[RBW] Re: Bike Culture - Where you Live

Here in Kalamazoo Mi there is a very active bike culture. The local authorities are self consciously developing a large network of bike infrastructure. There is a bike club which is primarily a popular group of spandex hamsters, but the practical use is growing largely from e-bike sales. The

[RBW] Re: Ride Report: Erie Canalway Trail

That's a great ride. I did it a few years ago. I was camping and the free campsites available all along the way were a real convenience. Don't worry about your saddle, all the Brooks saddles I've had over the past 50 years have been soaking wet at one time or another. They all survived. Mar

[RBW] Re: Leather Saddles - What do you Wear

I went back to Brooks leather and also VO leather saddles over 25 years ago after trying "the latest greatest" whatever. I quit wearing cycling shorts at the same time. I did find over the years that merino wool underwear is more comfortable than cotton, but I'm still too young for diapers. M

[RBW] Re: Bicycle trailers

I've been using a Burley Travoy

[RBW] Re: NYC 5 Boro Ride May 4, 2025

I'm planning on it this year. Marc On Thursday, December 12, 2024 at 2:18:58 PM UTC-5 Dick Pahle wrote: > Michael: > > I'll be riding my 2015 Waterford built Homer. You are right. Great way to > see the city. 45 years ago I ran the NYC Marathon. This will be kinda a > book end thing for this

[RBW] Re: Erie Canal Trail on a Rivendell

Here's my blogpost from the trip took a few years ago on my Hunq. Any Riv will be fine on this trip depending on what you intend to carry. http://simplecycle-marc.blogspot.com/2018/06/a-glorious-week-on-erie-canal-trail.html Marc On Monday, September 30, 2024 at 12:01:20 PM UTC-4 jeff.ze...

[RBW] Re: Basket on front or in back?

On the rear for a mixte because the extra stays stabilize the weight when it's loaded and you don't have to raise your leg over it. The front for diamond frame. Marc On Monday, August 19, 2024 at 8:29:31 AM UTC-4 Bicycle Belle Ding Ding! wrote: > Tough call. I have a bike with each. Whatever

[RBW] Re: SE Michigan Riv Ride and Campout

in at 3:00pm/ Check out > by 11:00am Sunday morning. > > On Thursday, August 1, 2024 at 1:29:17 PM UTC-4 Marc Irwin wrote: > >> If I get the schedule, we are driving to the park and camping on the >> night of the 18th, then riding on the 19th and returning home. If that

[RBW] Re: SE Michigan Riv Ride and Campout

If I get the schedule, we are driving to the park and camping on the night of the 18th, then riding on the 19th and returning home. If that's right, I'll plan to be there. Marc On Thursday, August 1, 2024 at 9:08:00 AM UTC-4 Jeffrey Marco wrote: > Hey Y'all, > I'll be hosting a Riv ride and

Re: [RBW] Re: RAGBRAI?

icycle Belle Ding Ding! > wrote: > >> Marc! You want to do this with me, I’m sure! >> The Lone Wolf and The Platypus Rider Ride Across Two States. I can see it >> now. >> Sent from my iPhone >> >> On Jan 26, 2024, at 11:29 AM, Marc Irwin wrote: >>

Re: [RBW] Re: RAGBRAI?

6, 2024 at 10:42:00 AM UTC-6 Bicycle Belle Ding Ding! > wrote: > >> Marc! You want to do this with me, I’m sure! >> The Lone Wolf and The Platypus Rider Ride Across Two States. I can see it >> now. >> Sent from my iPhone >> >> On Jan 26, 2024, at 11:29 AM, M

Re: [RBW] Re: RAGBRAI?

Leah, The ride from Millenium Park sounds like the route I've taken several times to and from Chicago, using Indiana Dunes as one of the overnights. It would be a good ride, you could take Amtrak to Chicago and return on Amtrak from New Buffalo. Marc On Thursday, January 25, 2024 at 9:2

[RBW] Re: New Jewelry for my Platypus

If Paul did the anodizing, this time it will be right! Marc On Thursday, January 11, 2024 at 8:28:30 PM UTC-5 Bicycle Belle Ding Ding! wrote: > I have never had Paul anything. I’ve had whatever brakes and levers came > with my bikes and didn’t think any more about it. I did get my VO brake >

[RBW] Re: "Grant hates toe clips."

