On 07/03/2012 10:49 PM, Eric Blake wrote:
> On 07/03/2012 01:23 PM, Blue Swirl wrote:
>
>>> +
>>> +static inline int64_t round2pow2(int64_t value)
>
> round up or down?
>
>>> +{
>>> +while (!is_power_of_2(value)) {
>>> +value &= ~(1 << (ffs(value) - 1));
>>
>> ffs() only uses 'int',
On 07/03/2012 10:25 PM, Blue Swirl wrote:
> On Tue, Jul 3, 2012 at 1:52 PM, Orit Wasserman wrote:
>> Signed-off-by: Orit Wasserman
>> ---
>> arch_init.c | 33 +++--
>> 1 files changed, 27 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch_init.c b/arch_init.c
>>
On 07/03/2012 11:38 PM, Eric Blake wrote:
> On 07/03/2012 07:52 AM, Orit Wasserman wrote:
>> Signed-off-by: Orit Wasserman
>> ---
>> arch_init.c |7 ++-
>> 1 files changed, 6 insertions(+), 1 deletions(-)
>
> You failed to account for my v13 review that you missed a hunk in this
> patch
On 07/04/2012 12:32 AM, Eric Blake wrote:
> On 07/03/2012 07:52 AM, Orit Wasserman wrote:
>> Signed-off-by: Benoit Hudzia
>> Signed-off-by: Petter Svard
>> Signed-off-by: Aidan Shribman
>> Signed-off-by: Orit Wasserman
>
>> +int xbzrle_encode_buffer(uint8_t *old_buf, uint8_t *new_buf, int slen
Il 04/07/2012 07:52, Hannes Reinecke ha scritto:
>>> >> +const char *mfi_frame_desc[] = {
>> >
>> > Missing 'static'.
>> >
> If you insist ...
>
> [ .. ]
>
> Hey, cool. Just one issue.
>
> Paolo, can you fix it up in your tree or should I re-send the patch?
Neither. Send the fix to qemu-triv
Il 03/07/2012 21:09, Blue Swirl ha scritto:
>> > @@ -587,9 +588,17 @@ static int scsi_disk_emulate_inquiry(SCSIRequest
>> > *req, uint8_t *outbuf)
>> > outbuf[buflen++] = 0; // not officially assigned
>> > outbuf[buflen++] = 0; // reserved
>> > outbuf[buf
Il 04/07/2012 04:14, Wayne Xia ha scritto:
>
>> of the internal structure inside - be it raw, or qcow, or anything else.
>> So, if you specify the format of the device explicitly, by using
>> format=raw, only single connection will be made.
> thanks, that helped me. A bit more question: is there
Am 03.07.2012 19:03, schrieb Eric Blake:
2. drive_add file=/dev/fdset/1 -> qemu_open uses the first fd from the
set that has access flags matching the qemu_open action flags.
qemu_open increments refcount for this fd.
3. add-fd /dev/fdset/1 FDSET={M} -> qemu adds fd to set named
On 07/03/2012 10:06 PM, Blue Swirl wrote:
> On Mon, Jul 2, 2012 at 9:43 AM, Avi Kivity wrote:
>> On 07/02/2012 12:30 PM, Jan Kiszka wrote:
>>> On 2012-07-02 11:18, Michael S. Tsirkin wrote:
I've been thinking hard about Jan's patches for device
assignment. Basically while I thought it ma
Am 03.07.2012 20:21, schrieb Corey Bryant:
> On 07/03/2012 02:00 PM, Eric Blake wrote:
>> On 07/03/2012 11:46 AM, Corey Bryant wrote:
>>
>>>
>>> Yes, I think adding a +1 to the refcount for the monitor makes sense.
