Great. A non consensus. My wife went away for the weekend to see Hamilton
It's justifiable to buy new parts in response, right?
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails fro
On my phone so can't PM, but thats a trade I could do. Have a 58 non bull moose
bosco that's been mounted but not ridden.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, sen
i like the esi's too. check out the wtb grips too, not bad.
On Saturday, March 25, 2017 at 8:44:58 PM UTC-7, Max Bergen wrote:
>
> I'm putting a Bullmoose handlebar on my new Hunqapillar. Using the bike
> for commuting around town (pavement) 50% of the time and trail riding
> around Southern Ca
+1 for V brakes. I don't mind setting up cantilevers at all, and I prefer
the way they look to V brakes, but it is ridiculous to say they are even in
the same ballpark re. stopping power IME & IMO. I have wide paul
cantilevers w/ salmon pads on my hunqapillar, and they stop as good as a
cantile
I'll take the king cages, on mobile and can't pm. Could you email
philipwkim@gmail?
Thnx
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+u
Another try on the photo link:
https://photos.google.com/photo/AF1QipO_gb6rP8cbBnb49ZwPI-07IFSgQbEZPhu22B9t
On Sunday, March 26, 2017 at 6:31:09 PM UTC-7, Belopsky wrote:
> photo link does not work for me
>
> On Sunday, March 26, 2017 at 8:58:33 PM UTC-4, Chris Halasz wrote:
>>
>> Spring clean
Yeah, those kind of "unbelievable" listings come up fairly often, though
usually even more underpriced. I would not buy from a seller with zero
previous deals unless I had good reason to believe they were legit. Nice
touch, the ding in the top tube.
On Sunday, March 26, 2017 at 9:44:22 PM UTC-4
I am not familiar with the ESI grips but would it be crazy to use cotton
tape over the ESI's? I like the idea of the great cushioning but like the
feel of cotton or cork. I am just wondering if regular cotton tape would
even stay put on the silicon grips.
I am going to use bullmoose bars on a
There has been a "scammer" selling underpriced bikes for a few years. He
creates a new account and lists one or two deals, but I don't get his/her
goal. Paypal would almost certainly retract any money. Hopefully someone
did not get ripped off.
Matt
--
You received this message because you
photo link does not work for me
On Sunday, March 26, 2017 at 8:58:33 PM UTC-4, Chris Halasz wrote:
>
> Spring cleaning exposed the following
>
> Devore 170mm triple FC-MT60 $30
> Tektro v-brake road levers $35
> Shimano Barcons beausage $30
> XTR front derailleur 31.8 $25
> UNO 27.2 250mm seat
I have the Bosco Bullmoose bar on my Clem.
For grips, I wrapped some cotton bar tape over a layer of felt (a la Riv).
https://flic.kr/p/Evy9hj
Bob E
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop
I agree with Brian. Once Shimano came out with the V brakes in '96, I (and
most mountain bikers) never went back to cantis again. V brakes are easy to
set up, no special juju required, and even cheap ones work fine.
Eric Daume
Plain City, OH
On Sun, Mar 26, 2017 at 8:15 PM, Brian Campbell
wrote
Spring cleaning exposed the following
Devore 170mm triple FC-MT60 $30
Tektro v-brake road levers $35
Shimano Barcons beausage $30
XTR front derailleur 31.8 $25
UNO 27.2 250mm seat post (nit-o-ish) $30
VO pedals $35
Dia-Compe 750 new $20
Selle Italia Ldy Gel Flow saddle $35
King cages (2) $25
I actually have a brand new 57cm Rodeo frame and fork still in the box. I have
all the parts to build it up but haven't had a chance. It is a beautiful
machine!!
Cheers!
Chris
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscrib
1200?? That's a $3000 bike! Conservatively!!
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this g
http://www.ebay.com/itm/2006-Rivendell-LEGOLAS-55cm-Cyclocross-Bicycle-/272605089599?hash=item3f78878f3f%3Ag%3A1m0AAOSwuxFY1wAF&nma=true&si=bRqjke3ORMatCf%252FgIji2eVk0hT4%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
:)
--
You received this message because you are subscribed to the Google
I guess I am the contrary voice. I think cantilever brakes are a poorer,
more complicated design than v-brakes and that the performance of v-brakes
is superior enough, in my view, to never equip a bike with canti's again.
Yes, I can set up cantis. I have used all manner of vintage and modern
ca
How have you gotten this far in life without one?
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to t
Sold, thanks.
On Sunday, March 26, 2017 at 12:26:03 PM UTC-5, Jim S. wrote:
>
> One last bump. Then I give up.
>
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
+1 on the ESI grips. I had bullmoose bars and liked those the best (tried
some ergon grips and bar tape). Great cushion and grip.