I used clipess for years and thought they were the greatest thing ever until one broke. I immediately switched back to the old platforms with toeclips "temporarily." All I noticed when I changed back was that the shoes were more comfortable. I don't think the clipless did anything for me. I

[RBW] Re: Ceramic coating the paint

I've used KBS Coating Diamond Finish with some success. It has worked well over the paint on my Sam, but not so well on the raw steel of my Hunq. Here's the experience with the Hunq :https://simplecycle-marc.blogspot.com/2021/09/mammoth-cosmetics.html Marc On Wednesday, October 25, 2023 at

[RBW] Re: Who’s getting a Platypus tomorrow?

Thanks to you I don't need to. Marc[image: 20231004_121716.jpg][image: 20231004_133008.jpg] On Wednesday, October 18, 2023 at 9:40:42 PM UTC-4 Bicycle Belle Ding Ding! wrote: > The preorder email was sent out today! Did you read it? Lots of completes > for sale but only 24 frames. > > Set to

[RBW] Re: New Platypus Lug

Cost was probably involved. The fillet brazing on the original Platypus would be very time consuming and more difficult in a factory setting than connecting a few tubes with lug. Marc On Saturday, October 7, 2023 at 5:50:25 PM UTC-4 allan@gmail.com wrote: > [image: 0F3B224F-E805-48D6-9A22

[RBW] Re: Best mitten design for very cold weather

I've used hunter's mittens for years. They have a lot of practical advantages : http://simplecycle-marc.blogspot.com/2013/02/toasty-hands.html Marc On Thursday, September 28, 2023 at 4:15:59 PM UTC-4 Patrick Moore wrote: > The fall style thread raises a question about keeping your hands warm i

Re: [RBW] Upcoming Riv Ride: Chicago

We don't plan to go as far as McCormick Place. We're open to suggestions for lunch, I picked Navy Pier as a convenient turnaround point for a 35 mile ride from Mack's. Marc On Wednesday, August 2, 2023 at 8:37:55 AM UTC-4 captaincon...@gmail.com wrote: > I'm sort of in. There are sections

[RBW] Re: Upcoming Riv Ride: Chicago

then catch the trail from there. We will have lunch at the Navy >>> Pier (restaurant also TBD, locals feel free to weigh in) and ride for maybe >>> a total of 30-40 miles. >>> >>> Bring your favorite Rivendell, some mad money to spend at Mack’s if you &g

[RBW] Re: Let’s say I made my Clem into a “gravel bike”

If you want a larger footprint on that bike for gravel, I'd recommend Schwalbe Big Ben tires and add Flat Attack sealant to the tubes. Don't over think it. Marc On Saturday, June 3, 2023 at 4:15:22 PM UTC-4 Bicycle Belle Ding Ding! wrote: > I love pavement. But I’ve been on two gravel rides

Re: [RBW] Please Join us: Riv Ride, Yankee Springs in Hastings, Michigan

b where we will convene after, for food and drinks. >> https://www.walldorffbrewpub.com/story >> >> The road is gravel, so consider that when choosing what tires you’re >> running. If we get rained out, the ride will be rescheduled for May 27th, >> same time. This ride is no

[RBW] Re: Lighter than your Platypus

[image: Heavier Hunq.JPG] Misguided weight weenies, all of you. You want a better workout? Get a heavier bike. Marc On Thursday, April 27, 2023 at 6:58:18 AM UTC-4 Roberta wrote: > Mine feels light when riding it. > > Roberta > Philadelphia > > On Tuesday, April 25, 2023 at 8:05:57 PM UTC-4

[RBW] Re: What do I replace coroplast with in Sackville

If you can't find an abandoned yard sign lying around, the big box hardware stores sell new pieces at pretty cheap prices. Marc On Monday, April 17, 2023 at 11:06:34 PM UTC-4 Joe Bernard wrote: > Mine is all bendy and collapsey in my medium SaddleSack. What are you > folks putting in there to

