Michael, want to pick this up for -trivial?
Reviewed-by: Paolo Bonzini
Il 27/09/2013 03:25, Amos Kong ha scritto:
> Touched some error after enabling DEBUG_SUBPAGE.
>
> Signed-off-by: Amos Kong
> ---
> exec.c | 18 +-
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff
26.09.2013 23:38, Stefan Weil пишет:
Am 25.09.2013 14:57, schrieb Michael Roth:
Hi everyone,
The following new patches are queued for QEMU stable v1.6.1:
https://github.com/mdroth/qemu/commits/stable-1.6-staging
The release is planned for 2013-10-02:
http://wiki.qemu.org/Planning/1.6
Please
On 09/19/2013 12:45 PM, Alexey Kardashevskiy wrote:
> This adds QEMU wrappers for KVM_SET_ONE_REG/KVM_GET_ONE_REG ioctls.
Ping?
>
> Signed-off-by: Alexey Kardashevskiy
> ---
> Changes:
> v3:
> * changed comments
>
> v2:
> * added Doc Comments
> * removed error_print
> ---
> include/sysemu/kv
IBM POWERPC processors encode PVR as a CPU family in higher 16 bits and
a CPU version in lower 16 bits. Since there is no significant change
in behavior between versions, there is no point to add every single CPU
version in QEMU's CPU list. Also, new CPU versions of already supported
CPU won't brea
To be able to boot on newer hardware that the software support,
PowerISA defines a logical PVR, one per every PowerISA specification
version from 2.04.
This adds the "compat" option which takes values 205 or 206 and forces
QEMU to boot the guest with a logical PVR (CPU_POWERPC_LOGICAL_2_05 or
CPU_
25.09.2013 16:57, Michael Roth wrote:
Hi everyone,
The following new patches are queued for QEMU stable v1.6.1:
https://github.com/mdroth/qemu/commits/stable-1.6-staging
It looks like at least some stuff from the series
http://thread.gmane.org/gmane.comp.emulators.qemu/234440
is also neede
On the real hardware, RTAS is called in real mode and therefore
top 4 bits of the address passed in the call are ignored.
So does the patch.
This converts h_rtas() to use existing rtas_ld() handlers.
This fixed rtas_ld()/rtas_st() to ignore top 4 bits.
Signed-off-by: Alexey Kardashevskiy
---
Ch
27.09.2013 12:07, Michael Tokarev пишет:
25.09.2013 16:57, Michael Roth wrote:
Hi everyone,
The following new patches are queued for QEMU stable v1.6.1:
https://github.com/mdroth/qemu/commits/stable-1.6-staging
It looks like at least some stuff from the series
http://thread.gmane.org/gman
christoffer.d...@linaro.org writes:
> Save and restore the ARM KVM VGIC state from the kernel. We rely on
>
> static const VMStateDescription vmstate_gic = {
> .name = "arm_gic",
> -.version_id = 6,
> -.minimum_version_id = 6,
> +.version_id = 7,
> +.minimum_version_id =
In expand_zero_clusters_in_l1, a new cluster is only allocated if it was
not already preallocated. On error, such preallocated clusters should
not be freed, but only the newly allocated ones.
Signed-off-by: Max Reitz
---
block/qcow2-cluster.c | 16 ++--
1 file changed, 10 insertions(
PAPR+ says that no "ibm,purr" tells the guest that H_PURR is not
supported. However some guests still try calling H_PURR on POWER7 unless
the property is present and equal to 0. This adds the property for CPUs
supporting the PURR special register.
Signed-off-by: Benjamin Herrenschmidt
Signed-off-
Il 25/09/2013 01:39, Peter Maydell ha scritto:
> On 25 September 2013 00:52, Paolo Bonzini wrote:
>> If -icount is enabled with multiprocessor guests, all CPUs increment
>> the same counter, which then basically runs too fast by a factor of
>> smp_cpus. This makes little sense and complicates fur
On Thu, 2013-09-26 at 13:06 +0200, Alexander Graf wrote:
> On 26.09.2013, at 08:37, Michael Ellerman wrote:
>
> > Some powerpc systems have support for a hardware random number generator
> > (hwrng). If such a hwrng is present the host kernel can provide access
> > to it via the H_RANDOM hcall.
