Most AGM's don't like voltage that high and it swells the battery and
destroys its storage capability alot of the time
Jerry
On Fri, Jul 22, 2022, 7:50 PM Steve Higgins via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:
> William,
>
> If the battery cases swelled, they saw over 52 degree
Outback controllers have a tendency to be a bit slow.
So they can definitely get higher than the set points but only for a second or
two which is not going do damage anything. I’ve seen them do this.
Especially if it’s a larger array, sealed batteries and when the batteries are
full and a loa
Is there an FNDC on this system? I’ve experienced some of the same issues
when the FNDC terminations were loose.
On Sat, Jul 23, 2022 at 11:56 AM Jay via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:
> Outback controllers have a tendency to be a bit slow.
>
> So they can definitely get
I have installed three of the Samlex EVO series in the last few years,
all 24V units and all with Midnite E-Panels, and all have worked
flawlessly. I've ordered all as preassembled units from Midnite.
Allan
On 7/20/2022 4:34 PM, Bradley Bassett via RE-wrenches wrote:
The Samlex EVO4248SP is a p
We’ve ordered one to try since we cannot get the PAEs.
I hope Magnum can resume shipping orders in the 38 weeks I was told!
Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1453 M St
Penrose Colorado 81240
Sent by Jeremy's iPhone. Sorry for typos and shorthand.
On Jul 23, 2022
One caution, Jeremy. The EVOs that I used are only available in 120V input and
output, and Magnum PAEs are split phase 120/240.
Allan
> On Jul 23, 2022, at 3:34 PM, Jeremy Rodriguez via RE-wrenches
> wrote:
>
> We’ve ordered one to try since we cannot get the PAEs.
> I hope Magnum can resum
6 matches
Mail list logo
