Re: [RE-wrenches] Code reference needed

2010-12-06 Thread Exeltech
iring the unit be mounted more than 3 feet above the ground. Dan Sr. Engineer Exeltech --- On Sun, 12/5/10, Dave Click wrote: > From: Dave Click > Subject: Re: [RE-wrenches] Code reference needed > To: re-wrenches@lists.re-wrenches.org > Date: Sunday, December 5, 2010, 7:49 PM

Re: [RE-wrenches] Code reference needed

2010-12-06 Thread dan
Might be a "Manufacturer's Requirement" thing?... 110.3Dan BrownFoxfire Energy Corp.Renewable Energy Systems(802)-483-2564www.Foxfire-Energy.comNABCEP #092907-44 Original Message Subject: Re: [RE-wrenches] Code reference needed From: Drake <drake.chamber...@r

Re: [RE-wrenches] Code reference needed

2010-12-06 Thread Drake
At 03:20 PM 12/4/2010, you wrote: I, too, can't find the 2'-6" lower limit specified anywhere in the NEC 2008. I've seen very clean, industrial panels with switches less than a foot from grade. ___ List sponsored by Home Power magazine List Addres

Re: [RE-wrenches] Code reference needed

2010-12-05 Thread Dave Click
At a Xantrex training once upon a time, they explained that the three foot minimum height was to keep the unit out of reach of a typical lawn sprinkler. I don't know of an NEC reference for any minimum height required. Peter Parrish wrote: I spent some time putting together information on the

[RE-wrenches] Code reference needed

2010-12-04 Thread Peter Parrish
I spent some time putting together information on the "2'-6" Lower Limit" and the "6'-6" Upper Limit" for operable equipment; and then when I went to send out the results of my efforts, the content in the email disappeared. Since the information I thought would be helpful, I have re-assembled the i

Re: [RE-wrenches] Code reference needed

2010-10-26 Thread Drake
g [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Allan Sindelar Sent: Monday, October 25, 2010 11:12 PM To: RE-wrenches Subject: [RE-wrenches] Code reference needed Wrenches, what's the actual Code reference location for the requirement that service equipment be within 6" of t

Re: [RE-wrenches] Code reference needed

2010-10-26 Thread August Goers
t.com *From:* re-wrenches-boun...@lists.re-wrenches.org [mailto: re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *Allan Sindelar *Sent:* Monday, October 25, 2010 11:12 PM *To:* RE-wrenches *Subject:* [RE-wrenches] Code reference needed Wrenches, what's the actual Code reference locati

[RE-wrenches] Code reference needed

2010-10-25 Thread Allan Sindelar
Wrenches, what's the actual Code reference location for the requirement that service equipment be within 6" of the same plane? I couldn't find where I expected it in Art. 110. Thanks, Allan -- Allan Sindelar Allan@positiveenergysolar.co