>
Hi,
> >> #2 When using f19 try without X11 first. You should have a working
> >> framebuffer console on qxldrmfb before trying to get X11 going.
> >
> > I tried on Fedora19 minimal installation and with qxl the text console
> > is working and lsmod show also qxl.
Good, so the kernel drive
>>> On 9/27/2013 at 12:56 AM, in message <5244673f.4000...@redhat.com>, Paolo
Bonzini wrote:
> Il 26/09/2013 12:30, Chunyan Liu ha scritto:
> >
> >
> >
> > 2013/9/26 Paolo Bonzini mailto:pbonz...@redhat.com>>
> >
> > Il 26/09/2013 09:58, Stefan Hajnoczi ha scritto:
> > > On W
Il 27/09/2013 10:36, Michael Ellerman ha scritto:
> So have the host kernel read from the hwrng, export it to userspace via
> a char device, which is then read by qemu, which then copies it back
> into the host kernel, which can then give it to the guest.
>
> Or from the guest perspective, instead
Il 27/09/2013 10:02, Alexey Kardashevskiy ha scritto:
> On 09/19/2013 12:45 PM, Alexey Kardashevskiy wrote:
>> This adds QEMU wrappers for KVM_SET_ONE_REG/KVM_GET_ONE_REG ioctls.
>
> Ping?
>
>
>>
>> Signed-off-by: Alexey Kardashevskiy
>> ---
>> Changes:
>> v3:
>> * changed comments
>>
>> v2:
>>
Il 27/09/2013 10:58, Chun Yan Liu ha scritto:
>> If so, you could run QEMU with "cache=unsafe" and have
>> basically the same data safety guarantees as "cache=writeback" on
>> every other file system.
> "cache=unsafe" means it never calls fsync() ?
Yes. However, metadata writes are still done and
On 09/27/2013 06:59 PM, Paolo Bonzini wrote:
> Il 27/09/2013 10:02, Alexey Kardashevskiy ha scritto:
>> On 09/19/2013 12:45 PM, Alexey Kardashevskiy wrote:
>>> This adds QEMU wrappers for KVM_SET_ONE_REG/KVM_GET_ONE_REG ioctls.
>>
>> Ping?
>>
>>
>>>
>>> Signed-off-by: Alexey Kardashevskiy
>>> ---
On Fri, Sep 27, 2013 at 07:20:21AM +0200, Stefan Weil wrote:
> Am 11.09.2013 16:42, schrieb Stefan Hajnoczi:
> > The 'gthread' coroutine backend was written before the freelist (aka
> > pool) existed in qemu-coroutine.c.
> >
> > This means that every thread is expected to exit when its coroutine
>
Am 25.09.2013 um 14:12 hat Jeff Cody geschrieben:
> This adds the VHDX format to the qemu-iotests format, and adds
> a read test. The test reads from an existing sample image, that
> was created with Hyper-V under Windwos Server 2012.
>
> The image file is a 1GB dynamic image, with 32MB blocks.
>
Am 25.09.2013 um 14:12 hat Jeff Cody geschrieben:
> Changes in v3:
> One line in patch 3, for test 043: "$TEST_IMG".[123].base instead of
> "$TEST_IMG.[123].base". Thanks Stefan.
>
> Added Stefan's "Reviewed-by" to the patches.
>
> Changes in v2:
>
> Patch 1: MANIFEST file dropped.
Am 25.09.2013 um 12:07 hat Max Reitz geschrieben:
> The current version of the zero cluster expansion uses the guest disk
> size for determining the size of the expanded_clusters bitmap, however,
> it is addressed using host offsets. This leads to an assertion failing if
> the host image size excee
Am 25.09.2013 um 17:47 hat Max Reitz geschrieben:
> The function is not intended to be used on compressed clusters and will
> not work correctly, if used anyway, since L2E_OFFSET_MASK is not the
> right mask for determining the offset of compressed clusters. Therefore,
> assert that the first clust
Hi,
> ACPI gives a way to do this: supply PBlockLength = 0.
