Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Dave Angelini Offgrid Solar via RE-wrenches
The Franklin with capacitor Jbox at top of well helps with the surge. It is not what you would call soft start! An ammeter (or a loud generator) on a soft start pump will tell you what you have. A nice slow over 10 seconds ramping up of amps or gen noise when the pump is energized. You won't

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Darryl Thayer via RE-wrenches
I have off grid customers where I have them install 1/2 HP pump, also Franklin soft start seems to help, low cost but I do not know how it works, it has a start capacitor I think. On Wed, Oct 11, 2023, 1:23 PM James Jarvis via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > On Wed, Oct

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread James Jarvis via RE-wrenches
On Wed, Oct 11, 2023 at 1:14 PM Dave Angelini Offgrid Solar via RE-wrenches wrote: > Even the SQ pump without the controller will soft start and should work with > any inverter built for offgrid. > > The SQ pumps work great off grid. Easily run on 24 volt Magnum inverters without even flickering

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Dave Angelini Offgrid Solar via RE-wrenches
Look at a variable speed pump from Grundfos. Not as many choices for large pumping apps. The SQ Flex pump is basically a VFD when used with the controller. It can direct run from solar which tells you there is no surge. Even the SQ pump without the controller will soft start and should work

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread William Bryce via RE-wrenches
For high surge and unbalanced splitphase loads, you can’t beat a Midnite Solar Rosie Inverter. It uses Sic FET’s and is rock solid. I have an early unit and it’s starts my 5hp compressor and still runs other loads without a flicker. Runs loads that even my Schneider XW+ would not. Why complicate

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread frenergy via RE-wrenches
Interesting the variation in experiences. Most of my jobs are off-grid these days which almost always means a (reliable) well pump need.  I'd entertain the idea of 3-phase with VFD but that's quite a bit more  initial expense for this customer and possible higher long term costs with the VFD eq

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Chris Sparadeo via RE-wrenches
Hi Bill, I have yet to have an issue with the Sol Ark 12K and water pumps. We have numerous off-grid installations with 3/4 HP well pumps with no issues. I tend to find that compressors and inductive motor loads like chop saws are often an issue. Hope this helps, Chris On Wed, Oct 11, 2023 at 1

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Jerry Shafer via RE-wrenches
Chris, wrenches I have a few off grid or very close to off grid, I run well pumps, booster pumps, septic system pumps, no issues Fun times On Wed, Oct 11, 2023, 7:12 AM frenergy via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > > I'm looking for opinions and/or real world experience o

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Glenn Burt via RE-wrenches
Based on the youtube video of the Sol Ark vs Schneider, I would never promise a customer it would reliably start up a motor load...-GlennSent from my 'smart'phone, so please excuse typos and spelling errors.-- Original message--From: frenergy via RE-wrenchesDate: Wed, Oct 11, 2023 10:11

Re: [RE-wrenches] Well pump with Sol-Ark

2023-10-11 Thread Jay via RE-wrenches
I’d look at a 3 phase pump with vfd/soft start control and eliminate the start surge. Jay > On Oct 11, 2023, at 8:12 AM, frenergy via RE-wrenches > wrote: > >  > I'm looking for opinions and/or real world experience on recommendation for > the largest 240V submersible well pump the Sol-A