Don't have one but can confirm it fits an Appa BUT..it fits better with
cantilever brakes. The horizontal cable on v-brakes tends to interfere with
the center strut on those racks.
On Sunday, April 2, 2023 at 8:29:27 PM UTC-7 Doug Van Cleve wrote:
> Howdy folks,
>
> Anybody have one collecting
Howdy folks,
Anybody have one collecting dust? These bolt on to an RBW Joe Appa fork,
correct?
Thanks, Doug
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
t
When you pull a bike off the wall/roof and pump up the tyres and the tubes
fail because they are so old you have too many bikes.
Signed,
Brendon sold-a-car-to-buy-another-Rivendell McLoughney
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
Hi all,
I’m preparing to try out Noodle bars on my Sam and am looking for the parts
below. If you’re interested in unloading, please let me know the condition
and price you’re looking for.
1. Stem - Nitto Tallux 225, 26.0 dia. clamp, 10 or 12cm reach
2. Brake Levers - Tektro TRP RRL-
As low as possible without pinch flatting. Usually that means 20-21psi
(2.2-2.4” tires)) for me at 160lbs. Lots of rocks and sharp edges where I
ride.
On Sunday, April 2, 2023 at 1:12:35 PM UTC-6 jwhit...@gmail.com wrote:
> For what it's worth I usually pump my 55mm Fleecer ridges to 18psi fr
For what it's worth I usually pump my 55mm Fleecer ridges to 18psi front
and maybe 22 rear. Probably bump that to 22 and 26 for very loaded touring.
On a daily basis I carry more than most, a chess set and several books? Why
not. I probably come in around 175-180 with clothes. My bike probably
but not in mermaid green.
please reply privately if you have one you'd like to sell.
Thanks.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-b
You're right about the tire sizes that will fit but I don't think any
completes sold with 32s unless it was a specific build Riv put together and
posted on the website. Romulus was only sold as complete and came with 28
Roly Polys (maybe it was Ruffy Tuffys) and the stock Ram completes I've
see
The Ram came as a complete with 32mm Panaracer Pasela tires. It will also
fit fenders with this tire. Without fenders, the Pasela 1 1/2" fits
easily. This applies to both the 622 and 559 rim editions, EXCEPT for the
early orange batch that came in with the rear brake bridge in too low. The
6