Hello Hugh,We have checked the network usage using a sniffer and
the usage is not more than 20% of capacity at peak. We did run radius in trace 4
debug mode for a while but were not able to tell much from the file as to why
the online users are incorrect in the RADONLINE.
We did notice th
Hello Hugh,
I want to address a situation where the NAS has crashed when a number of users have
been logged on to the nas.
The NAS will at boot up time issue an acct-on to the RADIUS server (directly or via
RADIUS roaming).
Will the Radiator then close each open accounting issues (i.e. only th
Hello Anders -
At 12:14 +0100 01/2/13, Anders Marius Jørgensen wrote:
>Hello Hugh,
>
>I want to address a situation where the NAS has crashed when a
>number of users have been logged on to the nas.
>The NAS will at boot up time issue an acct-on to the RADIUS server
>(directly or via RADIUS roa
Hi,
I just noticed (the hard way, of course) that there is a small typo in
the reference manual for 2.17.1.
In section 6.26.15 "in fine" the example says:
# Log all accounting to a single log file in LogDir
AcctLogFileName %L/misseddetails
and should say:
# Log all accounting to a single log
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Hi every one.
I got a little problem and I hope some one can give me an idea what should
be happening.
Here I've a 3Com chassis with Hiper DSP cards and Hiper ARC router. I been
looking at the online dial-up users list,
Hi,
We're trying to setup Radiator to work with our Cisco AS5300 to do Voice over IP.
We have things (basically) working, it will authenticate off of caller ID, etc. But,
there are a few extras we'd like to do and need some advice on.
First, has anyone used Simultaneous-Use with th
Hello Sergio -
At 17:28 -0500 01/2/13, Sergio Gonzalez wrote:
>*This message was transferred with a trial version of CommuniGate(tm) Pro*
>Hi every one.
>
>I got a little problem and I hope some one can give me an idea what
>should be happening.
>
>Here I've a 3Com chassis with Hiper DSP cards
Hello Jeremy -
At 17:54 -0500 01/2/13, List Account wrote:
>Hi,
>
> We're trying to setup Radiator to work with our Cisco AS5300 to
>do Voice over IP. We have things (basically) working, it will
>authenticate off of caller ID, etc. But, there are a few extras
>we'd like to do and need
--- Forwarded mail from [EMAIL PROTECTED]
Date: Wed, 14 Feb 2001 01:10:16 +1100 (EST)
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: BOUNCE [EMAIL PROTECTED]:Non-member submission from [Dirk Laan
<[EMAIL PROTECTED]>]
>From mikem Wed Feb 14 01:10:12 2001
Received: by oscar.open.com.
>
>
>I'm trying to autheticate a user to Radiator.
>I get the following error from the radius client (Cisco)
>What is wrong ?
>
>This is the output on the nas:
>%LINK-3-UPDOWN: Interface BRI0:2, changed state to up
>%ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 81 changed to up
>AAA/AUTHEN: cre
I've been developing a MySQL based authentication system for our users. We
are using Radiator version 2.14.1. I need to trap the reason for authentication
REJECTs. (for e.g expiration
date passed or session timeout ), and update the database to indicate a
status for each user. I was hoping to do
hi,
Just wondering if it is possible to use radwho.cgi with multiple
accounting servers. I am thinking about using DBM instead of SQL.
Daniel
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe ra
12 matches
Mail list logo
