2024-08-28 15:10, Mario Marietto wrote:
Hello.
maybe I did some progress using these parameters :
console:/ #
[7.812969] init: Service 'recovery' (pid 106) received signal 11
[7.813381] init: Sending signal 9 to service 'recovery' (pid 106)
process group...
You go a shell prompt (
2023-12-12 22:10, Sbob rašė:
Can someone point me to the right way to convert VMWare Workstation VM's to
Qemu/KVM/libvirt VM's
Then I took these steps:
1) use qemu-img convert to convert the Dev-Fedora.vmdk file:
# qemu-img convert -f vmdk -O qcow2 Dev-Fedora.vmdk Dev-Fedora.qcow2
this crea
2021-11-11 14:51, Sukreet pal rašė:
I have a armv7 processor virtualized with qemu and busybox. I am unable to
use the wget command to
download anything. I have searched endless possible solution but did not
found any good solution.
It is not a question for this list. Please ask in some busyb
2021-09-22 14:26, Sukreet pal rašė:
I have a arm v7 processor which I am emulating in qemu and I have made a
root file system with
busybox - 1.33.1.
I am unable to use wget command to download anything on my virtual board but
I can ping to any
addresses (8.8.8.8)
I am getting this error -
Most probably somewhere at https://wiki.autosar.org/
2021-07-14 15:26, Evan Meyer via rašė:
Attached are the lines of code that could be of use before running the code,
I then would run
runqemu qemux86 core-image-apd-devel nographic
qemuparams="-net socket,mcast=MailScanner warning: numerical
2021-04-30 14:22, c...@etri.re.kr wrote:
Hi, list members,
Trying to install ubuntu on a virtual machine, I found this page :
https://futurewei-cloud.github.io/ARM-Datacenter/qemu/how-to-launch-aarch64-vm/
But I can't install qemu-efi-aarch64 package on ubuntu 16.04. (I was to
upgrade my ubunt
2021-04-09 18:05, Jagannadha Bhamidipati rašė:
I have raspberry pi 400
Installed OS - Ubuntu (Release 20.10 (Groovy Gorilla) 64-bit) Mate (MATE
1.24.1)
Kernel Linux - Kernel Linux 5.8.0-1019-raspi aarch64
I am trying to install skype for linux version on the above for video call
purpose. H
It is a virt-manager (libvirt), not qemu question, please ask in the correct
list.
2020-07-06 15:09, ToddAndMargo rašė:
Hi All,
Fedora 32, x64
qemu-kvm-4.2.0-7.fc32.x86_64
Since I have figure out how to run virt-manager as a
user without having to hassle with the pol kit prompt,
I would like
2019-09-05 14:10, Shlomo Pongratz rašė:
I've added the GONFIG_GPIO_PL061 (isn't it emulated on realview only?)
and CONFIG_KEYBOARD_GPIO and also added The CONFIG_POWER_RESET_GPIO.
But the QEMU still doesn't exit after halt -f.
Don't you need to use -p as well?
Please try kpartx -a /dev/nbd0
2018-11-29 12:38, ramakanth varala rašė:
thanks for the reply ..
But i get below error when i do ..
[root@localhost ~]# partx -a /dev/nbd0
HDIO_GETGEO: Inappropriate ioctl for device
On Thu, Nov 29, 2018 at 4:04 PM Nerijus Baliūnas <
n
2018-11-29 12:10, ramakanth varala rašė:
[root@localhost ~]# mount /dev/nbd0p1 /home/test.1.3.debug/mnt/boot
mount: special device /dev/nbd0p1 does not exist
partx -a /dev/nbd0
2018-07-31 13:35, utdilya rašė:
Thank you.
This is solution not working for me. Maybe, because of Centos7.
I have in the log:
3707 : host doesn't support hyperv 'relaxed' feature
3707 : host doesn't support hyperv 'vapic' feature
3707 : host doesn't support hyperv 'spinlocks' feature
/usr/libexe
2018-05-11 12:29, Mahmood Naderan rašė:
Hi
How can I find why kvm is busy and who is using that? Although I have
installed virtualbox, I want
to use qemu too.
qemu-system-x86_64: failed to initialize KVM: Device or resource busy
[mahmood@rocks7 ~]$ lsmod | grep kvm
kvm_amd698
2017-10-25 17:27, Pierre Couderc rašė:
#modprobe nbd max_part=8
#qemu-nbd -c /dev/nbd0 /home/nous/qemu/xp/XPVM.qcow2
#mount /dev/nbd0p1 /media/a
mount: special device /dev/nbd0p1 does not exist
partx -a /dev/nbd0
Virtual machine manager is part of libvirt (virt-manager), not Qemu.