Re: [RBW] Please Join us: Riv Ride, Yankee Springs in Hastings, Michigan

e rescheduled for May 27th, > same time. This ride is not affiliated with Rivendell Bicycle Works; it is > a meeting of like-minded riders who will probably ride Rivs. Ride at your > own risk. > > We are so excited to see you there! > Leah Peterson and Marc Irwin > > --

Re: [RBW] Getting my groove back on with the Platypus - dealing with near misses

You definitely don't want to be intimidated from taking the lane. It prevents a lot of terrible decisions that motorists make. I ride around in city traffic daily and the most dangerous thing I see EVERY DAY is drivers yielding when they shouldn't. They will suddenly stop a line of traffic

[RBW] Re: Bombadil and Hunqapillar origins: The definitive thread

This thread has been informative and interesting. I don't know how definitive my experience is but here is what I thought when I made the decision 12 years ago: http://simplecycle-marc.blogspot.com/2010/12/elves-of-rivendell-are-delivering-for.html On Sunday, December 18, 2022 at 5:00:47 PM UT

[RBW] Re: The do-it-all Rivendell of choice

Hunq for me. Here in Michigan we have every kind of road, temperature and precipitation, if I had to have only one bike, the Hunq can handle it. Marc On Wednesday, November 16, 2022 at 4:35:25 PM UTC-5 Patrick Moore wrote: > The threads on Platypus versus [name] and using versus "saving" yo

[RBW] Re: When the Rivs are sold out and you need a bike for daily commuting...

Back a few years, I mistimed my chance at a Wilbury and ended up with a Soma Buena Vista . It was a great city bike for years before it was stolen. So, I bought another, built it a little racier and love it even more. .[image: B

Re: [RBW] Using Your Rivendell Vs. Being Precious: A Spectrum

I've often wondered how frustrating it is for Grant. So many of his bikes end up as garage ornaments. I've tried to explain to interested people that the fancy lugs and paint get our attention, but the geometry, ride and handling are what keep us on the bikes. My '87 Trek has nice lugs and

Re: [RBW] Re: Kickstand plates, what's up with that?

I did break the kickstand plate on my Hunq the first year I had it. I'm not sure what exactly caused it, but I was using a Pletscher two legged kickstand on several overnight and week long tours. The bike was heavily loaded and I had never trimmed the length of the kickstand legs. I suspect

Re: [RBW] High bars at a club ride

the garage. > > > On Tuesday, July 26, 2022, Marc Irwin wrote: > >> It was a normal Monday night ride with the Kalamazoo Bicycle Club. A >> typical group was riding 15-16 MPH for 25 or so miles. A good bunch of >> people in biking regalia on their over the counte

[RBW] High bars at a club ride

It was a normal Monday night ride with the Kalamazoo Bicycle Club. A typical group was riding 15-16 MPH for 25 or so miles. A good bunch of people in biking regalia on their over the counter crotch rockets with drop bars, except for me and Leah Peterson on our Rivendells. with upright bars.

Re: [RBW] Southwest Michigan Rivendell Ride ✅

She rides with a special drivetrain. It's a single speed with 18 options. Marc On Monday, July 18, 2022 at 12:16:47 PM UTC-4 Bicycle Belle Ding Ding! wrote: > I mean, MY bike is a single speed, right Marc? 🤣 > > Sent from my iPhone > > On Jul 18, 2022, at 12:14 PM, Marc

Re: [RBW] Southwest Michigan Rivendell Ride ✅

Solidarity?!?! She doesn't shift. That's it. Marc On Sunday, July 17, 2022 at 2:32:41 PM UTC-4 Joe Bernard wrote: > Ok so if I'm following this correctly you stayed in one gear in > singlespeed solidarity with Ben for most of the ride..and he was shifting! > I love this story! 😁 > > On Sund

Re: [RBW] Southwest Michigan Rivendell Ride ✅

I can assure you Leah does not know the difference. Marc On Sunday, July 17, 2022 at 1:05:22 PM UTC-4 Wesley wrote: > I love all of this, and must admit being confused by Ben's custom being > called a single-speed. > -W > On Sunday, July 17, 2022 at 7:01:30 AM UTC-7 Max S wrote: > >> [image: Le

Re: [RBW] Re: Rivendell Ride in SW Michigan

ies are 38mm and >>> normal dirt road in sandy West Michigan are 48mm. >>> Make it a great day, >>> Tom >>> >>> On Tuesday, June 21, 2022 at 10:03:36 AM UTC-4 Marc Irwin wrote: >>> >>>> Don't forget we are in the eastern time zone.