>>>
>>> I'm a bit unsure how to increment the refcount when a monitor reconnects
>>>
Il 04/07/2012 06:39, Alex Williamson ha scritto:
> We've currently got a bug in pci_unregister_device in the ordering of
> calling the driver exit function and unregistering io regions. In
> every driver memory regions are created in the init function and
> destroyed in the exit function. By call
Am 03.07.2012 20:40, schrieb Blue Swirl:
> On Sat, Jun 30, 2012 at 5:50 AM, Markus Armbruster wrote:
>> Blue Swirl writes:
>>
>>> On Fri, Jun 29, 2012 at 3:34 PM, Markus Armbruster
>>> wrote:
Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into bloc
On 07/03/2012 10:45 PM, Eric Blake wrote:
> On 07/03/2012 07:52 AM, Orit Wasserman wrote:
>> Signed-off-by: Orit Wasserman
>> ---
>> docs/xbzrle.txt | 133
>> +++
>> 1 files changed, 133 insertions(+), 0 deletions(-)
>> create mode 100644 doc
Am 03.07.2012 21:19, schrieb Blue Swirl:
> On Tue, Jul 3, 2012 at 10:07 AM, Kevin Wolf wrote:
>> Am 09.06.2012 14:12, schrieb Blue Swirl:
>>> Move logging functions from exec.c to qemu-log.c,
>>> compile it only once.
>>>
>>> Signed-off-by: Blue Swirl
>>
>> This broke the TARGET_I386 specific log
Am 04.07.2012 02:25, schrieb Peter Crosthwaite:
> On Tue, Jul 3, 2012 at 11:15 PM, Kevin Wolf wrote:
>> Am 27.06.2012 00:26, schrieb MORITA Kazutaka:
>>> This removes blocking network I/Os in coroutine context.
>>>
>>> Signed-off-by: MORITA Kazutaka
>>> ---
>>> block/sheepdog.c | 10 --
On 04.07.2012, at 03:29, Jason Baron wrote:
> On Tue, Jul 03, 2012 at 10:54:37PM +0200, Alexander Graf wrote:
>> On 03.07.2012, at 22:37, Jason Baron wrote:
>>
>>> On Tue, Jul 03, 2012 at 08:52:50PM +0200, Alexander Graf wrote:
On 03.07.2012, at 20:46, Jason Baron wrote:
> On Tue,
From: Wanpeng Li
Since function pc_vga_init doesn't need to return DeviceState any more,
just cleanup.
Signed-off-by: Wanpneg Li
---
hw/pc.c | 18 +++---
hw/pc.h |2 +-
2 files changed, 8 insertions(+), 12 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index c7e9ab3..f387448
After rewrite DSKCHG bit handling the test has to be updated. Now
is needed to seek to different track to clear DSKCHG bit.
Signed-off-by: Pavel Hrdina
---
tests/fdc-test.c | 30 ++
1 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/tests/fdc-test.c b/t
Calling sense interrupt status while there is no interrupt should
return invalid command (0x80).
Read command should always returns in st0 seek_end bit set to 1.
Signed-off-by: Pavel Hrdina
---
tests/fdc-test.c | 25 -
1 files changed, 24 insertions(+), 1 deletions(-)
On 06/08/2012 03:04 PM, Andreas Färber wrote:
Am 08.06.2012 14:52, schrieb Jan Kiszka:
On 2012-06-08 14:47, Igor Mammedov wrote:
- Original Message -
From: "Jan Kiszka"
To: "Andreas Färber"
Cc: "Igor Mammedov" , "Anthony Liguori" ,
qemu-devel@nongnu.org, "Igor
Mammedov" , "Paolo Bon
Add using of functionality provided by CMU - get_rate and
register_clock_handler.
Signed-off-by: Maksim Kozlov
---
hw/exynos4210_uart.c | 48 +++-
1 files changed, 47 insertions(+), 1 deletions(-)
diff --git a/hw/exynos4210_uart.c b/hw/exynos4210_u
Changelog:
v2->v3:
- hw/exynos4210_cmu.c: debug output was disabled by default
v1->v2:
- hw/exynos4210_cmu.c: the 'const' qualifier was added to
global structures and arrays which shouldn't be changed
in runtime. Also, useless type casts were deleted.
- hw/exynos4210_ua
Add exynos4210 Clock Management Units emulation
Signed-off-by: Maksim Kozlov
---
hw/arm/Makefile.objs |1 +
hw/exynos4210.c | 16 +
hw/exynos4210.h | 42 ++
hw/exynos4210_cmu.c | 1464 ++
4 files changed, 1523 insertions(+), 0 de
Am 06.06.2012 08:10, schrieb Paolo Bonzini:
> Hi,
>
> these patches are prerequisites for testing streaming error handling.
> They should be useful on their own, so I am sending them early to keep
> the queue small.