On Sunday, March 26, 2017 at 12:14:53 PM UTC-7, Joe Bernard wrote:
>
> I use Ergon small grips on a couple bikes with riser bars..the shape is
> similar to the WTBs
Awesome, excited to see the spaceframe built up and hear how you like it.
On Sun, Mar 26, 2017 at 2:10 PM, Geeter wrote:
> To revive my old thread, I love my Hunq. I also decided to sell my
> titanium hardtail (it is available!) and get a spaceframe. I will update
> when I get the build going!
For the encounters with poisons
plants: http://joettecalabrese.com/blog/perils-summer-poison-ivy-poison-oak/
With abandon,
Patrick
On Saturday, March 25, 2017 at 7:44:20 PM UTC-6, drew wrote:
>
> I went out after work last night to meet some friends at Musch camp in
> Topanga CA, which is only
Hi folks,
I've got a a never b'for used (i.e. new) set of Choco bars that I'd like to
trade for a set o' Bosco bars (both 'norms', not bull-moose ). Note, I did
install them--partially on the bike--then realized that I needed to jack up
the bars a bit, so then removed them, so they do have a sm
Should've clarified, these are both norms, not bull-moose.
Also, Should've said "would consider 55's" not 56-ers (which do not exist,
I believe).
Carry on! ;-)
On Sunday, March 26, 2017 at 6:29:52 PM UTC-4, a spens wrote:
>
> Hi folks,
> I've got a a never b'for used (i.e. new) set of Chaco
Hi folks,
I've got a a never b'for used (i.e. new) set of Chaco bars that I'd like to
trade for a set o' Bosco bars. Note, I did install them--partially--then
decided I needed to jack up the bars a bit, then removed them, so they do
have a blemish or two, thus distinguishing them from brand span
Bath with Epsom salt and oatmeal will help relieve some of the itching.
Don't use instant--too much sugar.
On Sunday, March 26, 2017 at 1:09:15 PM UTC-4, drew wrote:
>
> Oh yeah. It was tons of fun about 30 seconds after the hiking part was
> over except for the poison oak. That is still not
Paul Motolites are worth it on steep hills that make you pick up speed really
quick. Made the switch from Paul cantis and it is two finger braking. Even
Shimano XT v brakes are an improvement IME.
I remember the tektro CR720s we're decent on my velo orange a few years ago.
Recently put them in
YES! or a Roadini if wife / partner is iffy on big bike purchases. Then upgrade
later if "need" be !) :)
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rb
True, hydraulics are different -- more powerful. When I tried my next door
neighbor's mtb with hydraulics, even a very light pull with a couple of
fingers almost sent me over the bar.
On Sun, Mar 26, 2017 at 3:33 PM, Joe Bernard wrote:
> I might agree with you about mechanical disks, but not so
I might agree with you about mechanical disks, but not so much hydraulic. I
have them on my fast, heavy ebike, and they are significantly better at slowing
that contraption down than my first iteration of this type of bike with
v-brakes.
But getting back to the OP's question, CX70s on my Appal
To revive my old thread, I love my Hunq. I also decided to sell my
titanium hardtail (it is available!) and get a spaceframe. I will update
when I get the build going!
On Wednesday, December 21, 2016 at 7:18:45 PM UTC-6, Christopher Cote wrote:
>
> I just may take you up on that offer!
>
> On
+1 on Salmon pads. Essential.
Experiment when where you carry your load. You have a front loaded Hunqa. I
much prefer a rear-loaded Hunqa. And yes, you likely have plenty of
stopping power, but aren't used to pulling the brakes harder. (always use
your front brake more than your rear,). You are
Really not sure what had happened.
I rode these tires on my commuter for 3 weeks with no issues.
Took them on a pretty standard road ride today and got a flat 5.5miles in.
Coming home I got a flat again, as I rolled into the driveway. I havent
investigated (rain rain rain) but the tire had a sma
I would love a Roadeo; of all the Rivendells presently available, it's the
one I would choose first -- *if* I had the money.
And, just to annoy, I will state that I'd build it around a very nice
little Sturmey Archer AM hub that I've been hoarding, using a chain
tensioner.
But I don't think my ba
You do need a Roadeo. And so do I.
But I don't think my marriage could take another bike...
On Sunday, March 26, 2017 at 3:33:28 PM UTC-4, John G. wrote:
>
> I mean, it's patently obvious. Talk about self-evident truths, right?
--
You received this message because you are subscribed to the
Thanks, Pano. And to add to your data, the Dahon, on which I have the M
bar, has a fixed handlebar "mast" which does not allow adjustment either in
height or reach, and I find that my M bar is already higher than I find
entirely comfortable.
I've owned a good 6 of the original Moustache bar since
Drew: to follow up on my immediately earlier post, a properly working pair
of brakes of any sort will find an additional 30 lb of very little
consequence to their stopping power.
