Hi Jeff,
Yep had this problem a many times.
The only "fix" I came up with was a new mate. Every time a new mate
went in, problem went away.
On the same note, I've got a Flexnet on a system and it seems less
reliable than the mate.
For example it was currently set to start at 55%, customer
Hello Jay and Tump,
I set up a mate for autostart six weeks ago. Before leaving the
remote job site I started the genny from the mate by raising the two
minute start voltage above the current battery voltage and waited two
minutes. The genny started confirming that the AGS was functioning
o:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Monday, December 15, 2008 11:33 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Mates Losing time & dates
Hi Mark,
No this issue I've had is that the mate just won't start the generator with
usual symptoms of system
Hi Mark,
No this issue I've had is that the mate just won't start the generator
with usual symptoms of system shut down.
But when I go to the mate and press start, generator starts right up.
All setpoints are correct. Replace the mate, and all is good, again
same setpoints.
So I can
, December 15, 2008 11:38 AM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] Mates Losing time & dates
Jay,
Funny you should mention this. A customer just called today to say that his
Mate has been failing to shut down his generator and they have been walking
into a smelly room full of boi
*jay peltz
*Sent:* Sunday, December 14, 2008 8:34 PM
*To:* RE-wrenches
*Subject:* Re: [RE-wrenches] Mates Losing time & dates
hi Tump,
There was a recall of the Flexnets due to them reseting at the end of
the month, could it be that?
The main thing I"ve had is the control of
ie.com/>
<http://www.pvsolarpumps.com/> <http://www.pvsolarpumps.com/>
www.PVsolarpumps.com
_
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Sunday, December 14, 2008 8:34 PM
To: RE-wrench
hi Tump,
There was a recall of the Flexnets due to them reseting at the end of
the month, could it be that?
The main thing I"ve had is the control of the AGS goes bad for some
reason. I have had no luck with "reseting" them, so I just replace
them and send the old ones back for reprogram
L&Gs (ladies & gentlemen)I have a quad stack OB system w/ flex net DCCA & a
mate 2. The Mate will lose the time & date settings repeatedly within a day
or 2 of resetting it. I'm not on site, so I'm not sure IF all of the other
settings get lost (I think not).
Question; anybody seen this happening?
9 matches
Mail list logo
