If the inverter were in search, I would think that there would be no AC
power produced by
the micro inverters at all because of anti-islanding.
boB
On 9/21/2015 4:40 PM, Jay wrote:
Nope wasn't in search when I had flicker.
If the loads were greater than the enphase production then no flick
Nope wasn't in search when I had flicker.
If the loads were greater than the enphase production then no flicker.
If it was "charging" then there was flicker.
My vfx 3524 is 8+ years old, but I don't think that would be a factor.
Jay.
Sent from my iPhone
> On Sep 21, 2015, at 12:46 PM, j
WrenchesCheck and confirm that the OB is not set in search, yhis will cause
issues like this.Jerry
Sent from my Verizon Wireless 4G LTE smartphone
Original message
From: jay
Date: 09/21/2015 6:58 AM (GMT-10:00)
To: RE-wrenches
Subject: [RE-wrenches] AC-coupling En
Hi Matt,
I can’t tell you the reason but I had the same problem on my Outback VFX.
I didn’t put it on a O scope, but sure looked like a 60 cycle flicker to me.
On my system of 2 enphase, when the loads exceeded the output of the enphase
the flicker when away.
But only 2 isn’t very real world.
I wired an Enphase string into my critical loads panel at my shop. I was
curious to see how it would work as I have customers with Enphase systems
that occasionally contact me about adding a battery backup system.
Why do the fluorescent lights and LEDs flicker once the grid power is
dropped. The
5 matches
Mail list logo
