I would consider
"transparent").
Would be a bad idea. But maybe it would be interesting if the layer 2
/could/ be tunneled including the EAPOL packets for e.g. home ADSL users
or something.
As far as 802.1aa is concerned: I just downloaded the draft, I'm curious
what new it
all Cisco switches have transparent EAP transport so
that should be no problem.
(I've tried EAP-TLS, TTLS, PEAP and MD5 with a Catalyst 6509.)
The only AP I know of that has no transparent EAP support is the (old)
Lucent AP1000...
Regards,
Paul
===
Archive at http://www.open.com.au/arc
his username and password combination is stored, and never asked again
(like with the TLS identity), unless there is an "Access-Reject" from
the RADIUS server.
As soon as the request is /ignored/ (because of a non-existing realm for
example) windows does not prompt the user for new cred
x27;s, you also need a tag in the attribute -
otherwise the VLAN-ID is not accepted at all and the user gets the
default VLAN instead.
Regards,
Paul
Arangeh, Dordaneh wrote:
Hello -
Thanks for your answer.
With dictionary every thing is fine. I activated a log file for DB to
see weather it send
line to change its
"localhost" to the actual IP so that would work, but I'm still having the same
problem. Normally it bnids to 0.0.0.0 but I've changed it to
BindAddress 203.100.100.100, 192.168.1.100,
127.0.0.1
Any ideas on how I can get this
working?
Regards,
Paul R
a complete list, or at least
the ones I am looking for. Any help would be greatly appreciated.
Regards,
Paul Rivoli
[EMAIL PROTECTED]
K B S I N T E R N E T
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL P
s anyone know of a solution or work around to get RID working
in this situation. Any help would be much appreciated.
Thanks,
Paul
live
Acct-Session-Id=000337E0 Framed-Protocol=PPP Framed-IP-Address=192.168.5.200
Acct-Authentic=RADIUS Calling-Station-Id=039868
Called-Station-Id=142320198100200 NAS-Port=6276 Service-Type=Framed-User
NAS-IP-Address=192.168.5.36 -user radiustest
NAS-Identifier=accserver039.kbs.net.au
Regar
rel/ps5013/prod_release_note09186a0080088185.html
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121relnt/5400/rn5400xm.pdf
hth
Paul
___
Paul O'Shea
Level9 Networks
- Original Message -
From: "Hugh Irvine" <[EMAIL PROTECTED]>
To: "Kevin Littlej
rel/ps5013/prod_release_note09186a0080088185.html
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121relnt/5400/rn5400xm.pdf
hth
Paul
___
Paul O'Shea
Level9 Networks
- Original Message -
From: "Hugh Irvine" <[EMAIL PROTECTED]>
To: "Kevin Littlej
I've just upgraded my secondary radius server to Redhat 9. I get the
following message when I try to start Radiator.
Could you please remind me how to reinstall Radiator?
Regards. Paul
/usr/sbin/radiusd -config_file /etc/raddb/radius.cfg
Can't locate Radius/RDict.pm in @INC (@IN
myuser','1.2.3.4','00062398','1059044257','5.6.7.8','6256','Async','
Framed-User','0312345678','03912345678', '6F419DF2',
'2185','346903','2410144','61', '15', '45333', '26400', '[EMAIL PROTECTED]')':
Duplicate entry '1.2.3.4-6256' for key 1
If you have any ideas that'd be great. Thanks
Regards,
Paul Rivoli
[EMAIL PROTECTED]
K B S I N T E R N E T
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
Below is an example for you:
Note the example contains some Oracle specifics (bind variables).
hth
Paul
sub {
# OBJECT REF
my $p = ${$_[0]};
my $r = ${$_[1]};
# RETURN VOID
return unless ($p->code()
.
-
Seriously though, I have seen ISAPI filters around for IIS that let you
authenticate to Radius but none freeware..do a search for ISAPI and RADIUS
on search engines..
cheers
Paul
<>
dial it should go
>ahead and try to AuthBy them, etc.
>
>Thanks,
>Chris
>
>
>===
>Archive at http://www.open.com.au/archives/radiator/
>Announcements on [EMAIL PROTECTED]
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' i
rehook to check
state when users login, to ensure its set to zero... but then you might end with
probs when you don't get 'stop' records to clear the state... anyway I'm sure
Hugh has a much cleverer solution :-)
Paul
- Original Message -
From:
Shaun
To: [
ou might end up
having to buy some hefty machinery to cope with the traffic.
