One of the biggest issues I find w/ battery installations is instead of using
larger capacity 2 volt cell batteries, there are “installers” that install
string after string of 6VDC batteries and wire them without buss bars, so the
last string contributes very little during discharge & gets very
Does anyone have a recommendation on a battery based inverter to AC Couple with
a Solar Edge 11400A-US Inverter that is already installed?
I have been working a lot with the Schneider Conergy XW+ Inverters for off grid
but have no experience AC Coupling them with a Solar Edge Inverter
Any recomme
You could ask them? I know the XW+ works fine with the SMA TL series grid
inverters. Phone: +1 866-519-1470
Email: re.techsupp...@schneider-electric.com --Dave
> Does anyone have a recommendation on a battery based inverter to AC Couple
> with a Solar Edge 11400A-US Inverter that is already in
Definitely agree and can't believe people still do multiple strings with
so much choice out there.
>From Red October, "one ping Vasili, one ping only" --Dave
> One of the biggest issues I find w/ battery installations is instead of
> using larger capacity 2 volt cell batteries, there are âinst
I am working with a similar situation. It looks like the Tesla Powerwall
will work.
Kevin Eigel
Ecohouse Solar
On Thu, Jul 19, 2018, 10:07 AM Larry Brown wrote:
> Does anyone have a recommendation on a battery based inverter to AC Couple
> with a Solar Edge 11400A-US Inverter that is already in
Larry.Outback Radian would work fine but you would need 2 of the 8kW
inverters for your ~11kW GT inverter. Outback recommends a maximum 75%
loading ratio when AC coupling. We have used a simple solid state relay
controlled by the Aux Out of the Radian to turn off one leg of the
SolarEdge or
Larry--Forgot to add on the original post--you would need three Magnum 4448s to
work w the 11.4 SolarEdge. Bill Hennessy
Berks Solar, LLC
371 Centennial Rd
Mertztown, PA 19539
o 610 682 4300
c 484 560 4666
NABCEP certified installer
PA contractor #44411
www.berkssolar.com
From: Larry Brown
I'm sure part of the problem is no load current circulation, but much of
the problem can be seen with a clamp on meter while charging. I've seen
parallel strings pulling 10 amps on one string and 1 amp on the far
end. Not subtle at all, and very easy to understand why it would lead
to unequal
Hey Wrenches!
That Camera it a FLIR-One.
https://www.amazon.com/FLIR-ONE-Thermal-Imager-Android/dp/B0
0W5PRY52/ref=sr_1_5?ie=UTF8&qid=1532009331&sr=8-5&keywords=flir+one+android
I bought mine a couple of years ago... at the time they were $350.00... now
the older models are cheaper... There is a
Larry
Outback Radians work great.
peter
- Original Message -
From: "Larry Brown"
To: "RE-wrenches"
Sent: Thursday, July 19, 2018 10:07 AM
Subject: [RE-wrenches] Ac Coupling
Does anyone have a recommendation on a battery based inverter to AC Couple
with a Solar Edge 11400A-US In
Larry
I have had very good luck with Outback both with the FX and the newer
Radian systems, have not tried this with the new "R" inverter system, we
have used the contactors to reduce production once the batteries are full
in the off gird application. Simple and strait forward and been good
Jerry
11 matches
Mail list logo