Re: [RBW] Re: Club Rides On A Racing Platypus

Joe Bernard wrote: > > "Beautiful Godzilla" and "strident spandex hamsters"..I'm clearly behind > on the latest cycling terminology! 😂 > > > > On Wednesday, June 29, 2022 at 7:31:07 AM UTC-7 Marc Irwin wrote: > >> It was just a few months ago Lea

Re: [RBW] Re: Club Rides On A Racing Platypus

It was just a few months ago Leah and her family moved to Kalamazoo from Las Vegas, several people suggested she contact me about riding in the area. She was a self described "Beautiful Godzilla" (Bike Snob p. 75) who had never ridden more than 17 miles and never with anybody else. I introdu

Re: [RBW] Re: Rivendell Ride in SW Michigan

, I could be in for driving out. >> >> >> - Mike >> On Sunday, June 19, 2022 at 6:55:57 PM UTC-5 rmro...@gmail.com wrote: >> >>> I might be up for that! >>> >>> Sent from my iPhone >>> >>> On Jun 19, 2022, at 7:36 PM, Conway Benne

[RBW] Re: How do you track mileage?

Why bother? I ride my bike, enjoy the ride, that's it. Marc On Tuesday, March 1, 2022 at 4:13:11 PM UTC-5 jmlmu...@gmail.com wrote: > How is everyone keeping track of mileage on your bikes? I’m curious what > methods people are using. > > I’ve occasionally tracked with a GPS watch only to nev

[RBW] Re: A Hunq

ay, December 8, 2021 at 9:30:01 AM UTC-5 Marc Irwin wrote: > >> [image: IMG_0774.JPG] >> That is the lug work and paint from the Waterford production run. >> >> Marc >> >> On Monday, December 6, 2021 at 7:03:29 PM UTC-5 Nikko in Oakland wrote: >> >

[RBW] Re: A Hunq

, December 8, 2021 at 9:30:01 AM UTC-5 Marc Irwin wrote: > >> [image: IMG_0774.JPG] >> That is the lug work and paint from the Waterford production run. >> >> Marc >> >> On Monday, December 6, 2021 at 7:03:29 PM UTC-5 Nikko in Oakland wrote: >> >

[RBW] Re: A Hunq

at > the time I needed a good road bike more than I needed the Hunq. > > On Wednesday, December 8, 2021 at 9:30:01 AM UTC-5 Marc Irwin wrote: > >> [image: IMG_0774.JPG] >> That is the lug work and paint from the Waterford production run. >> >> Marc >> &

[RBW] Re: A Hunq

Not that it really matters, but that is a Taiwan frame, the Waterford built have different lugs on the head tube as well as a different paint job. Waterford only did one initial production run, so, unless that is a custom order, it was built in Taiwan. Marc On Monday, December 6, 2021 at 7:56:2

[RBW] Re: Pick your brains about spoke count?

I'm 210 on a good day (if I lie). I had Velocity build wheels for each of my Riv's and use 32 spokes on my Hillborne with 35mm tires while my Hunq has 36 front and 40 rear with 45mm because it's used for loaded touring. Marc On Monday, October 25, 2021 at 8:39:44 AM UTC-4 bjmi...@gmail.com w

[RBW] Re: Kickstand Recommendations

I've been really happy with my Pletscher Zoom. It is a one legged stand so it won't interfere with the tire size. Marc On Monday, August 30, 2021 at 8:25:22 AM UTC-4 Bones wrote: > Here is my predicament: I used the Pletscher double kickstand on my old > Appaloosa. It (barely) cleared the 50m

[RBW] Re: question re Brooks leather bar tape

I felt the same way when I bought Brooks tape. I even felt silly buying it on a markdown. But it lasts and lasts and still looks and feels great 15 years later. Marc On Saturday, March 6, 2021 at 9:30:11 PM UTC-5 Jim S. wrote: > So I splurged and bought this fancy, pricey bar tape. I'm emba

[RBW] Re: New Bike day- Red Mixte but not a Raspberry Platypus.