We recently had a similar issue with GPRS PDA's and
unfortunately even if you send DNS attributes most OS's ignore them if they have
user specified entries...
hth
Paul
- Original Message
this a known bug?
cheers
Paul
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
Is this known or can somebody try and repro?
thanks muchly
Paul
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
Hugh,
Do you know where I could find one of the below mentioned scripts to run in
cron to scan the session table?
- Original Message -
From: Hugh Irvine
To: Paul ; [EMAIL PROTECTED]
Sent: Tuesday, April 23, 2002 12:53 PM
Subject: Re: (RADIATOR) Lost Stop Record Scripts
Hello Paul
Dear All,
Does anyone have any scripts that can scan through a logfile and/or an SQL
table and locate lost stop records, or identify which sessions have been
lost based on Alive packets. We are having problems with Lost stop records
and need to locate them so we can pass them onto our developers.
I'm still trying to make my rewrite rules do exactly what I want.
What rule would I need to string leading white space from the
username?
Also what does the first rule shown below do?
Regards. Paul
>>
>> RewriteUsername s/^([^@]+).*/$1/
>> RewriteUsername tr/A-Z/a-z
ns in Trace 4 then most likely there is something
dodgy in your config - if you look carefully at the logs you should be able
to identify what... If you are still having problems you should send your
config and trace 4 logs to the list (sans secrets & IP's).
hth
Paul
-Or
t examples, you'll will need to tailor them to your specific
needs.
Hope this helps.
Paul
___
Paul O'Shea
Level9 Networks
___
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Steve Rainbow
Sent: Frid
Most OSS tools can make RADIUS requests - we use ISM Netcool, even some load
balancers like the Alteon AceDirector can make active health checks. If your
tool can't make RADIUS requests you could try adapting 'radpwtst' and use
that in a script as a testing tool to check if Radiator is running. Al
Use - see link below:
http://www.open.com.au/radiator/ref.html#pgfId=399952
P
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of alexus
Sent: 16 January 2002 20:46
To: [EMAIL PROTECTED]
Subject: (RADIATOR) syslog
how can i make radius to log into syslog
dictionary
into the standard dictionary.
Hope this helps.
Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of alexus
Sent: 16 January 2002 22:46
To: [EMAIL PROTECTED]
Subject: (RADIATOR) Wed Jan 16 17:38:13 2002: ERR: Attribute number 13
(vendor 529) is n
Accounting-Request
Identifier: 90
Regards. Paul
# livingCompat.cfg
#
# This is a simple Radiator config file that allows you
# to continue using a bog standard Livingston or
# similar users file with Radiator, It implements the
# Auth-Type="System" check item by using AuthBy U
.
Also download the manual:
http://www.open.com.au/radiator/ref.html
Its very well written and will answer most of your questions - as a user I
have found it very useful :-)
Good luck!
Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Hugh Irvine
Sent
DR,'.')+1) ,'.')),'.')-1),3,'0')) "Min IP"
,
max(
lpad(substr(YIADDR,1,instr(YIADDR,'.')-1),3,'0')||'.'||
lpad(substr(substr(YIADDR,instr(YIADDR,'.')+1),1,instr(substr(YIADDR
,instr(YIADDR,'.')+1) ,'.')-1),3,'0')||'.'||
lpad(substr(substr(substr(YIADDR,instr(YIADDR,'.')+2),instr(substr(YIADDR,in
str(YIADDR,'.')+1)
,'.')),1,instr(substr(substr(YIADDR,instr(YIADDR,'.')+2),instr(substr(YIADDR
,instr(YIADDR,'.')+1) ,'.')),'.')-1),3,'0')||'.'||
lpad(substr(substr(substr(YIADDR,instr(YIADDR,'.')+4),instr(substr(YIADDR,in
str(YIADDR,'.')+1)
,'.')),instr(substr(substr(YIADDR,instr(YIADDR,'.')+2),instr(substr(YIADDR,i
nstr(YIADDR,'.')+1) ,'.')),'.')-1),3,'0')) "Max IP"
from radius.radpool group by POOL
order by 2;
Thanks,
Paul
___
Paul O'Shea
Level9 Networks
___
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
ript for Access Requests and not
just AcctStops.
I know next to nothing about perl tho... so there might be something major
wrong with this, but it seems to do the job :-)
Thanks,
Paul
-Original Message-
From: Mike McCauley [mailto:[EMAIL PROTECTED]]
Sent: 28 Novembe
Hi Sam,
Pretty sure that you need to use a capital 'O'
e.g.