>
> Paolo Bonzini (6):
> blkdebug: remove sync i/o events
> blkdebug: tiny cl
On 28 June 2012 15:35, Peter Maydell wrote:
> It's possible that making target_phys_addr_t 64 bits for
> all ARM cores might be a slight slowdown (though only in
> system mode, and not in the fast path of a TLB hit for a
> RAM access). Benchmarking this is on my todo list, but I wanted
> to put th
Am 03.07.2012 21:45, schrieb Michael Tokarev:
> On 03.07.2012 15:05, xiaw...@linux.vnet.ibm.com wrote:
>> From: Wenchao Xia
>>
>> Qemu system emulator reports only fails that make people confused
>> about why, when it is invoked with nbd block device tring to connect
>> qemu-nbd server. In fact
Suggested by blue swirl. Patch is on top of Paolo's
scsi-next tree.
Signed-off-by: Hannes Reinecke
Cc: Paolo Bonzini
Cc: Blue Swirl
---
hw/megasas.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/hw/megasas.c b/hw/megasas.c
index b48836f..b99fa97 100644
--- a/hw/mega
On 07/03/12 17:54, Marcelo Tosatti wrote:
On Wed, Jun 27, 2012 at 12:35:22PM +0200, Peter Lieven wrote:
Hi,
we recently came across multiple VMs racing and stopping working. It
seems to happen when the system is at 100% cpu.
One way to reproduce this is:
qemu-kvm-1.0.1 with vnc-thread enabled
Am 03.07.2012 17:07, schrieb Fabien Chouteau:
> On 07/03/2012 04:49 PM, Paolo Bonzini wrote:
>> Il 03/07/2012 16:00, Peter Maydell ha scritto:
>>> I was just talking on #qemu this morning about the equivalent question
>>> of whether the ARM semihosting exit function ought to be doing a
>>> qemu_sys
Add maintainers entry for megasas.
Patch is on top of Paolo's scsi-next tree.
Signed-off-by: Hannes Reinecke
Cc: Paolo Bonzini
---
MAINTAINERS |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 2a514fd..e67c84f 100644
--- a/MAINTAINERS
Am 03.07.2012 15:51, schrieb Paolo Bonzini:
> Il 03/07/2012 15:49, Kevin Wolf ha scritto:
>>> If the guest does not support flushes, we should run in writethrough mode.
The setting is temporary until the next reset, so that for example the
BIOS will run in writethrough mode while Linux wi
On 07/04/2012 12:07 PM, Kevin Wolf wrote:
> Am 03.07.2012 17:07, schrieb Fabien Chouteau:
>> On 07/03/2012 04:49 PM, Paolo Bonzini wrote:
>>> Il 03/07/2012 16:00, Peter Maydell ha scritto:
I was just talking on #qemu this morning about the equivalent question
of whether the ARM semihostin
Am 14.06.2012 16:55, schrieb Paolo Bonzini:
> +/*
> + * Add new bs contents at the top of an image chain while the chain is
> + * live, while keeping required fields on the top layer.
> + *
> + * This will modify the BlockDriverState fields, and swap contents
> + * between bs_new and bs_top. Both b
Am 04.07.2012 12:27, schrieb Fabien Chouteau:
> On 07/04/2012 12:07 PM, Kevin Wolf wrote:
>> Am 03.07.2012 17:07, schrieb Fabien Chouteau:
>>> On 07/03/2012 04:49 PM, Paolo Bonzini wrote:
Il 03/07/2012 16:00, Peter Maydell ha scritto:
> I was just talking on #qemu this morning about the eq
2012/7/4 Maksim Kozlov :
> Add exynos4210 Clock Management Units emulation
>
> Signed-off-by: Maksim Kozlov
> ---
> hw/arm/Makefile.objs |1 +
> hw/exynos4210.c | 16 +
> hw/exynos4210.h | 42 ++
> hw/exynos4210_cmu.c | 1464
> ++
On Mon, Jul 02, 2012 at 12:43:48PM +0300, Avi Kivity wrote:
> On 07/02/2012 12:30 PM, Jan Kiszka wrote:
> > On 2012-07-02 11:18, Michael S. Tsirkin wrote:
> >> I've been thinking hard about Jan's patches for device
> >> assignment. Basically while I thought it makes sense
> >> to make all devices:
On 07/04/2012 12:32 PM, Kevin Wolf wrote:
> Am 04.07.2012 12:27, schrieb Fabien Chouteau:
>> On 07/04/2012 12:07 PM, Kevin Wolf wrote:
>>> Am 03.07.2012 17:07, schrieb Fabien Chouteau:
On 07/03/2012 04:49 PM, Paolo Bonzini wrote:
> Il 03/07/2012 16:00, Peter Maydell ha scritto:
>> I wa
The goal is to make ctrl-a x to close Qemu in a clean way. The current
exit(0) skips a lot of cleanup/close functions, for example in block
drivers.