I forgot to add: since cantis require housing stops, be sure to use stops
that don't flex unduly. Some of the old stamp
Right.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@g
Great advice. I was surprised at how much an extra 30lbs really changed how
much speed control I had. I've taken the same bike, and another bike with side
pulls on equally steep trails and felt just fine. I imagine much of this
sensation had to do as much with maneuvering the weight as it did wi
The principal virtues of V brakes is that they are so easy to set up, and
that they don't require cable housing stops. Most decent brakes well set up
will stop fine, but V brakes are easier to set up so that they do this. I
don't think that V brakes as such are inherently more powerful than other
t
Drew,
I presume your recent S24O experience was your first (or at least one of
your first) with steep loaded riding?
So long as your cantis are properly adjusted, they should be all you need,
but there is learning and skill involved in knowing how to use them when
loaded and even more so when
I'm running a set of Snoqualmie Pass tires on my Atlantis. When I first got
them mounted, I was highly disappointed by their width--couldn't have been more
than 40mm. They were awful purty and supple, so I left 'em on. 400 miles later,
and they are definitely wider--probably around 43-44cm.
Gre
I mean, it's patently obvious. Talk about self-evident truths, right?
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegrou
I use Ergon small grips on a couple bikes with riser bars..the shape is similar
to the WTBs Jeremy mentioned. I tend to ride with my whole hand resting on top
of the grips - kinda like you might do on the flats of dropbars - and the
flattish shape at the ends is a nice resting spot for the heel
I've never used v brakes. I currently have the cx70's that riv sells. I like
them, but steep curvy stuff with a load can get a little scary. I'm ok with a
little scary, but I am curious about v brakes. So...
-is stopping power enough improved with v brakes to consider changing over?
-if so, what
The answer is in the phrase "power ratchet", which most of us here have used
and liked. You started with a weird attitude about why Riv should bother making
new shifters when we already have indexing from Shimano and MicroShift. You
didn't mention IRD.
--
You received this message because you
One last bump. Then I give up.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send ema
May I suggest:
Buy the Grab on Grips for DROP bars. They have two versions, a soft and a
harder foam. I use the harder foam. I have found that being able to slide
the controls all the way forward, then cutting the (long) grip to length to
be ideal. I end up with lots of hand roaming room, diffe
bump, update & price drop.
smart sams have solds.
chris king headset pending.
sackville remains. how about $150 plus shipping?
On Friday, March 24, 2017 at 12:37:24 PM UTC-7, ant ritchey wrote:
>
> Hey folks. Got a few things to move along here. Prices do not include
> shipping. PM/text (7247
Oh yeah. It was tons of fun about 30 seconds after the hiking part was over
except for the poison oak. That is still not becoming fun
I second a DP book of adventure stories. Put me down for one.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch"
Great account Drew - but I am sorry about the poison oak introduction. As a
former californian, I have had some nasty run ins with it. If bad enough
cortisone shots and/or cream will help.
Dennis now in PDX
On Saturday, March 25, 2017 at 6:44:20 PM UTC-7, drew wrote:
>
> I went out after work l
Haven’t been able to ride them much. From the outside, they look exactly like
Paris-Motos, but with a much bigger label (about 1/3 the way around the tire!).
--Eric Norris
campyonly...@me.com
@CampyOnlyguy (Twitter/Instagram)
> On Mar 26, 2017, at 9:46 AM, Belopsky wrote:
>
> How have the GKs
How have the GKs been?
I just got 2 flats on my Pari Moto. Rain and flats make for a bad time.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bu
Joe,
I mentioned three, Shimano, Microshift and Silvers. Then there are IRD
power ratchet shifters which makes four. You never answered my question
what were so great about suntours, a legitimate question. You answered a
question with a question" have you ever used the suntours" I personally
think
"Naked cotton bar tape. No shellac. Awesome stuff. Nothing feels better"
This is true, and I think the Deacon's wrapping on the naked bars. I like it
over ergon grips for my xxl hands.
-Kai
Brooklyn NY
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bun
I believe it is a fairly recent addition. If I could choose one all-purpose
tire that does everything reasonably well, the MSO might be it.
KJ
On Sunday, March 26, 2017 at 9:01:09 AM UTC-4, Chris Lampe 2 wrote:
>
> Interesting. I didn't know the MSO came in a 50mm size and Clement
> doesn't e
Spurcycle grip rings. By far the best grips.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this
I found them here, but not on their website.
https://www.universalcycles.com/shopping/product_details.php?id=79786&category=4190
On Sunday, March 26, 2017 at 8:01:09 AM UTC-5, Chris Lampe 2 wrote:
>
> Interesting. I didn't know the MSO came in a 50mm size and Clement
> doesn't even list it on t
Naked cotton bar tape. No shellac. Awesome stuff. Nothing feels better.