DBSource DBI:Oracle:sid
Thanks,
Paul
Dear Genius,
I am trying to config. a radiator (2.19-demo) using in order
to contact to a Oracle 8.1.7(the oracle and the radiator are on the same
machine.) However, I did n
o I don't think I can use a hook. Also the DBA's
involved won't let me use a stored procedure :-(
If anyone has any experience with this, some help would be much appreciated
:-)
Thanks,
Paul
___
Paul O'Shea
Level9 Networks
___
==
In what I've seen so far, it is the NAS that does the countdown.
Radiator can send the Session-Timeout attribute to the NAS and the
latter uses this as the starting point of the countdown. When the user
logs out, the NAS sends the Account-Session-Time attribute which is the
amount of time the us
Hi. Check out AddressAllocatorSQL and AuthByDYNADDRESS in the Radiator
manual. The former defines the pools and the latter defines which pool a
specific realm will use.
Scott Brown wrote:
>
> How do I set RADIATOR to assign an IP-Address from a pool of numbers set in
> a SQL database?
>
> Scot
Framed-Protocol = PPP,
Framed-IP-Address = 203.203.203.203,
Framed-IP-Address = 204.204.204.148,
Framed-Netmask = 255.255.255.252
Is there any other way as the assigned ip and routed
subnet are different?
Thanks,
Paul
===
Arc
is from Radiator 2.18.4. Surely they should both check the Original
(presented at the NAS) username?
=
Paul Rolfe
Online Operations Manager - EFTel Pty Ltd
QV1 Office: +61-8-94814999
Mandurah Office: +61-8-95861810
http://www.eftel.com
"O
Hi,
If we get a rejection we recieve the line below with the word Proxied
appended. What
causes this to be proxied and how can I stop it from happenning?
## LINE
Thu Sep 20 13:13:30 2001: INFO: Access rejected for
[EMAIL PROTECTED]: Proxied
Regards,
Paul
===
Archive at http://www.open.com.au
e 106,
line 22.
Thanks,
Paul
I have set up a new AcctLogFileFormat and was wondering why I am not
getting 2 values back?
AcctLogFileName /var/log/radius/new.log
AcctLogFileFormat
%{Timestamp}|%{Acct-Session-Id}|%{Acct-Status-Type}|%{User-Name}|%{User-
Password}|%{Class}|%{NAS-IP-Address}|%{NAS
ecret});
Can someone please help?
Thanks,
Paul
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
ng if the fails, it will reject the user
completely and
not send the accounting packet? If this is the right way to do it? I
basically
do not want the radius server to know about it unless it authenticates
of the
flat file correctly.
Cheers,
Paul Thornton.
===
Archive at http://www.open.com.
Is it possible to get Radiator to authenticate based on username only, even
if the username is rewritten to include the realm? (it is required that we
rewrite to include the realm as our radius supports over 8 different
"providers" and we need to be able to account for them all based on
usern
--
Code: Access-Request
Identifier: 123
Authentic:
<151><168><246><243><172><218><207><108><224>Kuw<216><133><243>[
Attributes:
User-Name = "[EMAIL PROTECTED]"
User-Password =
"<232>
,
Paul Thornton.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
message always appears:
NOTICE: SIGTERM received: stopping
Even we didn't send in any signal to stop it.
Strange...
Thanks you
Paul
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
Hi,
At least for 2.17.1, the changePassword.pl script only handles plain-text
passwords. You'll need to modify it to suit your needs.
Johann
At 11:15 AM 7/30/01 -0400, you wrote:
>Hi,
>
>Update to Passwords : "BCS AAA Radius & Radiator"
>
>Actually looking for promised working functionality w
Hi. We're encountering a problem wherein the Cisco AS5300 sometimes (as in
around 1% of the time) does not send the Framed-IP-Address during
accounting stop. It seems to be occurring randomly. Although it only
occurs just 1% of the time, it causes problems because AuthByDYNADDRESS
needs the
I have noticed some errors appearing on my ACC/Tigris console (cannot open RADIUS
session (no configuration defaults)). The Tigris
support person says I need to setup some default radius parameters. How should I go
about this with Radiator?
Regards. Paul
From: "Nathan Chan&quo
Sorry for the multiple postings. I was used to quick receipt of the
message I posted and so I thought there was something wrong (such as the
list rejecting email with attachments) when I didn't immediately receive a
mail from the list.
