Way to complicated. The “half wave load” is as described earlier. It is a
cheap way to get a hair drier (or other heater) with a three-way switch to have
air, half power and full power. The half power routes the hot side through a
diode so that the heating element only get half power. Full p
I’m curious what the PW 3 surge rating is?
Anyone know?
And where would it be found, I can’t find it.
jay
> On Dec 21, 2024, at 4:03 PM, Dave Angelini Offgrid Solar via RE-wrenches
> wrote:
>
>
>
> No warranty is no warranty. Would love it if Elon would go offgrid.
>
> The model 3 is almo
No warranty is no warranty. Would love it if Elon would go offgrid.
The model 3 is almost there. I did build an xw into a powerwall with bad
electronics. It is still running.
Dave Angelini Offgrid Solar
"we go where powerlines don't"
[1]https://offgridsolar1.com/ [2] [1]
e-mail offgridso.
Nomenclature! After all of this discussion it sounds like “half wave load” is
being used to describe a load that is only using one of the two 120 volt legs a
standard 120/240 split phase inverter provides. That being the case the AC
output current rating should be looked at. For example an inver
David, Wrenches,
I would not recommend that as it may be a warranty issue down the road and
last l heard is it must be monitored at all times and if there is not a
grid even though it's AC coupled could ba there issue.
Fun times
On Sat, Dec 21, 2024, 9:05 AM David Coale via RE-wrenches <
re-wrenc
Hi Wrenchers,
Has anyone used a PowerWall 3 as an ad-on to an existing off-grid system?
Tesla says they do not support off-grid, but if the existing off-grid system is
the “grid”, then this should work.
David
___
List sponsored by Redwood Alliance
I can’t remember if I sent the update.
We identified the load as a Japanese bidet. Once unplugged everything is
working normally.
So whatever people want to call the 1/2 wave. It’s what multiple OEMS call it.
If I can find an oscilloscope I’ll send along what the wave form looks like.
Jay
7 matches
Mail list logo
