Re: [RE-wrenches] AM noise on batteryless inverters - Part 2

2010-06-24 Thread Exeltech
service. RFI filtering is a bit like filtering of internal combustion vehicle exhaust. You can reduce the unwanted/undesired aspects - but not eliminate them. Dan --- On Thu, 6/24/10, Exeltech wrote: > From: Exeltech > Subject: Re: [RE-wrenches] AM noise on batteryless inverters >

Re: [RE-wrenches] AM noise on batteryless inverters

2010-06-24 Thread Exeltech
o antennas that are commonly 50-100' or more from the inverter. There are some common steps you can try .. but in the end .. steps unique to the particular site may also be needed. Dan --- On Thu, 6/17/10, Darryl Thayer wrote: > From: Darryl Thayer > Subject: Re: [RE-wrenches] AM

Re: [RE-wrenches] AM noise on batteryless inverters

2010-06-19 Thread David Katz
riend...no noise can be detected on his ham radios. Bill Feather River Solar Electric 4291 Nelson St. Taylorsville, CA 95983 530-284-7849/6544 fax - Original Message - From: "jay peltz" To: "RE-wrenches" Sent: Friday, June 18, 2010 12:00 PM Subject: Re: [RE-wrenc

Re: [RE-wrenches] AM noise on batteryless inverters

2010-06-19 Thread David Katz
4291 Nelson St. Taylorsville, CA 95983 530-284-7849/6544 fax - Original Message - From: "jay peltz" To: "RE-wrenches" Sent: Friday, June 18, 2010 12:00 PM Subject: Re: [RE-wrenches] AM noise on batteryless inverters Hi Darryl, Personally I've tried this a

Re: [RE-wrenches] AM noise on batteryless inverters

2010-06-19 Thread frenergy
o: "RE-wrenches" Sent: Friday, June 18, 2010 12:00 PM Subject: Re: [RE-wrenches] AM noise on batteryless inverters Hi Darryl, Personally I've tried this and had no luck with offgrid But the issue is that a very competent installer friend, whos not on the wrenches has had issue

Re: [RE-wrenches] AM noise on batteryless inverters

2010-06-18 Thread jay peltz
Hi Darryl, Personally I've tried this and had no luck with offgrid But the issue is that a very competent installer friend, whos not on the wrenches has had issues with PV powered and AM radio noise, but not with SMA or Fronius. He's actually swapped inverters same location from PV to SMA and t

Re: [RE-wrenches] AM noise on batteryless inverters

2010-06-18 Thread Ken Schaal
Our last Midnite E-Panel, for an XW inverter, had two ferite rings, for the AC wires. Ken @ CommonWealth Solar - Original Message - From: "Darryl Thayer" To: "RE-wrenches" Sent: Friday, June 18, 2010 12:30 AM Subject: Re: [RE-wrenches] AM noise on batteryles

Re: [RE-wrenches] AM noise on batteryless inverters

2010-06-18 Thread Darryl Thayer
I have heard that putting small ferrite donuts around the AC and DC wires will reduce this noise. Place them inside the inverter. they are avaiable from DigiKey Darryl --- On Thu, 6/17/10, jay peltz wrote: > From: jay peltz > Subject: [RE-wrenches] AM noise on batteryless inverters > To: "R