Hi Joachim,
the function that finds the scanning area and calculates the
dashed rectangle is included only in xsane if I'm not wrong.
That's why in xscanimage you have to draw the scanning area
by hand. I don't know the way xsane calculates the scanning
area but it might be an issue of the contras
Hi,
On Thu, May 16, 2002 at 05:50:56PM +, mattharre...@attbi.com wrote:
> Two nights ago I upgraded my Red Hat Linux 7.2 box to
> 7.3. Since then, my USB HP ScanJet 6200C (USB) no
> longer works.
Try "SANE_DEBUG_HP=255 scanimage -L". If there is no output from the
HP backend, you may have
Isn't the UMAX 3400 a LM983x based device?
Try the Plustek backend...
Gerhard
On Thursday, 16. May 2002 17:07, Carsten Neumann wrote:
> Hi all,
>
> is there any progress on the UMAX Astra 3400?
> I've tried some changes of the umax1220u backend so the Astra 3400 should
> be recognized but without
Two nights ago I upgraded my Red Hat Linux 7.2 box to
7.3. Since then, my USB HP ScanJet 6200C (USB) no
longer works. The sane-find-scanner command finds it
[found USB scanner (vendor = 0x03f0, product = 0x0201)
at device /dev/usb/scanner0], but "scanimage -L" does
not. lsmod shows scanner,
Hi all,
is there any progress on the UMAX Astra 3400?
I've tried some changes of the umax1220u backend so the Astra 3400 should be
recognized but
without success.
IIRC someone claimed that the 1220 and the 3400 have similar hardware.
TIA
Carsten
Hey, all!
Are there any Scan/Print/Fax combos known to work with Sane? Specifically
the scanner part is of interest, as faxing is usually done internally and
printing really should work.
Thanks, D.
--
D.
[ "2b" || ! "2b" ] ?
Danilo Godec wrote:
> Are there any Scan/Print/Fax combos known to work with Sane? Specifically
> the scanner part is of interest, as faxing is usually done internally and
> printing really should work.
Hi, Danilo. Most HP multi-function peripherals work. See
http://hpoj.sourceforge.net.
David
Nordine Tbahriti wrote:
> I have a brand new HP scanjet 4470c (usb and parallel port) connected to the
> usb port and I cannot make it work. Is it supported ?
No.
Bertrik