>
> I applied the following: though this means bytecode
> is not 1:1 identical to what we have with seabios,
> so I will keep it as a separate commit.
Sure.
Retested -- works fine now with both seabios + coreboot.
Glad to see this fi
Il 27/09/2013 11:08, Alexey Kardashevskiy ha scritto:
>> > Include it with the acked-by together with the first patch that needs
>> > it. Alex can pick it up.
>
> Why to wait?
>
> Alex, please pick it up.
>
> The first patch which needs it is "[PATCH] spapr: add "compat" machine
> option", post
Am 25.09.2013 um 16:37 hat Max Reitz geschrieben:
> Errors in l2_allocate should always go down the error path. If this path
> is taken, the newly allocated L2 cluster is abandoned and should thus be
> freed. The L2 table on the other hand should only be put back into the
> cache if it was taken fr
Am 27.09.2013 um 10:21 hat Max Reitz geschrieben:
> In expand_zero_clusters_in_l1, a new cluster is only allocated if it was
> not already preallocated. On error, such preallocated clusters should
> not be freed, but only the newly allocated ones.
>
> Signed-off-by: Max Reitz
Thanks, applied to
Am 26.09.2013 um 18:48 hat Jeff Cody geschrieben:
> On Thu, Sep 26, 2013 at 04:33:49PM +0200, Benoît Canet wrote:
> > This field is used by blkverify to disable external snapshots creation.
> > I will also be used by block filters like quorum to disable external
> > snapshots
> > creation.
> >
>
On 24/09/2013 16:09, Juan Quintela wrote:
Hi
Please, send any topic that you are interested in covering.
Last week I forgot to send the call for topics. We still have a topic there.
Thanks, Juan.
Agenda so far:
- Talk about qemu reverse executing (1st description was done this week)
How t
Am 26.09.2013 um 18:16 hat Benoît Canet geschrieben:
> > > +static void quorum_aio_bh(void *opaque)
> > > +{
> > > +QuorumAIOCB *acb = opaque;
> > > +BDRVQuorumState *s = acb->bqs;
> > > +int ret;
> > > +
> > > +ret = s->threshold <= acb->success_count ? 0 : -EIO;
> >
> > It would
Il 24/07/2012 09:49, christian schilling ha scritto:
> On Mon, Jul 23, 2012 at 6:28 PM, Stefan Weil wrote:
>> Am 23.07.2012 11:25, schrieb initcr...@gmail.com:
>>>
>>> A driver using simplified mode that works on real hardware
>>> did not work in qemu.
>>>
>>> Signed-off-by: Christian Schilling
>
Am 26.09.2013 um 18:29 hat Benoît Canet geschrieben:
> Le Friday 08 Feb 2013 à 11:38:38 (+0100), Kevin Wolf a écrit :
> > Am 28.01.2013 18:07, schrieb Benoît Canet:
> > > Signed-off-by: Benoit Canet
> > > ---
> > > block/quorum.c | 111
> > > +
Am 26.09.2013 um 18:46 hat Benoît Canet geschrieben:
> Le Friday 08 Feb 2013 à 13:07:03 (+0100), Kevin Wolf a écrit :
> > Am 28.01.2013 18:07, schrieb Benoît Canet:
> > > Use gnutls's SHA-256 to compare versions.
> > >
> > > Signed-off-by: Benoit Canet
> > > ---
> > > block/quorum.c | 303
> >
From: John Rigby
Also add the KVM_REG_ARM64 register type to linux/kvm header file.
Signed-off-by: John Rigby
Signed-off-by: Mian M. Hamayun
---
linux-headers/asm-arm64/kvm.h | 168 +
linux-headers/asm-arm64/kvm_para.h | 1 +
linux-headers/linux/kvm.
From: "Mian M. Hamayun"
This commit introduces a commandline argument to select the
AARCH64 or AARCH32 mode for processor initilization.
Signed-off-by: Mian M. Hamayun
---
qemu-options.hx | 8
target-arm/cpu.c | 9 +++--
vl.c | 4
3 files changed, 19 insertions(+
From: "Mian M. Hamayun"
This commit adds support for booting a single AArch64 CPU by setting
appropriate registers. The bootloader includes placehoders for Board-ID
that are used to implement uniform indexing across different bootloaders.