===
Archive at http://www.open.com.au/archives/radiator/
to
>>[EMAIL PROTECTED] using -f
>>X-Sender: [EMAIL PROTECTED]
>>X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
>>Date: Mon, 28 May 2001 08:56:17 +0800
>>To: [EMAIL PROTECTED]
>>From: [EMAIL PROTECTED] (Johann Vincent Paul U. Tagle)
>>Subject: (RA
en.com.au: majordomo set sender to
>[EMAIL PROTECTED] using -f
>X-Sender: [EMAIL PROTECTED]
>X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
>Date: Mon, 28 May 2001 08:56:17 +0800
>To: [EMAIL PROTECTED]
>From: [EMAIL PROTECTED] (Johann Vincent Paul U. Tagle)
>Subject: (RADIA
en.com.au: majordomo set sender to
>[EMAIL PROTECTED] using -f
>X-Sender: [EMAIL PROTECTED]
>X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
>Date: Mon, 28 May 2001 08:56:17 +0800
>To: [EMAIL PROTECTED]
>From: [EMAIL PROTECTED] (Johann Vincent Paul U. Tagle)
>Subject: (RADIA
Hi. We're using Radiator 2.17.1 with MySQL. I encountered an error using
AuthBy DYNADDRESS:
The logfile (trace 4) shows:
Sat May 26 23:58:26 2001: ERR: do failed for 'update RADPOOL set STATE=1,
TIME_STAMP=990892706,
EXPIRY=990919371, USERNAME= where YIADDR='64.94.97.141' and TIME_STAMP
=98
I dont know about a kill packet, bit I have found that if someone logs
in with a comma in their username by mistake, it causes my Radiator
process to die.
Regards. Paul
> Received: from Nathan [202.22.161.42]
> Hello,
>
> I am just wandering how is can actually send the ki
ked radius client to send to the remote server
with the identifier from the NAS? Or is there another solution?
=
Paul Rolfe
Online Operations Manager - EFTel Pty Ltd
QV1 Office: +61-8-94814999
Mandurah Office: +61-8-95861810
http://www.eftel.com
===
Archi
> Paul,
>
>Where do we get it at?
>
> jp
Doh! That was a bit of an oversight.
You can get it at http://sourceforge.net/projects/radstock
Paul
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED
opted it as our primary diagnosis
tool on our radius servers. Here is a snippet from the README.
Hope you find it useful,
Paul Rhodes
Radstock is primarily a sysadmins tool to diagnose problems with
radius server configurations. It was written because I always found
snoop/tcpdump to be a poor a
Hi Mike,
I'm using the latest version of Radiator/Radmin. I would like to add
Connection Speed and Calling Number to the RADUSAGE table. What do I need to
do in order to get Radiator to write these values into the MySQL database when
the customer logs in?
Regards. Paul
===
Archive at
Hi Mike,
I am now setting up mod_auth_mysql from
http://bourbon.netvision.net.il/mod_auth_mysql, this will allow me
to authenticate the people wanting to look at the listUsage.pl page. Once they
have got access to the usage page, how can I stop pat from looking at joe's
usage?
Cheers.
version?
Regards. Paul
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
Hi Mike,
What do I need to do to get back onto the Radmin Mailing list?
Thanks. Paul
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
dy has pat in it. So I click the search button and Radmin comes back with
a list of the usage for fpatruno, pat, patrick and patto. This is a problem
because I had already told Radmin that I wanted the usage for pat.
Could you let me know if this is a known problem and when it might be fixed.
Rega
About a year ago I added a function to the Site.pm file to allow a user to be
added to the shadow password file when the user was added using the Radmin
interface (which adds the users details to a MySQL DB). The problem is,
sometime in the last few months, the function to add the user to ther sha
iated.
Regards. Paul
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
dd an Identifier to the Client clauses and use that as a Check item
in a users file entry ?? Or is there another way ??
Creating Handlers for each client is not the way I would like to do it.
Paul
--
Paul van der Zwan paulz @ trantor.xs4all.nl
"I think I'll move to the
Is there any chance of a multi-threaded Radiator ?? We are running into
performance
issues without running out of CPU cycles . Multi-threading might give us
some more
performance out of the same boxes.
Paul
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL
http://lwn.net/2000/0210/a/mysql.html
Title: a/mysql
Date: Tue, 8 Feb 2000 20:03:32 +0100
From: Robert van der Meulen <[EMAIL PROTECTED]>
Subject: Remote access vulnerability in all MySQL server versions
To: [EMAIL PROTECTED]
Hi,
Below you find a security advisory i wrote co
Hi Mike,
Thanks for that The config will be changed according to your advice.
