nches-boun...@lists.re-wrenches.org [mailto:
re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *jay peltz
*Sent:* Tuesday, November 19, 2013 10:33 AM
*To:* RE-wrenches
*Subject:* Re: [RE-wrenches] PV Wiring methods
Hi August,
I can only assume that the inspectors are talking about say runn
..
-Glenn
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of August Goers
Sent: Tuesday, November 19, 2013 12:39 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] PV Wiring methods
Hi All -
On a related note, I've become
Energy Corporation
> o: 415.641.4000
> m: 415.559.1525
> www.luminalt.com
>
>
>
> From: re-wrenches-boun...@lists.re-wrenches.org
> [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of William Miller
> Sent: Monday, November 18, 2013 11:33 PM
> To: &#x
m: 415.559.1525
> www.luminalt.com
>
>
>
> From: re-wrenches-boun...@lists.re-wrenches.org
> [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of William Miller
> Sent: Monday, November 18, 2013 11:33 PM
> To: 'RE-wrenches'
> Subject: Re: [RE-wrench
enches.org [
mailto:re-wrenches-boun...@lists.re-wrenches.org]
*On Behalf Of *frenergy
*Sent:* Thursday, November 14, 2013 7:46 AM
*To:* RE-wrenches
*Subject:* Re: [RE-wrenches] PV Wiring methods
William, Billfrom another Bill,
Two things: For the rest of us (maybe it's just me?
s.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of frenergy
Sent: Thursday, November 14, 2013 7:46 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] PV Wiring methods
William, Billfrom another Bill,
Two things: For the rest of us (maybe it's just me?!) that's
: 'RE-wrenches'
Subject: Re: [RE-wrenches] PV Wiring methods
William,
I know your long-time stance on conduit. It has its place. This report was
about an integrated PV system that caught fire because of a module
failure-this was not a cable management issue. We can all jump on our
ently the SS wire ties I was looking
at from Grainger were gold plated!
I appreciate all the input.
Bill
Feather River Solar Electric
- Original Message -
From: Ray Walters
To: RE-wrenches
Sent: Thursday, November 14, 2013 9:51 AM
Subject: Re: [RE-wrenches] PV Wiring me
ve people been using regular SS wire ties in the field
>> for 10-20 years, behind a roof mounted array without any issues related to
>> the wire ties?
>> Thanks for your help and patience,
>>
>> Bill
>>
>> Feather River Solar Electric
>> 4291 Nelson St.
&
Hi Bill,
I get mine from PV-cables
Less expensive and no minimum order
Cheers,
jay
peltz power
On Nov 14, 2013, at 6:21 PM, Bill Hoffer wrote:
> Jason
>
> I just started using Nine Fasteners, Inc www.ninefasteners.com . 410
> stainless wire management clips. Got turned on to them at SPI
Jason
I just started using Nine Fasteners, Inc www.ninefasteners.com . 410
stainless wire management clips. Got turned on to them at SPI this year.
They are awesome, same basic clip concept except they add a nice rounding
along the edges that keeps it from cutting into the wire. A step above t
Of
*William Miller
*Sent:* Wednesday, November 13, 2013 1:42 PM
*To:* 'RE-wrenches'
*Subject:* [RE-wrenches] PV Wiring methods
Bill:
I respectfully disagree with your logic: Define "perfectly
installed." If your connections are tight and permanent and the
conductors are protec
I'm ordering the Jason's PV wire clips. Vinyl coated metal will outlast
any plastic sip, and they clip into the slot on the rails: much cleaner
than a zip tie all the way around the rail. It doesn't cure all our
wire management issues, but it looks like it will solve some of it. In
combinati
That said [PV WireClips], wire management is often a matter of strong
opinion, and we are
far from standardization and an accepted set of best practices.
Jason Szumlanski
Fafco Solar
Jason,
Can your wire management procedures equal the 20, 25, or 30 year
warranty your modules offer? I hope
n if
you please.
Bill.
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of William
Miller
Sent: Wednesday, November 13, 2013 1:42 PM
To: 'RE-wrenches'
Subject: [RE-wrenches] PV Wiring methods
Bill:
I respectfully
ce for such
>>> things (Grainger) has "regular" SS wire ties that range from $1.50 to $3
>>> each, but none that I can see that address the sharp edge issue...or is
>>> that an issue? Have people been using regular SS wire ties in the field
>>> for 10-20 years,
CA 95983
> 530.284.7849 / 6544 fax
> "solar powered since 1982"
>
> - Original Message -
> From: "Bill Loesch"
> To: "RE-wrenches"
> Sent: Thursday, November 14, 2013 1:34 AM
> Subject: Re: [RE-wrenches] PV Wiring methods
I know we've had this discussion before, but I wanted to again recommend
the WireClips from PV Racking. We are using them on Enphase trunk lines,
and find them to be great for this purpose. At $0.25 each, they are cost
effective.
That said, wire management is often a matter of strong opinion, and
Augustthank youyou are right they are actually a Heyco
productmy bad!!! Ray, we recently got them thru
http://www.heilind.com/products/heyco/Heyco_solar.asp
Ray...Contact me off list and i will share my sales persons contact
info..
Cheers,
Sunny Regards,
Kirpal Khalsa
NABCEP Cert
esch" mailto:solar1onl...@charter.net>>
To: "RE-wrenches" mailto:re-wrenches@lists.re-wrenches.org>>
Sent: Thursday, November 14, 2013 1:34 AM
Subject: Re: [RE-wrenches] PV Wiring methods
>
> Hi William (and any other person who wishes to d
-wrenches.org] *On Behalf Of *Kirpal Khalsa
*Sent:* Thursday, November 14, 2013 8:42 AM
*To:* RE-wrenches
*Subject:* Re: [RE-wrenches] PV Wiring methods
Bill.we have been using the Hellerman Tyton Sunbundler cable
tiesThey are braided stainless steel wire with a UV resistant vinyl
jacketWe
ic
> 4291 Nelson St.
> Taylorsville, CA 95983
> 530.284.7849 / 6544 fax
> "solar powered since 1982"
>
> - Original Message -
> From: "Bill Loesch"
> To: "RE-wrenches"
> Sent: Thursday, November 14, 2013 1:34 AM
> Subje
- Original Message -
From: "Bill Loesch"
To: "RE-wrenches"
Sent: Thursday, November 14, 2013 1:34 AM
Subject: Re: [RE-wrenches] PV Wiring methods
>
> Hi William (and any other person who wishes to describe themselves as
> professional (designer, installe
Hi William (and any other person who wishes to describe themselves as
professional (designer, installer, etc.)),
Please accept this note as confirmation that your evangelism on wire
management has not fallen on entirely deaf ears.
Additionally, I'm curious how the practice of requiring a te
Bill:
I respectfully disagree with your logic: Define "perfectly installed." If
your connections are tight and permanent and the conductors are protected
from damage, you have a great chance of a reliable, safe lifetime of
service. How can you guarantee that your leads will stay protected af
25 matches
Mail list logo