I find the Buena Vista very firm. The previous version I built had a VO front rack and rear with Wald folding baskets. I could carry $200 in groceries and the frame was still very firm. The front rack did wobble a little under heavy load. Marc On Friday, March 5, 2021 at 3:16:25 AM UTC-5 Li

[RBW] Re: New Bike day- Red Mixte but not a Raspberry Platypus.

kids in town. > Leah > > On Wednesday, March 3, 2021 at 5:52:53 AM UTC-8 Marc Irwin wrote: > >> No, Tom I didn't name this one. I had a little too much fun building the >> first one. >> >> Marc >> >> On Tuesday, March 2, 2021 at 5:58:35 PM UTC-5

[RBW] Re: New Bike day- Red Mixte but not a Raspberry Platypus.

? > Tom > > On Tuesday, March 2, 2021 at 10:27:24 AM UTC-5 Marc Irwin wrote: > >> >> Nice looking build, I got one last year and built it very light for brisk >> city riding and commuting. I love it. The red is real, damn red. >> >> Marc[image: 20200104_150

[RBW] Re: The joy of winter riding, and how do you keep your toes warm?

Commuting in Michigan I have learned to use Grabber Toe warmers. I place them on top of my wool socks on the top of my feet under my Chrome boots. They last for hours, so, after a shorter ride, place them in a zip lock bag, squeeze the air out and seal them up. They will still be working the

[RBW] Re: Studded Tire Experience, help

Here in Michigan I have been using 50mm Marathons, but my riding is a combination of streets and paved trails. The trails are usually packed rutted and icy and generally fun to ride for a change of pace. I suppose a more aggressive tread would be needed for snowy gravel. Marc On Thursday, J

Re: [RBW] Reverse Levers with Linear-Pull Brakes?

If those are long pull (for standard caliper brakes) they won't work without a travel agent added to the V-brake. I use regular MTB levers with interrupter levers on my Hunq and had to add the travel agent when I went to V brakes. The travel agent is a PITA to set up, works fine, looks a litt

[RBW] Re: What? No bikes at RBW?

Bikes are selling out everywhere in the world. The local shop around the corner from me usually keeps about 300 in stock. They now have about 20 thanks to a fall shipment. It's a generally good thing I think. On Friday, November 13, 2020 at 8:26:54 PM UTC-5 Jim M. wrote: > Anyone else noti

[RBW] Re: daily post ur riv

Just taking the chance to show off my Sam, lookin' good with the new Happisack. Mar c [image: Happisack.jpg] Marc On Friday, February 1, 2019 at 2:29:13 PM UTC-5 Adam Leibow wrote: > hi all, i want to create a thread where you just post a picture of your > rivendell(s) whenever you feel lik

[RBW] Re: Do you leave it alone...or must you monkey?

It ain't brokeI gotta fix it! On Tuesday, September 15, 2020 at 8:50:51 AM UTC-4 bjmi...@gmail.com wrote: > As I wait for my first Rivendell (sort of) patiently, I can't help but > prowl their website and this group and stare at components and accessories > that I think I'd like to try. But

[RBW] Re: Was the Hunqapillar designed for Albatross bars?

The Bosco Bars came the year following the Hunq. I bought my Hunq, rode it for a year and ABSOLUTELY had to have a lighter version of the same geometry, so I ordered a Hillborne. The first Bosco shipment was coming at the same time as my Hillborne frame so I added those to the order. After r

[RBW] Re: Commuter Tire for Hunq

I did not enjoy Marathon's or Marathon Supreme's when I used them. The Marathon's were heavy, slow and I had quite a few flats. I think the Big Ben is the perfect tire for my Hunq to do anything I care to do, including commuting. Marc On Tuesday, June 9, 2020 at 10:06:52 PM UTC-4, Dave Gros

[RBW] Re: Favorite Rivendell model names?