We also introduce Cortex-A57 to virt platform.
Signed-off
From: "Mian M. Hamayun"
This commit replaces the constant indices used in bootloaders, such as for
specifying the Board ID and kernel arguments with variable parameters.
This change is used as mechanism to minimize code changes for different
bootloaders, for example different bootloaders will be
From: "Mian M. Hamayun"
We enable SMP support for aarch64 processors using the PSCI method,
by setting the appropriate CPU feature flags at initilializtion time.
Secondary boot code for non-aarch64 processors is disabled in case
of compilation for aarch64.
Signed-off-by: Mian M. Hamayun
---
h
Compressed clusters can never be contiguous and count_contiguous_clusters
will not even work correctly for them. Therefore, those cluster should
always be treated as non-contiguous.
This series makes count_contiguous_clusters always stop at compressed
clusters and removes the corresponding flag fr
From: "Mian M. Hamayun"
Signed-off-by: Mian M. Hamayun
---
configure | 1 +
1 file changed, 1 insertion(+)
diff --git a/configure b/configure
index 7298b69..dbaf56f 100755
--- a/configure
+++ b/configure
@@ -4485,6 +4485,7 @@ case "$target_name" in
# Make sure the target and host cpus are
Compressed clusters can never be contiguous, therefore the corresponding
flag does not need to be given explicitly to count_contiguous_clusters.
Signed-off-by: Max Reitz
---
block/qcow2-cluster.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/block/qcow2-cluster.c b/bl
The function is not intended to be used on compressed clusters and will
not work correctly, if used anyway, since L2E_OFFSET_MASK is not the
right mask for determining the offset of compressed clusters. Therefore,
assert that the first cluster is not compressed and always include the
compression fl
From: "Mian M. Hamayun"
This commit adds the necessary flags and kernel load address to enable
booting of 32-bit guests on AArch64 processors.
The actual enable/disable mechanism is not included in this commit,
which should tweak the value of env->aarch64 variable for this purpose.
Signed-off-b
I'm sorry for replying this mail for so long.
I named the 'Cross-Platform KVM' fvm ('f'is the beginning of my name
:)).
The kernel module is based on kvm-kmod 3.4, and the qemu (version 1.1~1.6) can
be patched easily for fvm.
I named the kernel module vmmr0 (VMM in Ring0).
Not lik
From: "Mian M. Hamayun"
This is the v3 of patch series that implements KVM support in QEMU for the ARMv8
Cortex A57 CPU. It depends on the recently mainlined AArch64 preparation patch
series and machvirt patches version v7, and uses the already available KVM
in-kernel GIC support.
This implemen
From: John Rigby
Just an copy of a15 with a57 substituting a15 for now.
Signed-off-by: John Rigby
Signed-off-by: Mian M. Hamayun
---
hw/cpu/Makefile.objs | 1 +
hw/cpu/a57mpcore.c | 122 +++
target-arm/cpu.c | 9
3 files changed,
From: "Mian M. Hamayun"
This commit separates the 32-bit (ARMv7) specific KVM hooks from
the common code. It also adds the stub functions for 64-bit (ARMv8).
The makefile objects are also tweaked accordingly to compile code
either of ARMv7 or ARMv8 depending on the AARCH64 variable.
Signed-off-
On 27.09.2013, at 04:30, Peter Maydell wrote:
> On 27 September 2013 10:02, Alexander Graf wrote:
>> On 27.09.2013, at 02:47, Alexander Graf wrote:
>>> This is the first batch of patches to implement AArch64 instruction
>>> emulation in QEMU. It implements enough to execute simple AArch64
>>> pr
On Thu, Sep 26, 2013 at 02:53:54PM +0200, Thomas Knauth wrote:
> As far as I understand the dirty logging infrastructure will only
> record writes. I want to track reads as well.
