Re: [RE-wrenches] APT Beaker

Hi all I believe in the early days of Anada power technologies they were all QOU with pull out fuse blocks ( class T). Back then it was 12 or 24v. 48v was really rare. And there were really big code fights over the QOU listing. Was it 48v actual or nominal? To John Wiles it was actual, most

Re: [RE-wrenches] APT Beaker

Possibly added after market, but I've seen quite a few APTs with QOUs used on the DC side. I don't recall the exact mounting configuration. In the days of DC loads, I would see the Heine's on the charge controller in, and then the QOUs used as PV inputs and DC load circuits. I never sold the APT

Re: [RE-wrenches] APT Beaker

Ray, If you have, it wasn't correct. The CFs are 1" wide, the QOUs are 3/4", and the mounting holes are 1" apart. Are you sure? The CFs have a 125 VDC rating. Allan

[RE-wrenches] QOU

Ray: QOU breakers are manufacturer rated for 125 VDC, UL rated for 45 VDC. Wm ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/