Re: [RE-wrenches] older magnum MS - capacitor remedy

2015-02-18 Thread Baxter, Gary
Hi Greg Should be a minimum 300 vac usually 370 vac rated. Gary Gary Baxter Marketing Manager Magnum/Dimensions > On Feb 17, 2015, at 10:34 AM, Greg wrote: > > Gary, > > We've had problems from time to time with toyostoves and other sensitive > electronics not liking the waveform coming f

Re: [RE-wrenches] older magnum MS - capacitor remedy

2015-02-17 Thread Greg
Gary, We've had problems from time to time with toyostoves and other sensitive electronics not liking the waveform coming from the inverter. 50 mcf, what voltage? How is it wired? Is there a schematic and any other info on the Magnum site for this fix? Thanks! Greg Egan Remote Power Inc.

Re: [RE-wrenches] older magnum MS

2015-02-16 Thread Baxter, Gary
Sorry for the late reply. I did confirm what our customer support said which is the PAE models had the search mode setting improved but that was about it. In the case of sensitive controls it is most likely distortion causing the issue. As suggested a 50mf cap at the appliance sometimes can help

Re: [RE-wrenches] older magnum MS

2015-02-14 Thread Ray Walters
y 12, 2015 5:58 PM *To:*RE-wrenches *Subject:*Re: [RE-wrenches] older magnum MS Jay, I can't answer your question, but only relate that I had a similar experience. An early Magnum MS4448AE would not reliably start and run a modern hydronic boiler in an off grid home. I had opened a case with

Re: [RE-wrenches] older magnum MS

2015-02-14 Thread jay peltz
indelar > Sent: Thursday, February 12, 2015 5:58 PM > To: RE-wrenches > Subject: Re: [RE-wrenches] older magnum MS > > Jay, > I can't answer your question, but only relate that I had a similar experience. > > An early Magnum MS4448AE would not reliably start a

Re: [RE-wrenches] older magnum MS

2015-02-12 Thread Dana
since 1988" P Please consider the environment before printing this email. From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Allan Sindelar Sent: Thursday, February 12, 2015 5:58 PM To: RE-wrenches Subject: Re: [RE-wrenches] older magnum MS Jay, I ca

Re: [RE-wrenches] older magnum MS

2015-02-12 Thread Allan Sindelar
Jay, I can't answer your question, but only relate that I had a similar experience. An early Magnum MS4448AE would not reliably start and run a modern hydronic boiler in an off grid home. I had opened a case with Magnum tech support, but the frustrate