>
> A better way to express what I would like to do is trace all guest
> physical addresses that are accessed. Again, I
From: "Mian M. Hamayun"
The cpu init function tries to initialize with all possible cpu types, as
KVM does not provide a means to detect the real cpu type and simply refuses
to initialize on cpu type mis-match. By using the loop based init function,
we avoid the need to modify code if the underly
From: "Mian M. Hamayun"
Introduce the A57 cpu to the default AArch64 configuration and enable KVM for
64-bit guests only.
Signed-off-by: Mian M. Hamayun
---
configure | 2 +-
default-configs/aarch64-softmmu.mak | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
d
On Thu, Sep 26, 2013 at 07:20:31PM +0200, Roger Pau Monné wrote:
> On 26/09/13 18:46, Anthony PERARD wrote:
> > On Wed, Sep 18, 2013 at 09:50:58PM +0200, Roger Pau Monne wrote:
> >> Qemu has several hardcoded xenstore paths that are only valid on Dom0.
> >> Attempts to launch a Qemu instance (to ac
On Fri, Sep 27, 2013 at 04:30:51AM +0200, Ákos Kovács wrote:
> diff --git a/hw/net/Kconfig b/hw/net/Kconfig
> new file mode 100644
> index 000..19ca549
> --- /dev/null
> +++ b/hw/net/Kconfig
This should be a separate patch.
> @@ -0,0 +1,74 @@
> +menu "Network devices"
> +config DP8393X
>
On Fri, Sep 27, 2013 at 04:30:54AM +0200, Ákos Kovács wrote:
> Signed-off-by: Ákos Kovács
> ---
> hw/isa/Kconfig | 39 +++
> 1 file changed, 39 insertions(+)
> create mode 100644 hw/isa/Kconfig
>
> diff --git a/hw/isa/Kconfig b/hw/isa/Kconfig
> new file mode
On Fri, Sep 27, 2013 at 04:30:43AM +0200, Ákos Kovács wrote:
> Signed-off-by: Ákos Kovács
> ---
> hw/block/Kconfig | 31 +++
> 1 file changed, 31 insertions(+)
> create mode 100644 hw/block/Kconfig
>
> diff --git a/hw/block/Kconfig b/hw/block/Kconfig
> new file mode
Il 27/09/2013 13:14, Stefan Hajnoczi ha scritto:
> On Fri, Sep 27, 2013 at 04:30:43AM +0200, Ákos Kovács wrote:
>> Signed-off-by: Ákos Kovács
>> ---
>> hw/block/Kconfig | 31 +++
>> 1 file changed, 31 insertions(+)
>> create mode 100644 hw/block/Kconfig
>>
>> diff --g
Il 27/09/2013 13:11, Stefan Hajnoczi ha scritto:
> On Fri, Sep 27, 2013 at 04:30:51AM +0200, Ákos Kovács wrote:
>> diff --git a/hw/net/Kconfig b/hw/net/Kconfig
>> new file mode 100644
>> index 000..19ca549
>> --- /dev/null
>> +++ b/hw/net/Kconfig
>
> This should be a separate patch.
>
>> @@ -
Il 27/09/2013 13:13, Stefan Hajnoczi ha scritto:
> On Fri, Sep 27, 2013 at 04:30:54AM +0200, Ákos Kovács wrote:
>> Signed-off-by: Ákos Kovács
>> ---
>> hw/isa/Kconfig | 39 +++
>> 1 file changed, 39 insertions(+)
>> create mode 100644 hw/isa/Kconfig
>>
>> diff
On Fri, Sep 27, 2013 at 11:14:55AM +0200, Kevin Wolf wrote:
> Am 25.09.2013 um 14:12 hat Jeff Cody geschrieben:
> > This adds the VHDX format to the qemu-iotests format, and adds
> > a read test. The test reads from an existing sample image, that
> > was created with Hyper-V under Windwos Server 2
Am 27.09.2013 um 12:14 hat Max Reitz geschrieben:
> Compressed clusters can never be contiguous and count_contiguous_clusters
> will not even work correctly for them. Therefore, those cluster should
> always be treated as non-contiguous.
>
> This series makes count_contiguous_clusters always stop
All callers pass start = 0, and it's doubtful if any other value would
actually do what you expect. Remove the parameter.
