The easy thing to do next time is to configure the gen start setting for
15 seconds. You have the 15 minute and 2 hours but from what this sounds
like, you need to set the 15 second to around 24V.
Then, you can add the
combox or the new gateway and troubleshoot. The "picture" from the battery
s
Good point Maverick,
You really need a router anyway to config the Combox. I carry one in the
truck but a good idea to leave it on site.
On Wed, Nov 20, 2019 at 7:33 AM Maverick Brown
wrote:
> The COMBOX is a great addition. It has a detailed seven day black box
> style recording of all the pa
The COMBOX is a great addition. It has a detailed seven day black box style
recording of all the parameters, even if it not connected to the internet You
can zoom in and see the battery voltage and current through the inverter. And
you can read errors and warnings for each Schneider device. Plu
If you enable SD card logging on the Combox, it should be helpful even
without internet access. You would just read the data on site with a
laptop with an SD card reader. Its definitely laborious though especially
with 5 second data. I'd test a 15 minute data set to be sure that you are
logging
This sw came on a prewired Epanel. The only monitering is through the scp
or the classic charge controller via whizbang Jr shunt. I am thinking
about adding the combox but not sure how helpful it will be since there is
no internet or cell service at this site.
Aaron Mandelkorn
President / Founder
Hi Aaron,
You may want to install a Combox and enable SD card logging. You can log 5
sec intervals I believe. Be sure to power it off of the Xanbus otherwise
it will turn off with the AC. If you decide this needs to be done, be
ready to sift through a lot of data.
Also, as I recall, the Schnei
6 matches
Mail list logo