Hunqapillar, but I am definitely biased : http://simplecycle-marc.blogspot.com/2010/12/elves-of-rivendell-are-delivering-for.html Marc On Wednesday, June 3, 2020 at 10:17:21 PM UTC-4, Philip Williamson wrote: > > Or, “Let’s Fight About Something On Topic!” > > Let’s hear your most and least fa

[RBW] Re: Locking Up your Riv

I use the Abus Bordo (the original 4lb ) for either Riv that I have. I also use the VO anti theft skewers on the wheels, they've saved at least one wheel from being stolen. Marc On Wednesday, May 27, 2020 at 12:04:50 PM UTC-4, Vincent Tamer wrote: > > So I notice the Abus Bordo came back in s

Re: [RBW] Re: Shorts similar to Riv MUSA

awesome bicycle clothing line. I’ve never used > them personally. > > > *Gustavo Vasquez* > *Natural Resource Crew Supervisor * > Conservation Corps North Bay > *Phone*: (707) 758-4129 > *Email*: gvasq...@ccnorthbay.org > > On May 24, 2020, at 07:00, Marc Irwin wrote: >

[RBW] Re: Shorts similar to Riv MUSA

I use plain old multi purpose athletic shorts now that my MUSA supply is dwindling. I have bought one pair of shorts from Chrome. They are really nice and I will probably buy more from them in the future. Marc On Saturday,

[RBW] Re: FS - Garage Sale : Nitto, White Industries, Rivendell, Shimano etc.

PM Sent on Wheelset #1 Marc On Tuesday, March 24, 2020 at 10:25:08 AM UTC-4, S. Greco wrote: > > Sorry for leaving out wheel sizes in the first post. They are: > > *700C* Wheelset No1 : Dyno Wheelset & Lighting (Phil Wood rear hub / > Nexus front hub) includes Conti Top Touring tires - $220 > *

[RBW] Re: FS - Garage Sale : Nitto, White Industries, Rivendell, Shimano etc.

Wheelset No. 1. What are the rims and tire size? On Monday, March 23, 2020 at 10:25:26 AM UTC-4, S. Greco wrote: > > Selling off a stash of nice, used, but certainly usable parts. > All prices *include* shipping CONUS. Open to reasonable offers, certainly > for anyone interested in multiple ite

[RBW] Re: Real width of Schwalbe Big Ben tires and the effect with fenders.

I use Big Ben's on my Hunq and I doubt you will have to change or re position the fenders. Depending on the fenders, you might have to adjust the stays. Marc On Thursday, March 19, 2020 at 8:52:35 PM UTC-4, Roberta wrote: > > Last week, I rode Leah's (Bicycle Belle Ding Ding) Clem L, which was

[RBW] Looking for a 700 x 50 commuting tire

Shwalbe Big Ben. I love them for commuting and touring. Marc -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.co

[RBW] Re: Thinking about cycling for me in the future....

I'm 67 and have been commuting, touring and club riding since I was 20. I think it has prevented my perception and reflexes from deteriorating as I've seen in others my age. I think the occasional close call is a healthy reminder to pay attention and ride safely. It will happen but I re

[RBW] Re: Advice Needed: Tires

Thanks to everybody for the feedback. Marc -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this disc

[RBW] Re: Advice Needed: Tires

The Gravel King seemed an option until I heard a number of complaints about flats, even on tubeless applications. What is your experience with Gravel Kings and flats? I've been using Pasela tires for years but have been thinking of tubeless for the Hillborne now. Marc On Wednesday, January

[RBW] Re: Advice Needed: Tires

I had a similar experience with Marathon's on my Hunqapillar. They were the slowest tires I have ever used, on any thing. I replaced them with larger (50mm) Schwalbe Big Ben and have been rolling happily ever since. The Big Ben is incredibly fast on pavement for a wide tire and the extra tre

[RBW] Re: Advice Needed: Tires

I'm thinking, after a friend recommended them, of going to Bon Jon Pass tires on my Hillborne. Is the extra light casing worth the cash? Do you give up much durability against the standard casing? I worry a bit about the casing because I'm bigger (205-210 on the best of days) and have seen

[RBW] Re: 2020 Goals

Keep using my bikes for transportation around town.I don't track bike mileage anymore but that routine has kept my driving in the 2-3K range for a year. Make 3 week long self supported trips and monthly weekend trips to the Lake. I should ride in a charity ride each month and perhaps a few

[RBW] Re: Silver2 shifters on downtube?