Signed-off-by: Kevin Wolf
---
block/qcow2-cluster.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-clust
From: Laurent Vivier
Signed-off-by: Laurent Vivier
Reviewed-by: Peter Maydell
Signed-off-by: Riku Voipio
---
linux-user/ioctls.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/linux-user/ioctls.h b/linux-user/ioctls.h
index 439c2a9..7381012 100644
--- a/linux-user/ioctls.h
+++ b/linux-us
From: Richard Henderson
It has been pointed out on LKML that the alpha umount syscall numbers
are named wrong, and a patch to rectify that has been posted for 3.11.
Glibc works around this by treating NR_umount as NR_umount2 if
NR_oldumount exists. That's more complicated than we need in QEMU,
From: Laurent Vivier
This is needed to be able to run dhclient.
Signed-off-by: Laurent Vivier
Reviewed-by: Peter Maydell
Signed-off-by: Riku Voipio
---
linux-user/syscall.c | 44
linux-user/syscall_defs.h | 12
2 files changed, 5
From: Richard Henderson
The name field of MIPS_SYS isn't actually used; it's just documentation.
But adjust the umount entries to match mips/syscall_nr.h anyway.
Signed-off-by: Richard Henderson
Signed-off-by: Riku Voipio
---
linux-user/main.c | 4 ++--
1 file changed, 2 insertions(+), 2 dele
From: Laurent Vivier
This patch allows to have IP addresses in correct order
in the case of "netstat -nr" when the endianess of the
guest differs from one of the host.
For instance, an m68k guest on an x86_64 host:
WITHOUT this patch:
$ netstat -nr
Kernel IP routing table
Destination Gatew
From: Riku Voipio
The following changes since commit f828a4c8faa118e0ebab3e353ac6840f3b2a0318:
Merge remote-tracking branch 'stefanha/tracing' into staging (2013-09-23
11:53:22 -0500)
are available in the git repository at:
git://git.linaro.org/people/rikuvoipio/qemu.git linux-user-for-up
From: Petar Jovanovic
Previous implementation does not take into account that SOL_SOCKET constant
can be arch specific. This change fixes some issues with sendmsg/recvmsg.
Signed-off-by: Petar Jovanovic
Reviewed-by: Peter Maydell
Signed-off-by: Riku Voipio
---
linux-user/syscall.c | 18 +
From: Laurent Vivier
The binfmt_misc module can calculate the credentials and security
token according to the binary instead of to the interpreter if the
'C' flag is enabled.
To be able to execute non-readable binaries, this flag implies 'O'
flag. When 'O' flag is enabled, bintfmt_misc opens the
From: Kwok Cheung Yeung
microMIPS instructions that cause breakpoint exceptions come in
16-bit and 32-bit variants. When handling exceptions caused by
such instructions, the instruction type needs to be taken into
account when extracting the break code.
The code has also been restructured for b
From: "Edgar E. Iglesias"
If the host lacks SOCK_CLOEXEC, bail out with -EINVAL.
If the host lacks SOCK_ONONBLOCK, try to emulate it with fcntl()
and O_NONBLOCK.
Signed-off-by: Edgar E. Iglesias
Signed-off-by: Riku Voipio
---
linux-user/syscall.c | 40 +---
From: Laurent Vivier
Signed-off-by: Laurent Vivier
Reviewed-by: Peter Maydell
Signed-off-by: Riku Voipio
---
linux-user/syscall.c | 20
1 file changed, 20 insertions(+)
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index 505031b..7a093ba 100644
--- a/linux-use
From: Riku Voipio
With nptl enabled, atomic_cmpxchg_32 and atomic_barrier
system calls are needed. This patch enabled really dummy
versions of the system calls, modeled after the m68k
kernel code.
With this patch I am able to execute m68k binaries
with qemu linux-user (busybox compiled for coldf
This adds the VHDX format to the qemu-iotests format, and adds
a read test. The test reads from an existing sample image, that
was created with Hyper-V under Windwos Server 2012.
The image file is a 1GB dynamic image, with 32MB blocks.
