Jesse,
The controller is supposed to limit the output current to 80 amps. But
the 80-amp GFDI breakers will trip anyway.
Kent Osterberg
Blue Mountain Solar, Inc.
www.bluemountainsolar.com
On 5/28/2013 9:01 PM, Jesse Dahl wrote:
When I was looking at the Outback Flexone setup today during som
When I was looking at the Outback Flexone setup today during some down time I
notice that they send that package out with an 80A PV breaker and an 80A GFDI
breaker. If a person had an array up at 2500W and a 24V battery bank, on some
occasions, wouldn't this lead to tripping of the 80A breaker
Marco,
Are these recent issues. I was told of this problem by our distributor,
who says this is now resolved.
On Tue, May 28, 2013 at 7:45 PM, Marco Mangelsdorf wrote:
> Challenges with the monitoring system.
>
> ** **
>
> *From:* re-wrenches-boun...@lists.re-wrenches.org [mailto:
> re-wre
Hi Jim,
I have done exactly this before (old, but not dead car batteries) with the XW
and no problems at all. In fact, due to the XW's flawed charging algorithms my
default config is to set the batteries to the lowest possible Ah setting.
I've not tried with Outback but can't see how it wou
Challenges with the monitoring system.
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Carl Adams
Sent: Tuesday, May 28, 2013 9:11 AM
To: RE-wrenches
Subject: [RE-wrenches] Solar Bridge AC Modules
Hello Wrenches,
SolarBridg
Lars,
With the old Trace inverters? Were they 4.01 firmware or
4.10/4.30? Did you use the GTI? How did you AC couple them - which
input/output terminals?
And what was the rationale in an off grid scenario - distance to
sun in a shady forest?
I didn't
Hi wrenches
I have a "friend of a friend" that wants a 6kW grid tie with battery backup
system, but does not have the money to buy everything at the moment.
Right now, he can afford the PV + inverter + BoS, but estimates that he's need
to put aside $$ for about a year before he can afford a prop
Hi Lars
I'm curious what you found those efficiency differences to be?
And how are you measuring inverter charging efficiency in the bi directional
mode
Thanks
Jay
Peltz power
Sent from my iPhone
On May 28, 2013, at 10:53 AM, "lars Ortegren" wrote:
> We have done a number of off grid AC
Hello Wrenches,
SolarBridge is paired up with four companies ( ET Solar, Mage Solar,
Talesun, and Solartec ) manufacturing AC modules. Have any of you
installed any of these yet and if so what was your impression.
With Regards
Carl Adams
SunRock Solar
Wrenches,
The issue of the 3-500 watt electric glow bar in gas ovens is well
known. I recently installed a Peerless-Premier stove in my off grid
kitchen, selecting a model built
specifically for off grid homes, with an electric igniter
for a pilot ligh
We have done a number of off grid AC coupling projects over the last eight
years. We have found they are successful with anything that comes close to a
true sign wave, including some of the old Trace inverters. I would be
careful to not come too close to the wattage of the source inverter, and
keep
Jesse,
I have an FM80 on an array of 2560 STC; all off-grid. The only issue I have
is that when my batteries are full, and I have essentially zero loads, and
the sun is shining away, my XW will disconnect and my house will lose power.
I have to reset the system to get back online. This, I'm pr
12 matches
Mail list logo
