (useful for users with
only one scanner
Hi All,
This is my first post to the ML. I'd like to be more contributive, but
right now I'm quite busy with other kinds of work.
> > I know that the card works because I can run xawtv and get a picture.
> Does scanimage -L show your v4l device?
Does V4L devices detection works at all?
I mea
Hi,
seems that the response from the scanner was not correctly passed back.
Please have a look at http://www.kirchgessner.net/pub/sane/53c416.txt
and check if you have configured your card in a similar way.
--Peter
Johan van den Berg wrote:
> Hi,
>
> I'm geeting the following error message w
Hi,
first, I'm new to the list, so HELLO to all! ;o)
I'm using sane in the network and I don't want to work with
color-profiles at every client in every CAD/photo-software.
So I'd like to know if it is possible to put one color-profile into the
SANE backend/server ...
Thanx
Rene
Am Mon, 2002-08-19 um 21.48 schrieb Major A:
>
> Fantastic, I just got this back after posting to this list:
>
> > Due to an excess of spam, I've had to install a filter that
> > blocks email from anyone that I don't already have on my accept list.
> > If you would like me to actually get future
It is very probable that this scanner is relabeled and not a genuine
Epson, because it looks vry different to the others. It looks very cheap
for me.
Till
Karl Heinz Kremer wrote:
> This does not look good. Assuming that your Sane is working (and
> because you've got the other scanners to
Here is the contents of "scan.log":
[sanei_debug] Setting debug level of epson to 128.
[epson] sane_init: sane-backends 1.0.8
[epson] sane_init, >usb /dev/usb/scanner0<
[epson] sane_init, >usb /dev/usb/scanner0<
[epson] attach(usb /dev/usb/scanner0)
[epson] SANE Epson Backend v0.2.21 - 2002-04-22
I know, and this is which I am currently doing (until I install the next
Cooker with an appropriately patched kernel package).
Till
Karl Heinz Kremer wrote:
> As long as you have just one scanner, there is no need to update
> the scanner.h file in order to get your scanner recognoized: It's
When I use the "epson" backend for the Perfection 660, after some
minutes of waiting I get
[ epson ] error in receive - status = 5
[ epson ] ident failed
on the console from which I have started "xsane".
I have already added the new models to doc/description/epson.desc and
recompiled s
Thank you, I have sent the mail to him now.
Till
Bertrik Sikken wrote:
> - Origineel Bericht -
> Van: Major A
> Datum: Maandag, Augustus 19, 2002 11:43 pm
> Onderwerp: Re: [sane-devel] New Epson Scanners
>
>
>>Can you please send this list to David Nelson as well, he is
>>responsi
I have tried it now, both with auto-detection and with inserting the
device ID and device file name. The scanner was not recognized. Thank
you for the tip.
Till
Karl Heinz Kremer wrote:
> On Mon, Aug 19, 2002 at 10:56:01PM +0200, Till Kamppeter wrote:
>
>>Has anyone any idea how to get th
- Origineel Bericht -
Van: Major A
Datum: Maandag, Augustus 19, 2002 11:43 pm
Onderwerp: Re: [sane-devel] New Epson Scanners
> Can you please send this list to David Nelson as well, he is
> responsible for putting the device IDs into scanner.{c,h} (you can
> find his contact in those file
On Tuesday 20 August 2002 00:15, Rene Bartsch wrote:
>Am Mon, 2002-08-19 um 21.48 schrieb Major A:
>> Fantastic, I just got this back after posting to this list:
>> > Due to an excess of spam, I've had to install a filter that
>> > blocks email from anyone that I don't already have on my
>> > accep
26 matches
Mail list logo