The pattern 0xa5 exists from 0MB-33MB (past a block size bou
This patch should be replaced, because of the vhdx r/o test
patch posted upstream:
[PATCH v4] block: qemu-iotests for vhdx, read sample dynamic image
This patch should be:
---
This removes the IMGFMT_GENERIC blocker for read-only, so existing
iotests run read/write tests for vhdx images crea
On Wed, Sep 25, 2013 at 05:03:03PM -0400, Jeff Cody wrote:
> This adds the VHDX format to the qemu-iotests format, and adds
> a read test. The test reads from an existing sample image, that
> was created with Hyper-V under Windwos Server 2012.
>
> The image file is a 1GB dynamic image, with 32MB
Il 27/09/2013 10:51, Gerd Hoffmann ha scritto:
Hi,
#2 When using f19 try without X11 first. You should have a working
framebuffer console on qxldrmfb before trying to get X11 going.
I tried on Fedora19 minimal installation and with qxl the text console
is working and lsmod show also q
On Fri, Sep 27, 2013 at 01:51:10PM +0200, Kevin Wolf wrote:
> All callers pass start = 0, and it's doubtful if any other value would
> actually do what you expect. Remove the parameter.
>
> Signed-off-by: Kevin Wolf
Reviewed-by: Jeff Cody
> ---
> block/qcow2-cluster.c | 12 ++--
> 1 f
On 09/26/2013 05:47 PM, Alexander Graf wrote:
> -DEF_HELPER_3(vfp_cmps, void, f32, f32, env)
> -DEF_HELPER_3(vfp_cmpd, void, f64, f64, env)
> -DEF_HELPER_3(vfp_cmpes, void, f32, f32, env)
> -DEF_HELPER_3(vfp_cmped, void, f64, f64, env)
> +DEF_HELPER_3(vfp_fpscr_cmps, void, f32, f32, env)
> +DEF_HEL
On 09/26/2013 05:47 PM, Alexander Graf wrote:
> While we don't have a working disassembler for AArch64 yet, we still
> don't want AArch64 code be disassembled through the old AArch32
> disassembler.
>
> So add a small disassembler stub that declares every instruction as
> unsupported. This should
On Thu, Sep 26, 2013 at 10:32:06PM +0200, Borislav Petkov wrote:
> On Thu, Sep 26, 2013 at 04:20:59PM -0300, Eduardo Habkost wrote:
> > Please point me to the code that does this, because I don't see it on
> > patch 6/6.
>
> @@ -1850,7 +1850,14 @@ static void filter_features_for_kvm(X86CPU *cpu)
>
Hi Alex,
On 09/27/13 02:48, Alexander Graf wrote:
> This adds handling for the b and bl instructions.
>
> Signed-off-by: Alexander Graf
> ---
> target-arm/translate-a64.c | 61
> ++
> 1 file changed, 61 insertions(+)
>
> diff --git a/target-arm/tran
On 09/26/2013 05:48 PM, Alexander Graf wrote:
> +static int get_bits(uint32_t inst, int start, int len)
> +{
> +return (inst >> start) & ((1 << len) - 1);
> +}
> +
> +static int get_sbits(uint32_t inst, int start, int len)
> +{
> +int r = get_bits(inst, start, len);
> +if (r & (1 << (le
On 09/26/2013 05:48 PM, Alexander Graf wrote:
> +static void handle_br(DisasContext *s, uint32_t insn)
> +{
> +int branch_type = get_bits(insn, 21, 2);
> +int source = get_bits(insn, 5, 5);
> +
> +switch (branch_type) {
> +case 0: /* JMP */
> +break;
> +case 1: /* CALL *
Am 25.09.2013 um 16:37 hat Max Reitz geschrieben:
> If an error occurs in l2_allocate, the allocated (but unused) L2 cluster
> should be freed.
>
> Signed-off-by: Max Reitz
> ---
> block/qcow2-cluster.c | 4
> 1 file changed, 4 insertions(+)
This needs an update of the reference output for
On Fri, Sep 27, 2013 at 03:09:55PM +0300, riku.voi...@linaro.org wrote:
> From: Riku Voipio
>
> The following changes since commit f828a4c8faa118e0ebab3e353ac6840f3b2a0318:
>
> Merge remote-tracking branch 'stefanha/tracing' into staging (2013-09-23
> 11:53:22 -0500)
>
> are available in the
Qemu has several hardcoded xenstore paths that are only valid on Dom0.