Just did a test ride with the new shifter. IT works great. Is the smoothest shifter I've used. I ordered one for the right side because it's a 1X setup. The shifting was very precise without ant drifting or need to tighten the bolt. I can see where one might prefer the longer lever but it's

[RBW] Re: Silver2 shifters on downtube?

I'll be trying it over the weekend. It's supposed to be delivered today. I'll let you know how it works out. Marc On Friday, December 6, 2019 at 8:08:52 PM UTC-5, Wyatt wrote: > > Has anyone mounted the Silver2 shifters on a downtube yet? Curious to see > how that looks and works. -- You r

[RBW] Re: Bicycle Lights for Commuting

I really like the BM Eyc for city riding. It works well with either a dynohub or sidewall dynamo. Marc On Tuesday, November 5, 2019 at 12:48:18 AM UTC-5, DHans wrote: > > With the time change I will be biking home in the dark. I’m curious about > your light setup for riding in the dark. Also f

[RBW] Re: Issues with slipping bosco bars?

It takes a substantial amount of torque to keep those bars stable. I was one of the first to try them years ago and they called a few weeks later to see if they were alright. I had to use a pipe as an extension on my allen wrench to get them tight enough. They have a freaky long reach back c

[RBW] Re: "yoko" salmon brakepads?

It might just be me but I like the feel of the Yoko pads better than Kool Stop. Kool Stop is easier to find but the Yoko pads are made with the original Matthauser formula which was bought and licensed by Scott. I've always liked Matthauser pads and just stick with them. I find the Yoko's on

[RBW] Re: Looking for a replacement for the old MUSA short sleeved merino wool jersey

No Rod, I've had good luck with cold water/ delicate cycle in the machine. I just throw them over the shower curtain rod for a few hours. I'm sure their suggestion is better, but I've only experienced a tiny bit of shrinkage in one of them. Marc -- You received this message because you are

[RBW] Re: Looking for a replacement for the old MUSA short sleeved merino wool jersey

I've been wearing jerseys from Portland Cyclewear for several years and love them. I even created my own logo to put on a couple which is kind of a fun thing to do. Marc On Tuesday, July 16, 2019 at 4:01:27 PM UTC-4, Rod Holland wrote:

[RBW] Re: MTB Hunqapillar questions

All I can say is that I love the Bullmoose Boscos on my 54CM Hunq. They provide a huge range of positions and are plenty strong to take an off road beating.

[RBW] What high security locks are people locking their bikes with?

I use Abus Bordo or Abus San Francisco U-Lock. Marc -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post t

[RBW] Re: What're the best cantilever brakes out there?

I've been really happy with the Velo Orange Gran Cru Zeste. I've been using them for nearly 5 years and both the stopping power and modulation is great. Marc On Sunday, April 14, 2019 at 8:00:01 PM UTC-4,

Re: [RBW] Re: SE Rivendell 25th Anniversary Celebration May 3/4/5 Greenville SC

I'm thinking of making this trip, are the roads suited better for Sam or The Hunq? Marc -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+un

[RBW] Re: Bosco bars grip suggestions

[image: sam.JPG] I have them on my Sam and Hunq. I tried some bolt on leather grips but have since switched to Riv cork on both. VO leather wrap on the rest of the bar (The "city bike" grip is long enough). I've also used Dia Compe "stoker" knobs as a midpoint grip and interrupter levers o

[RBW] Teach me about sealant in tubes?

I used Stan's for a season on my touring bike and was happy (no flats). So, when I replaced tires, I replaced the tubes with Flat Attack prefilled tubes. The sealant is gauranteed for 5 years. I haven't had a flat on the road in two years, and I ride about 10k per year. I get a puncture now a

[RBW] Re: RBW 25 -Atlantic side of things

I might be game for one or the other, depending on the logistics. I'll keep an eye out for this thread. Marc On Tuesday, January 22, 2019 at 7:12:30 AM UTC-5, Wally Estrella wrote: > > Hey Folks: > > OK, there seems to be enough interest for a two'fer on the east coast. A > Nor'Easter and a S