Signed-off-by: Fabien Chouteau
---
qemu-char.c |2 +-
sysemu.h|1 +
vl.c|5 +
3 files changed, 7 insertions(+), 1 delet
From: Evgeny Voevodin
START/STOP bit was not cleaned correctly.
Signed-off-by: Evgeny Voevodin
Reviewed-by: Peter Maydell
Signed-off-by: Peter Maydell
---
hw/exynos4210_pwm.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/hw/exynos4210_pwm.c b/hw/exynos4210_pwm.c
i
From: Stanislav Vorobiov
After some long period of time Linux kernel hanged due to
ptimer_get_count may return 0 before timer interrupt occurs,
thus, causing FRC to jump back in time
Signed-off-by: Evgeny Voevodin
Signed-off-by: Peter Maydell
---
hw/exynos4210_mct.c |4
1 files chang
On 07/04/2012 01:42 PM, Michael S. Tsirkin wrote:
> On Mon, Jul 02, 2012 at 12:43:48PM +0300, Avi Kivity wrote:
>> On 07/02/2012 12:30 PM, Jan Kiszka wrote:
>> > On 2012-07-02 11:18, Michael S. Tsirkin wrote:
>> >> I've been thinking hard about Jan's patches for device
>> >> assignment. Basically w
From: Evgeny Voevodin
We want to mirror whole IROM and should pass zero instead of
EXYNOS4210_IROM_BASE_ADDR (though it equals to zero too) since
memory_region_init_alias takes an offset within an original
region as an argument.
Signed-off-by: Evgeny Voevodin
Reviewed-by: Peter Maydell
Signed-
From: Peter Chubb
Board support for Kyoto Micro's KZM-ARM11-01, an evaluation board built
around the Freescale i.MX31.
Signed-off-by: Philip O'Sullivan
Signed-off-by: Peter Chubb
Signed-off-by: Peter Maydell
---
MAINTAINERS |6 ++
hw/arm/Makefile.objs |1 +
hw/kzm.c
On 07/03/2012 11:15 PM, Shrinidhi Joshi wrote:
> On Saturday 16 June 2012 03:41 AM, Eric Blake wrote:
>> On 06/15/2012 02:48 PM, Supriya Kannery wrote:
>> > raw-posix driver changes for bdrv_reopen_xx functions to
>> > safely reopen image files. Reopening of image files while
>> > changing hostcac
On 07/04/2012 01:24 AM, Orit Wasserman wrote:
>>
>>> +ret = uleb128_decode_small(src + i, &count);
>>> +if (ret < 0) {
>>
>> An nzrun should be a non-zero value; I'd write this as (ret <= 0) to
>> rule out an attempt to pass a zero-length nzrun.
> decode can only return -1 (invalid
From: Peter Chubb
For Linux to be able to work out how fast its clocks are going, so
that timer ticks come approximately at the right time, it needs to
be able to query the clock control module (CCM).
This is the start of a CCM implementation. It currently knows only about
the MCU, HSP and IPG
On (Sun) 01 Jul 2012 [23:06:36], Paul Brook wrote:
> > This series depends on my QOM -object series that I just posted.
> >
> > In Amit's thread on virtio-rng, danpb mentioned that we really ought to
> > have a proper RNG backend infrastructure and of course he's correct on
> > that.
> >
> > Now
From: Oleg Ogurtsov
Signed-off-by: Oleg Ogurtsov
Signed-off-by: Peter Maydell
---
hw/arm/Makefile.objs |1 +
hw/exynos4210.c |8 +
hw/exynos4210_rtc.c | 595 ++
3 files changed, 604 insertions(+), 0 deletions(-)
create mode 100644
Hi YeongKyoon,
Thanks for your work!
