Hi All,
I have searched by whole system for radwho.cgi and
radacct.cgi.
They are not in the "/goodies" directory
either.
Please, where can I find them?
I have radiator installed (rpm) on a RedHat 7.2
system.
Radiator is configured to use SQL.
Thanks.
Tunde Itayemi.
NB: Alternatively, ple
Hi all,
I have a radiator version 2.18.4 installed on an OpenBSD 2.7.
I have Realms authenticated by LDAP
For that I use the rewriteUsername feature.
My problem is that in the accounting logs I don't have the field
"login@realm" but only "login"
It's a bloquing problem cause we must make account
Hi All,
I've a problem whit my system Radiator 2.17.1
It receives access-request from dialin throught the Nas
with user-name encrypted
I don't know where is the problem because I did all test with radpwtst GUI and I
verified the correct configuration
The NAS is a Cisco 5300
It doesn't work fin
Hello everyone,
I think I'm getting closer. I changed blockcli.prw to:
username Calling-Station-Id = /^555/, Called-Station-Id = /111/,
Auth-Type = "Reject: Calling station not valid for 111"
DEFAULT Auth-Type="Accept"
And in radius.cfg I changed ContinueWhileAccept to ContinueUntilReje
Hi
I am somewhat confuse about how or when Radiator
issues an Accounting Request. All I am trying to do is to update the
balancetime field in the subscribers table on an informix database. I am
not sure if I need to define an AccountingTable in order for me to update the
subscribers table
Hi All,
I have sent this mail earlier today. Please can someone mail me the
two files or tell me where to find them?
I have searched by whole system for radwho.cgi and
radacct.cgi.
They are not in the "/goodies" directory
either.
Please, where can I find them?
I have radiator installed (r
I am trying to install Radiator 2.19 on a Cobalt XTR. I have got
Radiator installed and it test fine with "radpwtst", but I can not
get any external connections to authenticate.
I have radiusd starting in the inittab with the following command.
ra:2345:respawn:/usr/bin/radiusd -config_file
/usr/
hi,
1. check your secrets
2. run radiator at trace 4 and check to see if you are even seeing the
requests
3. are you using cobalt's basic firewall or the sun cobalt adaptive
firewall? (if so check your rulesets)
4. are there any other firewalls inbetween?
If you see the connections in Tr
I'm sorry to bother you about administrative stuff, but I can't get any
answer when sending request to [EMAIL PROTECTED]
Could someone unsubscribe [EMAIL PROTECTED] from the mailing list
? The majordomo bot can't do it, because it says it's subscribed multiple
times (which sounds true). Could t
On Fri, Feb 15, 2002 at 09:38:37AM -0500, Viraj Alankar wrote:
> Now I was able to get it working with the following config. However, it
> appears the select query is still called twice when the callerid doesn't exist
> in the table. Basically in this config I took out the options in
> VE_Check_C
Ok, I just deleted the Framed-IP-Address = 255.255.255.254 from each record
and the is still show connecting. Here is the Trace 4, config file and an
example user entry.
Wed Feb 20 18:06:41 2002: INFO: Duplicate request id 146 received from
65.162.142.7(1029): ignored
Wed Feb 20 18:07:21 2002:
This might have something to do with your config on the AS5300.
What IOS are you running? I had similar problems until I flashed to a
new IOS.
-Ronan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Fabio Nitti (TEI)
Sent: Wednesday, 20 February
They should be in your Radiator directory. Not in the goodies
directory. That is where mine were from source. Never extracted from
RPM though.
-Ronan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Tunde Itayemi
Sent: Wednesday, 20 February, 2002
Hi,
Is it possible to reduce the size of the detail file
by not recording some lines that our billing system does
not require such as Proxy-State, etc.
As we only use stop records for accounting it would also
be handy if we did not record start and alive records if at all
possible.
Bar
Hello -
I've limited simultaneous use to 1 session per username. When the same user
attempts to log on again, h/she is blocked but getting an error "691: cannot
log on because username and/or password is invalid for the domain". My
question is how to have the error message in "RejectHasReason"
Hello Fabio -
What you show below looks more to me like modem noise rather than encryption.
I think you should check your modem and the modems in the 5300.
For testing, you can set up radius authentication on a vty on the Cisco and
telnet to it to verify radius operation.
regards
Hugh
On
-- Forwarded Message --
Subject: BOUNCE [EMAIL PROTECTED]:Non-member submission from ["Nguyen
Tuan Anh" <[EMAIL PROTECTED]>]
Date: Wed, 20 Feb 2002 19:54:56 -0600
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
>From [EMAIL PROTECTED] Wed Feb 20 19:54:56 2002
Received: fro
Hi all
I log login error by using AuthLog
FailureQueryinsert into
RadAuthLog(Time_Stamp,username,realm,nasipaddress,nasport,reason) values
(getdate(),'%U','%R','%N','%{NAS-Port}','%1')
Normally, It works fine but when I limit Calling station ID, the error
message occurrs when logging
Hello Tuan Anh -
Thanks for bringing this to our attention. This is a bug that has been fixed
in Radiator 3.0, so if it is not causing you too much trouble at the moment
we would suggest you wait until Radiator 3.0 is released and upgrade.
regards
Hugh
On Thu, 21 Feb 2002 14:47, Nguyen Tua
-- Forwarded Message --
Subject: BOUNCE [EMAIL PROTECTED]:Non-member submission from ["Nguyen
Tuan Anh" <[EMAIL PROTECTED]>]
Date: Wed, 20 Feb 2002 23:44:31 -0600
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
>From [EMAIL PROTECTED] Wed Feb 20 23:44:31 2002
Received: fro
20 matches
Mail list logo
