Re: [RE-wrenches] Enphase System Labeling

Ditto Kent. And thanks Marv for submitting changes. Explaining to the AHJ that it is ok to install enphase without rooftop disc switch is much easier with clear instructions from the manufacturer. Marv: "You're absolutely right. I'll submit changes to the manual for our > next round of complian

Re: [RE-wrenches] Enphase System Labeling

e-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of benn kilburn Sent: Wednesday, May 19, 2010 3:21 PM To: Wrenches Subject: Re: [RE-wrenches] Enphase System Labeling

Re: [RE-wrenches] Enphase System Labeling

rg] On Behalf Of benn kilburn Sent: Wednesday, May 19, 2010 3:21 PM To: Wrenches Subject: Re: [RE-wrenches] Enphase System Labeling   Thanks for sharing that Dana,   Are you required by code

Re: [RE-wrenches] Enphase System Labeling

renches Subject: Re: [RE-wrenches] Enphase System Labeling   Thanks for sharing that Dana,   Are you required by code or the AHJ, for micro-inverter systems, to have an additional AC d/c aside from the branch circuit breaker? (on t

Re: [RE-wrenches] Enphase System Labeling

Kent: Good points. Enphase may allow us to disconnect their DC connectors under load, but each of their connectors mates with a connector installed at the PV factory. The module makers usually say don't disconnect under load. So the inverter and the PV listings both need to allow disconnect

Re: [RE-wrenches] Enphase System Labeling

: Wednesday, May 19, 2010 3:21 PM To: Wrenches Subject: Re: [RE-wrenches] Enphase System Labeling   Thanks for sharing that Dana,   Are you required by code or the AHJ, for micro-inverter systems, to have an additional AC d/c aside from the branch circ

Re: [RE-wrenches] Enphase System Labeling

- 970.209.4076   From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of benn kilburn Sent: Wednesday, May 19, 2010 3:21 PM To: Wrenches Subject: Re: [RE-wrenches] Enphase System Labeling   Thanks for sharing that

Re: [RE-wrenches] Enphase System Labeling

, May 19, 2010 3:21 PM To: Wrenches Subject: Re: [RE-wrenches] Enphase System Labeling Thanks for sharing that Dana, Are you required by code or the AHJ, for micro-inverter systems, to have an additional AC d/c aside from the branch circuit breaker? (on the roof or other location) For these

Re: [RE-wrenches] Enphase System Labeling

tional one will of course need to be replaced and updated if/when the owner decides to add to his system. cheers,benn DayStar Renewable Energy Inc. b...@daystarsolar.ca780-906-7807 HAVE A SUNNY DAY From: d...@solarwork.com To: re-wrenches@lists.re-wrenches.org Date: Mon, 17 May 2010 14:29:1

Re: [RE-wrenches] Enphase System Labeling

I only use this signage, when its true. Gridtie inverters interrupt output in milliseconds, so I don't use it on AC. My understanding is that it does apply to array disconnects, as the inverter capacitors could still have a charge, that would render the "live on both sides" idea true on DC. I al

Re: [RE-wrenches] Enphase System Labeling

Quick poll- how many inspectors/utilities out there require the "live on both sides" label for AC Disconnects, even after you explain to them this only applies to DC disconnects? Even though it's inaccurate, I feel that it at least gives unqualified personnel pause before they open up a switch

[RE-wrenches] Enphase System Labeling

This was our last batch Labeling For Grid-tie Solar Electric System Great Solar Works, Inc., 970-626-5253 KNOPP SIGNS Qty - 2, Color red INTERACTIVE SYSTEM POINT OF INTERCONNECTION Enphase Micro-Inverters [1] per module [17] Total PHOTOVOLTAIC SYSTEM S

[RE-wrenches] Enphase System Labeling

wrenches, i'm having the lamacoid labels made up for an enphase system that i am installing and i am going with a 'rating' label on the load center which states; Solar PV System RatingArray Rating: 660 WDCModule Rating (each): 220WDC also a 'warning parallel system' which will also go on the load