But maybe you need to thread your patches so that the parts appear as replies
to the cover letter. `git-send-email` shoule enable --thread by deafult. The
other thing is you might want to cc to Laurent ,
he said he would like to review your patch before. :
Usual arm-devs pullreq; this contains some minor exynos fixes
and the iMX31 model. Please pull.
thanks
-- PMM
The following changes since commit 71ea2e016131a9fcde6f1ffd3e0e34a64c21f593:
bsd-user: fix build (2012-06-28 20:28:36 +)
are available in the git repository at:
git://git.linar
From: Peter Chubb
Implement the Freescale i.MX31 advanced vectored interrupt controller, at least
to the extent it is used by Linux 3.x
Vectors are not implemented.
Signed-off-by: Philip O'Sullivan
Signed-off-by: Peter Chubb
Signed-off-by: Peter Maydell
---
hw/arm/Makefile.objs |2 +-
h
From: Peter Chubb
Implement the Freescale i.MX UART. This uart is used in a variety of
SoCs, including some by Motorola, as well as in the Freescale i.MX
series.
This patch gives only a `bare-bones' implementation, enough to run Linux
or OKL4, but that's about it.
Signed-off-by: Philip O'Sulli
Il 04/07/2012 12:16, Kevin Wolf ha scritto:
>> > Yes. It doesn't override cache=unsafe though.
> When the guest doesn't support flushes, cache=writeback is equivalent to
> cache=unsafe, so if you want the old behaviour back you can switch to
> cache=unsafe without additional risks.
>
> We don't h
From: Peter Chubb
Implement the timers on the Freescale i.MX31 SoC.
This is not a complete implementation, but gives enough for
Linux to boot and run. In particular external triggers, which are
not useful under QEMU, are not implemented.
Signed-off-by: Philip O'Sullivan
Signed-off-by: Peter Chu
Make the state fields rx_desc_addr and tx_desc_addr uint32_t;
this matches the VMStateDescription, and also conforms to how
hardware works: the registers don't magically become larger
if the device is attached to a CPU with a larger physical
address size. It also fixes a compile failure if the
targ
On Wednesday 20 June 2012 11:48 PM, Jeff Cody wrote:
On 06/15/2012 04:47 PM, Supriya Kannery wrote:
> New command "block_set_hostcache" added for dynamically changing
> host pagecache setting of a block device.
>
> Usage:
> block_set_hostcache
> = block device
> = on/off
>
> Example:
> (qemu
I have the exactly the same problem/behavior. You are not allone!
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/709584
Title:
Fullscreen mode splits screen over monitor boundaries on dual-monitor
On Saturday 16 June 2012 03:41 AM, Eric Blake wrote:
On 06/15/2012 02:48 PM, Supriya Kannery wrote:
> raw-posix driver changes for bdrv_reopen_xx functions to
> safely reopen image files. Reopening of image files while
> changing hostcache dynamically is handled here.
>
> Signed-off-by: Supriya
On 29 June 2012 21:38, Stefan Weil wrote:
> commit c4baa0503d9623f1ce891f525ccd140c598bc29a improved SSE table
> type safety which now raises compiler errors when latest QEMU was
> configured with --enable-debug.
>
> Fix this by splitting the SSE tables even further to separate
> helper functions
On Tue, Jul 03, 2012 at 10:39:20PM -0600, Alex Williamson wrote:
> We've currently got a bug in pci_unregister_device in the ordering of
> calling the driver exit function and unregistering io regions. In
> every driver memory regions are created in the init function and
> destroyed in the exit fu
Am 04.07.2012 14:21, schrieb Paolo Bonzini:
> Il 04/07/2012 12:16, Kevin Wolf ha scritto:
Yes. It doesn't override cache=unsafe though.
>> When the guest doesn't support flushes, cache=writeback is equivalent to
>> cache=unsafe, so if you want the old behaviour back you can switch to
>> cache
On 07/04/2012 03:20 AM, Eric Blake wrote:
> On 07/03/2012 03:39 PM, Eric Blake wrote:
>> On 07/03/2012 03:32 PM, Eric Blake wrote:
>>
+ret = uleb128_decode_small(src + i, &count);
+if (ret < 0) {
>>>
>>> An nzrun should be a non-zero value; I'd write this as (ret <= 0) to
On Wed, Jul 04, 2012 at 02:24:45PM +0300, Avi Kivity wrote:
> On 07/04/2012 01:42 PM, Michael S. Tsirkin wrote:
> > On Mon, Jul 02, 2012 at 12:43:48PM +0300, Avi Kivity wrote:
> >> On 07/02/2012 12:30 PM, Jan Kiszka wrote:
> >> > On 2012-07-02 11:18, Michael S. Tsirkin wrote:
> >> >> I've been thin
Il 04/07/2012 14:50, Kevin Wolf ha scritto:
> Before merging the patches (or actually this patch, I think patch 1 is
> fairly independent),
Yes, it is.
