Two relevant details of note here:
1. The breaker on only the 5548 model was of a "toggle switch"
configuration, rather than the push button used on the rest of the
models. If you have a push button as you describe, the problem may
be that it was an incorrect prev
Try Mouser electronics. Otherwise, I'd consider bypassing it, and have
a regular breaker (30 or 40 amp) on theout put.
The tripping was probably because the breaker was malfunctioning.
Usually the SWs will trip their on board computer to shutdown for over
current, and the breaker should never b
Hi Jerry-I just finished a 20kW installation with 81 of these LG300s with Enphase inverters. These are the best performing 60-cell modules I could find besides SunPower.They're a bit pricey, but the customer thought they're worth it. I first tried to sell him a China brand; but this has the cachet
I have not used it but I have selected the LG305 watt for snow load,
efficiency, and price for my new home in Idaho. A 39” x 65” & 60 cell 305 watt
module is sweet. It gives me chills to think about it. Especially going back to
the day of Arco Bronze, gold & muds….
--
I have used the LG product line for 3/4 years now. Quality product , SLIPPERY
and can be easily scratched but they are a bit lighter then most, alignment
markings on the module. I get them from the QUALITY team at FOCUSED ENERGY,
these folks have been my supplier since Windy Dankoff 505-216-
Hi all- I'm having some difficulty finding a replacement for the little push-button circuit breaker on an old Trace SW5548 inverter. This is located on the lower left corner of the box, below the wiring access panel. The customer has had repeated tripping of this breaker from overcurrent, so it ha
Daryl- I do have a functional 4024 available. Please contact me off-list.
Kirk Herander
VSE
> On Jan 19, 2015, at 2:50 PM, Dan Tittmann wrote:
>
> unfortunately these great inverters after years and years of service are
> dropping like flies. Often the chargers go first then We have be
>
I just had a company safety person tell me that harnesses per OSHA are to be
replaced every five years regardless of condition. Is this correct? What about
lanyards, ropes, etc?
Kirk Herander
VT Solar, LLC
Proven PV provider since 1991
www.vermontsolarnow.com
dba Vermont Solar Engineerin
Hello to all.
Has anyone used or knows anything about the LG modules I am looking at the
Neon 300 for a customer, its a 60 cell 300 watt module but I/we don't use
the LG product so I am looking to the list
Jerry
___
List sponsored by Redwood Alliance
Lis
We also like the SunEarth panels. Please make sure you put the Rheem tanks
under an 80psi pressure test for 3 days and that it holds like a ROCK. We
prefer these tanks but have also found their heat exchangers to leak from time
to time.
Smiles, Andrew KoyaanisqatsiPresidentSolar Energy Soluti
I would offer the Sala "Exofit" NEX style harness part # 1113040 we use this
style with the front & spring loaded rear (stays easily accessible) d rings
weight is ~4.2 Lbs. Light weight easily adjusted and I believe they now offer
this style with out the shoulder pad protection. We also use a r
11 matches
Mail list logo