[RBW] Re: FS: Brooks B17

No interest? I'll drop it to $50 shipped CONUS and add a photo. [image: 0.jpg] On Tuesday, January 8, 2019 at 9:03:41 AM UTC-5, Marc Irwin wrote: > > Brooks B17, antique brown. Well used, well cared for. Some Profide and > a spanner included. $60 shipped USPS Priority CON

[RBW] FS: Brooks B17

Brooks B17, antique brown. Well used, well cared for. Some Profide and a spanner included. $60 shipped USPS Priority CONUS. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it

[RBW] Hunqapillar fender options

I've used VO Zeppilen with 45mm Marathons, SKS Velo with a variety of tires. I'm happiest with the SKS P65 and Schwalbe Big Ben 50mm tires. That makes it a very versatile bike. Marc -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To uns

[RBW] Re: What do Rivendell Riders use for brake shoes?

I use the Yokozuna salmon on all my bikes. I've used most of the stuff that comes around but the old Matthauser formula still feels best to me. Marc On Wednesday, December 5, 2018 at 9:46:28 AM UTC-5, Lum Gim Fong wrote: > > My stock R559/539 typr hollow shaft snapped upon tightening. > The thi

[RBW] Re: Did you have a 2018 cycling goal? Did you achieve it?

I had fun riding to more different places. Works for me. Marc On Monday, November 26, 2018 at 10:34:12 PM UTC-5, Kevin Mulcahy wrote: > > Oh, thanks Patrick, I almost forgot another goal of mine - ride fixed! > > On Monday, November 26, 2018 at 9:30:34 PM UTC-6, Kevin Mulcahy wrote: >> >> My go

Re: [RBW] Hunqapillar

You won't regret that. I bought one when it was first introduced. I use it for everything. I loved it so much I had to have the lighter version and bought a56 Sam the next year. I've been at N+0 for years since. I use Bosco's on both and love them. Marc -- You received this message beca

[RBW] Re: Glue for headbadge?

I recently used Gorilla Glue gel super glue. It seems to be just fine. It brushes on and holds place very well. I've used automotive accessory tape in the past but that is thick and leaves a visual gap between the badge and the tube. Marc On Monday, October 22, 2018 at 3:13:32 PM UTC-4, Da

[RBW] Re: Northeast Riv Unmeeting 2018, Interest/Headcount, Columbus Day Weekend

ht have a taker and for simplicity I think that might be easiest... > > Thanks! Sorry we won't see you!! > > -Alex > > On Wednesday, October 3, 2018 at 8:04:09 AM UTC-4, Marc Irwin wrote: >> >> Well Crap!! A family situation has come up and I have to bail on this

[RBW] Re: Northeast Riv Unmeeting 2018, Interest/Headcount, Columbus Day Weekend

cabin in my name? I think I > might have a taker and for simplicity I think that might be easiest... > > Thanks! Sorry we won't see you!! > > -Alex > > On Wednesday, October 3, 2018 at 8:04:09 AM UTC-4, Marc Irwin wrote: >> >> Well Crap!! A family situation h

[RBW] Re: Northeast Riv Unmeeting 2018, Interest/Headcount, Columbus Day Weekend

Well Crap!! A family situation has come up and I have to bail on this trip. I was really looking forward to it. I have a cabin (Tilipe) reserved and paid for, if anybody wants it I'll let the town clerk know so you can use it. Marc On Wednesday, September 12, 2018 at 1:09:23 PM UTC-4, Alex

[RBW] Re: Northeast Riv Unmeeting 2018, Interest/Headcount, Columbus Day Weekend

I just reserved my cabin. There's room to share if anybody is interested. What will be our meeting place and a safe place to park my car for a couple of days? Marc -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this

[RBW] Re: Northeast Riv Unmeeting 2018, Interest/Headcount, Columbus Day Weekend

I might be missing something, but how do you find out which are available for that weekend? I don't see any contact information beyond the reservation form. I take it we're looking at Pittsford the 6th, riding down and returning on the 8th is that right? Marc On Wednesday, September 5, 2018 a

[RBW] Northeast Riv Unmeeting 2018, Interest/Headcount, Columbus Day Weekend

I'm in. I'm not northeastern but it's not a bad drive, I just did the Erie canal in June. Either schedule worksfor me. Hunq or Sam? Marc -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving e

  1   2   3   4   5   >