https://docs.google.com/document/d/1CN_npiNL-fVelnLUtBqmgTLOH5GEiaA8R7t5d9H-maU/edit
On Tuesday, May 16, 2023 at 8:28:12 AM UTC-7 Max S wrote:
> Question for those who might know...
> I've got a Phil hubbed wheelset, the rear uses what I believe is a Rivy
> hub, freewheel version. I could be mi
Yeah, talk to Dustin in the Phil Wood service department. He’s super helpful. I think the general rule is that if the hub is more than about 12 or 15 years old, you’d have to send it in for service because the older designs are not user serviceable. If it’s less, you might be able to service it you
This was three months ago.
Laing
On Tuesday, May 16, 2023 at 1:44:02 PM UTC-4 lconley wrote:
> Call them up or email them. They had the parts to turn the the ancient 48H
> 107 OLD(?) SF hub in the picture into a 135 OLD and new bearings for it,
> but I had to send it in. I did the 130 to 135 O
Call them up or email them. They had the parts to turn the the ancient 48H
107 OLD(?) SF hub in the picture into a 135 OLD and new bearings for it,
but I had to send it in. I did the 130 to 135 OLD Touring hub myself.
Laing
On Tuesday, May 16, 2023 at 1:07:25 PM UTC-4 Garth wrote:
> Seeing tha
Seeing that the Rivvy hub was of the last iteration of their freewheel hubs
you ought to be able to do it yourself. Both of my touring rear hubs, from
'99 and 2011 have the field serviceable axle(FSA), that's easy to
dismantle.
Whether or not they have the parts, that's another story. They oug
Note also that you can change the freewheel side as well. Both of the hubs
in the picture are 7 speed. You can get 5 thru 8 as I recall. I think 5
speed is what you use for a single speed setup.
Laing
On Tuesday, May 16, 2023 at 11:45:01 AM UTC-4 lconley wrote:
> The touring hubs used all the
I did this on an older Phil FW hub. You can buy a shorter axle end piece
on the FW side, but there are differences over the years, so you should
contact Phil directly and get the one that fits that model. Then you'll
have to re-dish the wheel.
Greg
On Tuesday, May 16, 2023 at 8:28:12 AM UTC-
