Fitz is ridiculous. That's my dream custom which I keep talking myself out of
because the need-to-dollar ratio - I already have great bikes - never lines up
in my brain. But want!!!
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubs
What a beautiful bike!
On Saturday, 13 April 2019 16:51:36 UTC-7, Rick Thompson wrote:
>
> Same type setup (on a Fitz). It has (top) tube shifters and centerpull
> brakes. I frequently swap between drop bars and flat bars, which takes
> about 5 minutes.
>
>
> https://www.flickr.com/photos/ric
Another approach if you use MTB brakes and shifters (i.e. 22.2mm bar
diameter) and want to switch between a flat/cruiser type bar and drop bars
is to use the Soma Fab Gator Drop Bar. Depending on the other handlebar
used there will likely be more cable/housing in one application than needed
wh
Same type setup (on a Fitz). It has (top) tube shifters and centerpull
brakes. I frequently swap between drop bars and flat bars, which takes
about 5 minutes.
https://www.flickr.com/photos/ricks_boats/40088504054/in/album-72157683793039854/
On Wednesday, April 10, 2019 at 8:34:02 AM UTC-7, Be
😂😂😂
That's compelling setup to try. Luckily, my Boscos take me 80% there in
terms of riding positions offered.
On Wednesday, 10 April 2019 11:38:39 UTC-7, jack loudon wrote:
>
> [image: thorn]
> I'm sure many of you have seen this from Sheldon Brown...
>
>
> On Wednesday, April 10, 2019 at 6:
Read the entire thread.
On Wed, Apr 10, 2019 at 12:36 PM 'jeffrey kane' via RBW Owners Bunch <
rbw-owners-bunch@googlegroups.com> wrote:
> Patrick -- ha! I like your thinking ... but the OP was asking about
> cockpit swaps (!)
>
> On Wednesday, April 10, 2019 at 2:17:18 PM UTC-4, Patrick Moore wr
[image: thorn]
I'm sure many of you have seen this from Sheldon Brown...
On Wednesday, April 10, 2019 at 6:43:55 AM UTC-7, esoterica etc wrote:
>
>
> Howdy all,
>
> I’m looking into possible ways on how to construct a “quick release”
> method for easy swapping of cockpits. My Atlantis currently
Patrick -- ha! I like your thinking ... but the OP was asking about cockpit
swaps (!)
On Wednesday, April 10, 2019 at 2:17:18 PM UTC-4, Patrick Moore wrote:
>
> Let me elucidate. You can buy a very reliable used car for $10K. The
> average new car cost in 2018 was $35K, per a quick Google (vi).
Let me elucidate. You can buy a very reliable used car for $10K. The
average new car cost in 2018 was $35K, per a quick Google (vi). If you
shell out for 3 new Rivs at $4K/each -- you get the picture. And $4K is
pretty generous.
Where do all the deep pockets come from? That's 1 answer.
On Wed, A
The deep pockets come from driving old cars no more miles than necessary.
With 3 bikes (+ folder/beater) I drive -- what, 1K miles/year?. Even paying
for gas and insurance (!) and repairs on an old car that I basically let my
17 year old daughter use, I have plenty $ left over for bike stuff.
Even
An Atlantis is a perfect candidate for a drop/upright easy switch-out and
provided yours has DT shifter bosses (and you're OK using down tube
shifters) then Shoji and Benz have it right. Seriously folks -- buy another
bike (?) where did all the deep pockets come from???
On Wednesday, April 10,
On Wednesday, April 10, 2019 at 7:47:54 AM UTC-7, Shoji Takahashi wrote:
>
>
> On my Hunqapillar, it was easy to unclip the canti-straddle cable. Set the
> brake cable lengths on multiple cockpits to-be at the same straddle
> heights, and there's little adjustment necessary.
>
> Easiest would be
I frequently switch among 3-4 kinds of alt-bars I have. Sometimes I swap
the stem as well. It takes me 5 mins give or take to swap the handlebar.
If I have to switch the stem as well, add another 2 mins. I have Ergon
grips, which are very easy to remove. The process just involves loosening
Hi Mark,
I and others have done quick-change cockpits.
On my Hunqapillar, it was easy to unclip the canti-straddle cable. Set the
brake cable lengths on multiple cockpits to-be at the same straddle
heights, and there's little adjustment necessary.
Easiest would be to set up down-tube shifters.
14 matches
Mail list logo