Attempts to launch a Qemu instance (to act as a userspace backend for
PV disks) will fail because Qemu is not able to access those paths
when running on a domain different than Dom0.
Instead make the xenstore paths relative to
The following changes since commit f828a4c8faa118e0ebab3e353ac6840f3b2a0318:
Merge remote-tracking branch 'stefanha/tracing' into staging (2013-09-23
11:53:22 -0500)
are available in the git repository at:
git://repo.or.cz/qemu/kevin.git for-anthony
for you to fetch changes up to 61653008
From: Fam Zheng
Providing backing.file.filename doesn't override backing file as expected:
$ x86_64-softmmu/qemu-system-x86_64 -drive \
file=/tmp/child.qcow2,backing.file.filename=/tmp/fake.qcow2
qemu-system-x86_64: -drive \
file=/tmp/child.qcow2,backing.file.filename=/t
From: Peter Lieven
if the call is invoked through bdrv_is_allocated the caller might
expect *pnum = 0 on error. however, a new implementation of
bdrv_get_block_status might only return a negative exit value on
error while keeping *pnum untouched.
Reviewed-by: Eric Blake
Signed-off-by: Peter Lie
From: Max Reitz
Test 052 uses qemu-io -s which will result in bdrv_open trying to create
a temporary snapshot file in /tmp. However, since O_DIRECT and tmpfs
do not work well together, disable this test for -nocache.
Signed-off-by: Max Reitz
Signed-off-by: Kevin Wolf
---
tests/qemu-iotests/05
From: Benoît Canet
Signed-off-by: Benoit Canet
Signed-off-by: Kevin Wolf
---
block.c | 23 ++-
include/qapi/qmp/qdict.h | 2 ++
qobject/qdict.c | 21 +
3 files changed, 25 insertions(+), 21 deletions(-)
diff --git a/block.c b/
From: Fam Zheng
Test that backing.file.filename option can be parsed and override the
backing file from image (backing file reflected with "info block").
Signed-off-by: Fam Zheng
Signed-off-by: Kevin Wolf
---
tests/qemu-iotests/051 | 17 -
tests/qemu-iotests/051.out | 11 +
From: Benoît Canet
Some drivers will have driver specifics options but no filename.
This new bool allow the block layer to treat them correctly.
The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and
not having .bdrv_open.
The first exception to this rule will be the quo
From: Peter Lieven
Reviewed-by: Eric Blake
Signed-off-by: Peter Lieven
Signed-off-by: Kevin Wolf
---
block.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block.c b/block.c
index 9b444b3..3366017 100644
--- a/block.c
+++ b/block.c
@@ -3169,7 +3169,7 @@ static int64_t cor
From: Max Reitz
When trying to update the refcounts for a snapshot, the return value of
update_refcount on a compressed cluster was pretty much ignored,
cancelling the update on error but returning 0. This is caused by an
inner "ret" variable shadowing the outer one (the latter is used in the
ret
From: Jeff Cody
The VHD footer and header structs (vhd_footer and vhd_dyndisk_header)
are on-disk structures for the image format, and as such should be
packed.
Go ahead and make these typedefs as well, with the preferred QEMU
naming convention, so that the packed attribute is used consistently
From: Fam Zheng
Signed-off-by: Fam Zheng
Signed-off-by: Kevin Wolf
---
tests/qemu-iotests/059 | 5 +
tests/qemu-iotests/059.out | 7 +++
2 files changed, 12 insertions(+)
diff --git a/tests/qemu-iotests/059 b/tests/qemu-iotests/059
index b03429d..d2b3f9e 100755
--- a/tests/qemu-io
From: Stefan Weil
The patch fixes a warning from gcc (Debian 4.6.3-14+rpi1) 4.6.3:
block/stream.c:141:22: error:
‘copy’ may be used uninitialized in this function [-Werror=uninitialized]
This is not a real bug - a better compiler would not complain.
Now 'copy' has always a defined value, so th
1 - 100 of 150 matches
Mail list logo