2017-09-19 18:45, Gary Roach rašė:
And what might that helper software be? The virtual machine manager window
seems to be
malfunctioning and it is part of qemu. With that, the main problem is still
the wonky cursor.
Gary R.
2017-07-12 00:59, Sam Varshavchik rašė:
FWIW, here's my VM config from libvirt:
Offtopic - I'd suggest using virtio instead of IDE disks with
drivers from
https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/
2017-01-16 19:24, Mahmood Naderan rašė:
Hi,
A windows xp (x64) shows the network connection with the following command
-devive e1000,netdev=host_files -netdev
user,net=10.0.2.0/24,id=host_files,restrict=off,smb=/home/mahmood,smbserver=10.0.2.4
[1]
However, with the same command, a windows xp
Could you please do not top post? It makes very difficult to reply
normally.
Yes, the solution has typos - hiinterrupt.inf and bidinterrupt.inf
should be hidinterrupt.inf.
I did exactly what solution says and that got rid of device with
exclamation mark.
2017-01-05 14:00, Xi Shen rašė:
Hi Nerij
Thank you
Mark
-邮件原件-
发件人: Qemu-discuss
[mailto:qemu-discuss-bounces+lifuqiong=cncloudsec@nongnu.org] 代表 Nerijus
Baliūnas
发送时间: 2016年8月19日 15:49
收件人: qemu-discuss@nongnu.org
主题: Re: [Qemu-discuss] Is there any spec file to make qemu rpm
2016-08-19 09:33, lifuqiong rašė:
2016-08-19 09:33, lifuqiong rašė:
I found there is no spec file in qemu, where can I find the spec
file and build a rpm file?
In Fedora or CentOS src.rpm package.
2016-08-17 19:46, Laurentiu Soica rašė:
The baremetal and compute are both running CentOS 7 and on the
baremetal I've enabled nested KVM feature.
Kernel is 3.10.0-327.22.2.el7.x86_64
qemu-kvm is 1.5.3-105.el7_2.7
It is quite old. I would use a newer one, for example, qemu-kvm-ev
from
https://l
2016-08-16 21:49, Peter Maydell rašė:
It is nvidia binary driver. Running LD_PRELOAD=/usr/lib64/libGL.so.1
Is there something that can be done/workarounded in qemu or should I just
patch libvirtd systemd unit file to include
LD_PRELOAD=/usr/lib64/libGL.so.1?
QEMU's just doing fork() and fork
2016-08-16 21:21, Nerijus Baliūnas rašė:
I've tried gdb without daemonize on a working PC and got the same
backtrace. So it seems it is daemonize code which has a problem.
Debugging the child revealed the problem:
# gdb /usr/bin/qemu-system-alpha
(gdb) set follow-fork-mode child
(gdb) r -
2016-08-16 20:58, Nerijus Baliūnas rašė:
Does the same binary work on one PC and not on the other?
(not just the same command).
Yes, both OS (Fedora 24) and binaries are identical. On one
PC it works, on another - does not.
I've tried gdb without daemonize on a working PC and got the
2016-08-16 20:53, Peter Maydell rašė:
Has it actually hung, or is it just waiting for you to talk
QMP protocol to it on the socket ?
Probably hung, because the same command launches on another PC,
process is running and the shell returns.
Even with -daemonize not supplied? It shouldn't return
2016-08-16 20:26, Peter Maydell rašė:
Yes, it still hangs:
# gdb /usr/bin/qemu-system-alpha
(gdb) r -S -no-user-config -nodefaults -nographic -M none -qmp
unix:/var/lib/libvirt/qemu/capabilities.monitor.sock,server,nowait -pidfile
/var/lib/libvirt/qemu/capabilities.pidfile
Starting program: /usr
2016-08-16 19:58, Peter Maydell rašė:
This is the outer process waiting for the child process to tell
it it's got started in os_daemonize().
Does QEMU still hang if you don't pass it -daemonize ? If so,
then it will be easier to debug that.
Yes, it still hangs:
# gdb /usr/bin/qemu-system-alph
__fd=)
at /usr/include/bits/unistd.h:44
#2 0x557d63d3 in os_daemonize () at
/usr/src/debug/qemu-2.7.0-rc2/os-posix.c:224
#3 0x5573ac9e in main (argc=, argv=,
envp=)
at /usr/src/debug/qemu-2.7.0-rc2/vl.c:3989
2016-08-16 12:45, Nerijus Baliūnas rašė:
Hello,
qemu 2.7.0-0
Hello,
qemu 2.7.0-0.1.rc2.fc24, but the same happened with 2.6.0.
I start systemctl start libvirtd, and systemctl status libvirtd
shows:
Active: active (running) since Pr 2016-08-15 22:41:43 EEST; 30s ago
CGroup: /system.slice/libvirtd.service
├─2907 /usr/sbin/libvirtd
29 matches
Mail list logo