With abandon,
Patrick
On Saturday, March 25, 2017 at 9:44:58 PM UTC-6, Max Bergen wrote:
>
> I'm putting a Bullmoose handlebar on my new Hunqapillar. Using the bike
> for commuting around town (pavement) 50% of the time and
A great story and nice photos. Sounds like you got a good workout too. Hope
the camping part was fun.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-o
frame sold.
Clayton Scott
SF, CA
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send
I'll offer a different prospective from my MTB experience and my XXXL size
hands. I tried the ergo style grips but did not do it for me. What worked best
for me on Soma Clarence bars was longer grips that allowed me to rotate my
hands. I ended up double wrapping the bar ends with Cinelli cork ta
I am lucky to live near Rivelo in PDX but hope to make it to Walnut Creek one
day.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubsc
Patrick, I have not tried the Moustache but looking at the picture RBW has on
their website, superimposing the Moustache over the Albastache, I can not see
how the Albastache would offer much more comfort. Their shape is rather
similar. The only real difference I see, at least in my perception,
As a Clem owner, it's not the bike I'd choose for longer, sportier rides on
pavement. It's more of a beast of burden. Have you considered:
https://www.rivbike.com/collections/framesets/products/rosco-bubbe-frameset-51cm
Bill
Stockton, CA
On Monday, March 20, 2017 at 5:09:19 PM UTC-7, Roberta
I have the cork grips on them but I'm not a tough terrains rider. Have ESI on
other bikes and they are nice. One of my favorite grips are the black cork
ones that are actually a synthetic material. Google black cork grips and you
should be able to find them. They are more giving then the true
Patrick: you should write a book about your travel adventures, starting
with this one. I'm serious. Even the little errand runs in the snow for
that errandonee or whatever it was are entertaining enough for a wee
chapter.
Patrick Moore, whose only randonneuring is errandonneuring, and who hopes
sh
Sweet! Fantastic adventure! Way to persevere and enjoy what came your way.
It can be hard to figure out what the lesson is in such cases, short of
always keep your head and use common sense and know as much as possible
about navigation without technology, because all map technology shows what
w
Plus one for the ESI silicone grips. I've tried the cork on the bull moose but
just not enough cushion for me.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
Take a road trip to Riv and do some demo rides. It's not that far from
Oregon. :-)
On Thursday, March 23, 2017 at 11:35:57 AM UTC-4, Jonathan Donehower wrote:
>
> This is my first post. I have been commuting regularly now for over a
> year and ready to buy a new bike with my wife's support. We
Again, good point, to add to all the information others have passed on
about the Albastaches, particularly describing how the Albastache is more
comfortable than the original Moustache. I'll look out for a used pair.
Come to think of it, the obvious place to try an Albastache would be my
Dahon Hon
I really like the ESI silicone grips. I have em on my bosco'd Bridgestone MB
and my Jones-Bar'd Salsa. They're grippy, comfy, and MUSA.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving email
I could be making this part up, but wasn't part of the plan to allow the
shifter assembly to rotate on the mount? As it's said, choices are good, why be
locked from 1 to 5 o'clock on the shifter dial? Quality rotating mounts would
be a very good thing.
-Kai
Brooklyn NY
--
You received this m
Interesting. I didn't know the MSO came in a 50mm size and Clement doesn't
even list it on their website. I see that Black Mountain Cycles has one
left in stock. Is it brand new or something that is being discontinued?
On Saturday, March 25, 2017 at 8:23:08 PM UTC-5, Kieran J wrote:
>
> T
Adam,
Let me see if we've got another appropriate frame in the shop. If so, we
can do it. I'll get back to you first thing Monday. Thanks!
On Sun, Mar 26, 2017 at 12:28 AM, adam leibow wrote:
> If there were a chance you'd sell the 51 as a F/F/HS, I might be
> interested.
>
> On Thursday, Mar
Nice/funny ride report. Hope the camping spot was good. The area certainly
looks pretty. I suppose google maps is a place to start and then you pick up
experience and knowledge of the best routes. An exception would be the people
you hear about who get lost for days in the unmarked 4wd roads in
I have heard rumors of a Soma Cazadero in 700x50. The Terrene Honali 700x50
was announced last week, and you couldn't go wrong with the Clemet MSO
700x50 if they roll as well as the 40s.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To u
The planned new shape (like ST thumbies) was written about in the blug or email
or somewhere in cyber-space. Plan A fell through, Plan B may be an option. They
were not exact replicas of the ST though, as they still used the same diameter
ratchet system as they have now, which is a replica of th
Patrick, to give you prospective on where I'm coming from, my drop bars are
typically 46cm (outside to outside) and the ones I use on all of my bikes are
the Deda Zero100 and the Ritchey Logic Classique. The Albastache, being about
10cm wider, took a bit of time getting used to them but the huma
79 matches
Mail list logo
