A little tweaking and we got it to sync. If you have the problem I
did, tech support can help. Matt at Outback tech support says the
grid tie FX inverters absolutely should sync with the Honda inverter
generators. This helps a lot with the lack of AC IN 1 and AC IN
2. This probably will not
DC power/battery charger supply. TUMP
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of
drake.chamber...@redwoodalliance.org
Sent: Saturday, October 31, 2009 9:57 AM
To: RE-wrenches
Subject: [RE-wrenches] Outback-
Drake,
I forgot to mention that I have had no luck getting a GVFX to lock onto
a generator.
John Blittersdorf
NABCEP Certified Solar PV Installer
Central Vermont Solar & Wind LLC
Rutland, VT 05701
802-747-0577
802-773-0924 fax
802-770-8625 cell
_www.cvsolar.com_ (http://www.cvsolar.com/
Drake,
I have had great luck just using an Iota battery charger with the Honda
Generators. Just pick a charger with an amp rating suitable for the
continuous output rating of the generator. My standard grid time with backup
system uses the Honda 2000i with an Iota charger. The nice thin
>
>
>
>
> -Original Message-
> From: re-wrenches-boun...@lists.re-wrenches.org
> [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of
> drake.chamber...@redwoodalliance.org
> Sent: Saturday, October 31, 2009 9:57 AM
> To: RE-wrenches
> Subject: [RE-
rg
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of
drake.chamber...@redwoodalliance.org
Sent: Saturday, October 31, 2009 9:57 AM
To: RE-wrenches
Subject: [RE-wrenches] Outback-Honda Sync problem
Your replies are greatly appreciated. On the testing, there were no loads
on the inver
Your replies are greatly appreciated. On the testing, there were no loads
on the inverter, and I reduced the battery charging amperage to 5 amps. I
went to do more testing, but the generator wouldn't start. In my limited
experience with the Honda EU series, these are usually easy starting
machin
7 matches
Mail list logo
