Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Kirk Herander
Of Kirk Herander Sent: Thursday, June 25, 2020 2:07 PM To: re-wrenches@lists.re-wrenches.org [mailto:re-wrenches@lists.re-wrenches.org] Subject: Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s The master-slave config types and port assignments have always been confusing. The quick

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Kirk Herander
The master-slave config types and port assignments have always been confusing. The quick start guide lists a config where the master is port 1 and the slave is port 7. I believe port 7 is called the sub-master in this config. With only 2 inverters it functions as the slave to the master in port

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Chris Schaefer
enches@lists.re-wrenches.org > *Subject:* Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ > Mate3s > > > > The master-slave config types and port assignments have always been > confusing. The quick start guide lists a config where the master is port 1 > and the s

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread William Miller
not showing up on Hub10 or @ Mate3s The master-slave config types and port assignments have always been confusing. The quick start guide lists a config where the master is port 1 and the slave is port 7. I believe port 7 is called the sub-master in this config. With only 2 inverters it functions

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Jerry Shafer
the situation. Seems >>>> unlikely this will solve the problem, but it may provide some kind of clue. >>>> >>>> >>>> >>>> Also, did you try swapping primary and secondary? Run with secondary >>>> alone as

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Chris Schaefer
>>> >>> >>> >>> Also, did you try swapping primary and secondary? Run with secondary >>> alone as primary? >>> >>> >>> >>> William Miller >>> >>> >>> >>> *From:* RE-wrenches [mailto:re-wr

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Jerry Shafer
t; alone as primary? >> >> >> >> William Miller >> >> >> >> *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On >> Behalf Of *Chris Schaefer >> *Sent:* Thursday, June 25, 2020 10:35 AM >> *To:* RE-wrenches >&

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Chris Schaefer
try swapping primary and secondary? Run with secondary > alone as primary? > > > > William Miller > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *Chris Schaefer > *Sent:* Thursday, June 25, 2020 10:35 AM > *To:* RE-wrench

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Jerry Shafer
ris Schaefer > *Sent:* Thursday, June 25, 2020 10:35 AM > *To:* RE-wrenches > *Subject:* [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s > > > > G'Day All, > > > > So I started up a system recently with two Radian 8048A's. The master is > connec

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Jay
Did you try putting the slave inverter to port 1? Jay > On Jun 25, 2020, at 10:35 AM, Chris Schaefer wrote: > >  > G'Day All, > > So I started up a system recently with two Radian 8048A's. The master is > connected to port 1 and the slave connected to port 2 with the FlexNet at > port 3. Th

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread William Miller
-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s G'Day All, So I started up a system recently with two Radian 8048A's. The master is connected to port 1 and the slave connected to port 2 with the FlexNet at port 3. There are no OB charge controllers in the system. When the hub

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Roland - RES
Hey Chris, Sounds like a failed power supply board Outback part SPARE-215. If the unit is under warranty you should be able to get a replacement through OB tech support. > Sent from a IPhone, with touch screen keys on the fly. Please excuse > shortcuts and typos. > Roland Shackelford NABCE

[RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

2020-06-25 Thread Chris Schaefer
G'Day All, So I started up a system recently with two Radian 8048A's. The master is connected to port 1 and the slave connected to port 2 with the FlexNet at port 3. There are no OB charge controllers in the system. When the hub is polling (led's scrolling) nothing shows up for the slave at port 2