William,
Urine is conductive, and apparently has formed some unwanted electrical
pathways between components. This conductivity could easily continue after the
board has "dried" due to humidity in the air.
If the need is dire, you can try the following:
You will need two 9" x 12" ceramic ("Py
William,
I don't have a definitive answer, but I doubt it's either display
or chipset; more likely in the boards. The chips are EEPROMs that
contain programming for the firmware; unless there's a bad socket
connection from the pee, they won't be affected. The disp
Hi William,
Fluid intrusion can be very problematic and lead to highly erratic
behavior, if not a complete shutdown.
If an IC was internally damaged by moisture allowing for an undesirable
current path, then a chipset may
solve the issue. It may be a challenge to clean sufficiently unless you
r
Friends:
I had a mouse take up residency in an SW inverter (SW4024). It peed on the
top circuit board and chewed on one wire, at least that we found. We have
had this happen before and solved the problem by cleaning and drying.
This time the mouse pee was minimal and cleaned off easily and
If anyone has a single ESA210 evergreen module, please contact me off list
Thanks,
Jeremy
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.net
Email allso...@live.com_
Hi all!
Can I please get your recommendations for a turbine upgrade.
Currently there is a 1.5" tower we can utilize. There was a Lakota on site but
I have it on the bench and will not recommend fixing it or replacing it with
the like.
So, 3 phase wiring is in place.
P.S. I don't think the
6 matches
Mail list logo