> I'd like to hear more opinions on whether we need
> the cache parameter split first
Ok, let's discuss it next week on the KVM/QEMU call. Gett
Let the text cursor blink at 5 Hz. No timer is used, instead we rely on
the fact that the display is updated periodically.
Signed-off-by: Jan Kiszka
---
Changes in v2:
- avoid full screen updates for cursor blinking
- convert cursor_blink_state to cursor_visible_phase
hw/vga.c | 14 +++
04.07.2012 14:38, Dunrong Huang пишет:
+void exynos4210_register_clock_handler(ClockChangeHandler *func,
+ Exynos4210Clock clock_id, void *opaque)
+{
+ClockChangeEntry *cce = g_malloc0(sizeof(ClockChangeEntry));
+Exynos4210ClockState *clock = exynos4
On 2 July 2012 18:28, Peter Maydell wrote:
> If you create a usb-storage device on the qemu command line
> and then try to delete it via the monitor, QEMU asserts:
>
> $ dd if=/dev/zero bs=4096 count=1024 of=usb.img
> $ ./i386-softmmu/qemu-system-i386 -clock unix -monitor stdio -usb
> -drive if=no
On 4 July 2012 14:45, Maksim Kozlov wrote:
> 04.07.2012 14:38, Dunrong Huang пишет:
>>> +PRINT_DEBUG("%s rate: %llu\n", pll->name, pll->rate);
>>
>> pll->rate is of type uint64_t incompatible with "%llu"
>
>
> Type uint64_t is included from /usr/include/stdint.h as
>
> typedef unsigned long lo
04.07.2012 17:54, Peter Maydell пишет:
On 4 July 2012 14:45, Maksim Kozlov wrote:
04.07.2012 14:38, Dunrong Huang пишет:
+PRINT_DEBUG("%s rate: %llu\n", pll->name, pll->rate);
pll->rate is of type uint64_t incompatible with "%llu"
Type uint64_t is included from /usr/include/stdint.h a
>
>>> +
>>> +static void exynos4210_cmu_set_pll(void *opaque, Exynos4210ClockState
>>> *pll)
>>> +{
>>> +Exynos4210CmuState *s = opaque;
>>> +Exynos4210ClockState *source;
>>> +target_phys_addr_t offset = pll->div_reg;
>>> +ClockChangeEntry *cce;
>>> +uint32_t pdiv, mdiv, sdiv,
Am 04.07.2012 16:26, schrieb Pavel Hrdina:
> After rewrite DSKCHG bit handling the test has to be updated. Now
> is needed to seek to different track to clear DSKCHG bit.
>
> Signed-off-by: Pavel Hrdina
> ---
> tests/fdc-test.c | 30 ++
> 1 files changed, 22 inserti
04.07.2012 18:14, Dunrong Huang пишет:
+
+static void exynos4210_cmu_set_pll(void *opaque, Exynos4210ClockState
*pll)
+{
+Exynos4210CmuState *s = opaque;
+Exynos4210ClockState *source;
+target_phys_addr_t offset = pll->div_reg;
+ClockChangeEntry *cce;
+uint32_t pdiv, mdiv, s
On 07/03/12 15:25, Avi Kivity wrote:
On 07/03/2012 04:15 PM, Peter Lieven wrote:
On 03.07.2012 15:13, Avi Kivity wrote:
On 07/03/2012 04:01 PM, Peter Lieven wrote:
Further output from my testing.
Working:
Linux 2.6.38 with included kvm module
Linux 3.0.0 with included kvm module
Not-Working:
Am 29.06.2012 22:33, schrieb Blue Swirl:
> On Fri, Jun 29, 2012 at 3:34 PM, Markus Armbruster wrote:
>> Unless parameter ":floppy:" is given, vvfat creates a virtual image
>> with DOS MBR defining a single partition which holds the FAT file
>> system. The size of the virtual image depends on the
Am 29.06.2012 17:34, schrieb Markus Armbruster:
> vvfat creates a virtual VFAT filesystem with a certain logical
> geometry that depends on its options. It sets the "geometry hint" to
> this geometry. It is the only block driver to do this.