Regards,
Paul
Dans son message (In his/her message), Mike McCauley ecrivait (wrote) :
> Hi Christophe,
>
> My advice is to reduce the DupInterval to something like 2 seconds. It is
> really only
Return-Path: <[EMAIL PROTECTED]>
Received: from oscar.open.com.au (oscar.open.com.au [203.63.154.1])
by tiberius.accn.org (8.9.3/8.9.3) with SMTP id BAA02286
for <[EMAIL PROTECTED]>; Sun, 9 Jan 2000 01:27:40 -0500 (EST)
Received: (from majordom@localhost) by oscar.open.com.au (8.6.12/8.6.12) id
overflowing the queue
per minute.
As a quick hack I replaced the AuthLDAP2.pm file with the one from 2.13.1, resulting
in the disappearance of the overflows.
This is not the kind of solution I would like them to use ;-)
Is there a permanent fix possible for this problem ??
Paul
===
Archive
, all lagit
users are only allowed on and everyone else is denied. I haven't played
with the config file for quite some time and forgot the most BASIC thing.
Well, There's Egg on my face!
Sorry for the pain.
Paul Thornton.
,- __ -, DOVE AUSTRALI
now happenning? This use doesn't even exist on our server.
Regards,
Paul Thornton.
,- __ -, DOVE AUSTRALIA SYSADMIN TEAM
/ \___/ /__ _ _/ \
/ _ / _ / _ \ |/ / -_) _ \ Account queries: [EMAIL PROTECTED]
/.- \_,_/\___/___/\__/-.\ Tech Su
--
AcceptIfMissing
Filename /usr/local/etc/raddb/users
Identifier System
Filename /etc/master.passwd
--
All DEFAULT entries in the users file have been removed.
Regards,
Paul Thornton.
,- __ -, DOVE
med-User,
Framed-Protocol = PPP,
Framed-MTU = 1500,
Framed-IP-Address = 1.2.3.4
DEFAULT Auth-Type = System
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-MTU = 1500,
her number attempting to connect other than 111222333 would be
rejected.
Regards,
Paul Thornton.
,- __ -, DOVE AUSTRALIA SYSADMIN TEAM
/ \___/ /__ _ _/ \
/ _ / _ / _ \ |/ / -_) _ \ Account queries: [EMAIL PROTECTED]
/.- \_,_/\___/___/\__/-.\ Te
suspended by
setting a field in the Radiator database.
Could you suggest how to retain ContinueWhileIgnore and get the login
profiles to work?
Regards. Paul
Trace 4
DbDir /etc/raddb
LogDir /var/log/radacct
DictionaryFile /etc/raddb/dictionary
RewriteUsername s
ix's like the U prefix above?
regards. Paul
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
d you let me know if I'm
doing something wrong, or if I am seeing a bug in Radiator?
Regards. Paul
>PostAuthHook sub {
> my $reply = ${$_[1]}; \
> my $reqst = ${$_[0]}; \
> my $status = ${$_[2]}; \
> print "\n";
put an empty clause in the handler.
It looked like a handler without any AuthBy clauses does not send and
accounting replies.
Paul
--
Paul van der Zwan paulz @ trantor.xs4all.nl
"I think I'll move to theory, everything works in theory..."
===
Archive at
. Could this be due to having the PostAuthHook
in the section? If so where should I put the PostAuthHook? Do
I need to add in a section?
Thanks. Paul
User =rjensen Days = ACCEPT = 0 Status = 0
User =gstearn Days =129.84 ACCEPT = 0 Status = 0
User =gstearn Days = A
. My first thought would be:
PostAuthHook sub{ print(_[0][2]); }
second thought
PostAuthHook sub { print(_[0]->Days-Since-Added); }
or is there some other way that I should do this?
Regards. Paul
Mike McCauley wrote:
> Sorry, not word-for-word.
> One approach you might take is to
Thanks Mike,
The way I want to do this is to perform the calculation of the trial period
duration and then send an email when the customer has succesfully logged in.
Could you show me an outline of how to do this with Radiator?
Regards. Paul
> > What I would like to do next is
staff and to the customer) when a TRIAL user is in the 10th day of
their trial login period. I can see that ADDEDDATE is set correctly, how can I
work out if they have been in the trial period for 10 days or more?
Regards. Paul
Mike McCauley wrote:
> > What do I need to do to not let th
passwd file is MySQL is not running?
