Not sure what this is worth, but with most Kyocera modules that used the
same size cells (but different amount of cells per module) you could wire
many different VOC modules in series as long as the total number of CELLS
per string was the same. It wouldnt matter what the individual module
ratings
VMP not VOC
todd
On Thursday, October 24, 2013 1:26pm, "jay peltz" said:
> Hi Jeffe,
>
> I don't know the specs on those Kyocera, but if they are the same VOC then
> they
> are fine together.
>
> As to a enclosure for the CC's, I'd look at Midnight.
> They have about a million diffe
Hi Jesse;
Midnite's breaker boxes would solve your disconnect issue, but I
wouldn't use the baby box or Quad box, they're small and tight. I'd
actually consider their 6 position combiner box, even though its outdoor
rated. Another option would be the Mini DC box.
Here's my quick, real man's
http://www.millersolar.com/MillerSolar/practices/Technical_Procedures/SW_Upg
rade/_SW_Upgrade.html
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jesse Dahl
Sent: Thursday, October 24, 2013 1:14 PM
To: RE-wrenches
Subject: [RE-wre
Jay ,
The modules have different electrical specs...
I'd like to use the midnight because the new array in series is at 148V. We see
-40F. He already has the Outback 60 on site. That's why with 2 existing
outback products I figure the Flexware route would work best.
Thanks!
Jesse
Sent f
Weld 'em in a steel frame. Even then, a battery operated cutoff tool will have
the frames open in minutes. Height will really slow them down but make sure
they can't back up a vehicle and pull the array down…...Yes, I have had that
happen.
Larry
On Oct 24, 2013, at 1:37 PM, William Dorse
We've got a system to go up in the student ghetto in the middle of town, so
of course we got drunks and little pirates. Height has always been a
solution but requires a lot beefier (pronounced "expensive") support pipes.
What security measures does everyone recommend of a system that is low
enough
Hi Jeffe,
I don't know the specs on those Kyocera, but if they are the same VOC then they
are fine together.
As to a enclosure for the CC's, I'd look at Midnight.
They have about a million different boxes, you'll find one that will do the job
for you I'm sure.
Depending on the area, you might
Hello,
Looked at a system today that consisted of the following:
15 - Kyocera 158W modules
3 - Kyocera 185W modules
1 - Outback MX60
8 - New Trojan L16RE (48V system)
1 - Xantrex SW Plus
6 months ago he swapped out his old charge controller to the new MX60 and
purchased the new batteries
Hi Jay,
You might give the folks at Vision Meters a call;
email: ka...@visionmetering.com
phone: 803-628-0035
web: http://www.visionmetering.com
Chris Worcester
Solar Wind Works
NABCEP Certified PV Installer
Office 530-582-4503
Cell 530-448-9692
Fax 530-582-4603
www.solarwindworks.com
ch...@sola
10 matches
Mail list logo