Regards. Paul
My Radmin config is as follows:
Trace 4
DbDir /etc/raddb
LogDir /var/log/radacct
DictionaryFile /etc/raddb/dictionary
RewriteUsername s/^.*\\|@.*$|^\s+|\s+$//g
# This clause defines a single client to listen to
# You
n if their SERVICESTATE in the Radiator database is set
to SUSPENDED. Could you let me know how I could go about this?
Regards. Paul
Mike McCauley wrote:
>
> Hello Paul,
>
> You would add these to you AuthBy RADMIN claause:
>
> # The following is all on one line:
&
AXIDLETIME field in the Radmin DB is not getting set into
the Idle-Timeout attribute?
Regards. Paul
Mike McCauley wrote:
> Ive had a look at the log, but Im not sure whichg user is the one demonstrating
> the problem? I can see one access accept for "altrex" with a Session-Time
adius login
messages. I've seperately emailed you the logfile and the radius.cfg file.
Could you let me know where I have gone wrong?
Regards. Paul
Mike McCauley wrote:
>
> Hello Paul,
>
> You would add these to you AuthBy RADMIN claause:
>
> # The following is a
Hi Mike,
Attached is my radius.cfg file with secrets removed, could you let me know
where to add in the AuthSelect and AuthColumDef lines.
Regards. Paul
Mike McCauley wrote:
>
> On Dec 15, 6:18am, Paul Black wrote:
> > Subject: Re: (RADIATOR) MAX IDLE TIME
> > My Tigris
Is it possible to implement a startuphook in a future Radiator version ?
This should only be called once at startup . I would use it to set the umask so
all logfiles get their write permissions stripped.
TIA
Paul
--
Paul van der Zwan paulz @ trantor.xs4all.nl
"I
;2>_<230>"
This looks like it is an 8 byte value printed by printing non-ascii chars as
. I was wondering if that is the way the nortels send it or is it done
inside Radiator ??
To get fixed length fields in the database I'd rather have it printed as a 16
char long hex string, can
My Tigris was using the Idle-Timeout attribute in the users file correctly
before I started using radmin. Could you please give me some more hints on how
to set the Idle-Timeout attribute (from the database field) in the reply?
Mike McCauley wrote:
>> What I need to know is how to tell Radiator
is how to tell Radiator to use the MAXIDLETIME value in
the Radiator MySQL database? I'm sure this problem has been solved a few times
by other people.
Regards. Paul
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscrib
,
Paul Thornton.
,- __ -, DOVE AUSTRALIA SYSADMIN TEAM
/ \___/ /__ _ _/ \
/ _ / _ / _ \ |/ / -_) _ \ Account queries: [EMAIL PROTECTED]
/.- \_,_/\___/___/\__/-.\ Tech Support: [EMAIL PROTECTED]
A U S T R A L I A Sales queries
e the field "Framed-IP-Address = 203.15.24.99"
how do we reject the IP-Address from this, so that the routing doesn't go
up the creek!
Cheers,
Paul Thornton.
,- __ -, DOVE AUSTRALIA SYSADMIN TEAM
/ \___/ /__ _ _/ \
/ _ / _ / _ \ |/ / -_) _
shown and disconnecting them.
testuser Auth-Type = "Reject:Not enough Credit in your account"
_ _
Could you please tell me why o o
|
\_/
Regards,
Paul Thornton.
,- __ -,
I seem to have sorted the problem out now. There is a handy mysql program
called isamchk which allowed me to check each of the tables, sure enough a
couple of them had corrupted pointers. Used the repair option and now Radiator
seems to be working ok again.
Regards. Paul
Hugh Irvine wrote
in the Session Database.
Could anyone tell me which table(s) to deleted and how to recreate it again?
Regards. Paul
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
Netscape disagrees.
Radiator and SDS are still fast enough but reconnecting for every authentication
adds overhead we could do without.
TIA
Paul
--
Paul van der Zwan paulz @ trantor.xs4all.nl
"I think I'll move to theory, everything works in theory..."
===
uggestions on how to sort this out would be appreciated.
Regards. Paul
[root@iggy Radiator-2.14.1]# netstat -a
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp0 0 iggy.triode.net.au:smt
In message <[EMAIL PROTECTED]>, "Mike McCauley" wrote:
>On Sep 29, 2:08pm, Paul van der Zwan wrote:
>> Subject: (RADIATOR) Unsecure permissions on logfiles
>>
>> I am running radiator 2.14 on Solaris 2.6. It is started from /etc/inittab
>and
>&
1 - 100 of 164 matches
Mail list logo