>
> The geometry hint is about about *physical* geometr
At Tue, 03 Jul 2012 15:15:03 +0200,
Kevin Wolf wrote:
>
> Am 27.06.2012 00:26, schrieb MORITA Kazutaka:
> > This removes blocking network I/Os in coroutine context.
> >
> > Signed-off-by: MORITA Kazutaka
> > ---
> > block/sheepdog.c | 10 --
> > 1 files changed, 8 insertions(+), 2 del
Il 03/07/2012 22:15, Andreas Färber ha scritto:
>> >
>> > I'd also vote for %u. PRI*32 do not seem very useful compared to plain
>> > int versions.
> If it's not useful we should use unsigned int.
It just means that we're assuming 32-bit ints, which is a fact. The day
an IL32 platform appears th
Il 04/07/2012 17:23, Kevin Wolf ha scritto:
>> > optsLCHSdef. PCHS
>> >:floppy: 80, 2,36 5,16,63
>> > :32:floppy: 80, 2,36 5,16,63
>> > :16:floppy: 80, 2,36 5,16,63
>> > :12:floppy: 80, 2,18 2,16,63
>> >
>> > Silly thing to do for use with a hard
Add using of functionality provided by CMU - get_rate and
register_clock_handler.
Signed-off-by: Maksim Kozlov
---
hw/exynos4210_uart.c | 48 +++-
1 files changed, 47 insertions(+), 1 deletions(-)
diff --git a/hw/exynos4210_uart.c b/hw/exynos4210_u
These patches add exynos4210 Clock Management Unit emulation
and usage of it by exynos4210 UART
Changelog:
v3->v4:
- added missing 'break' statements and 'default' labels in the _read and
_write functions,
- 'return' calls in the _read were moved,
- useless 'return' was removed fro
On 07/04/2012 10:19 AM, Paolo Bonzini wrote:
> Il 03/07/2012 22:15, Andreas Färber ha scritto:
I'd also vote for %u. PRI*32 do not seem very useful compared to plain
int versions.
>> If it's not useful we should use unsigned int.
>
> It just means that we're assuming 32-bit ints, wh
There is already support for that in spice-server afaik, though I don't
remember the api or what commit, or if it's in a released version (well,
it's surely in 0.11.0, but that's unstable). Sorry about the lack of
details, I suggest you search spice-devel mailing list archive though. I
think libvir
This reduces some code duplication.
Signed-off-by: MORITA Kazutaka
---
block/sheepdog.c | 113 ++---
1 files changed, 47 insertions(+), 66 deletions(-)
diff --git a/block/sheepdog.c b/block/sheepdog.c
index 6e73efb..4958672 100644
--- a/block/she
Introduce type constants and cast macros.
Avoid accessing parent fields directly.
Signed-off-by: Andreas Färber
---
hw/unin_pci.c | 133 ++---
1 files changed, 70 insertions(+), 63 deletions(-)
diff --git a/hw/unin_pci.c b/hw/unin_pci.c
index
Introduce type constant. Introduce cast macro and drop dummy busdev
field used with FROM_SYSBUS() that would've broken SYS_BUS_DEVICE().
Avoid accessing parent fields directly.
Signed-off-by: Andreas Färber
---
hw/dec_pci.c | 21 +++--
hw/dec_pci.h |2 ++
2 files changed, 1
Introduce type constant and cast macro. Don't access DeviceState
indirectly through parent fields.
Signed-off-by: Andreas Färber
---
hw/alpha_typhoon.c | 16 ++--
1 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/hw/alpha_typhoon.c b/hw/alpha_typhoon.c
index cc63737..
On 2012-07-04 18:26, Stefan Weil wrote:
> Hi Jan,
>
> please see my comments below.
>
>
> Am 04.07.2012 15:40, schrieb Jan Kiszka:
>> Let the text cursor blink at 5 Hz. No timer is used, instead we rely on
>> the fact that the display is updated periodically.
>>
>> Signed-off-by: Jan Kiszka
>> -
From: Andreas Färber
The preceding commits fixed misuses of FROM_SYSBUS() that led people to
add a bogus busdev field. For qdev the field order was less relevant but
for QOM the PCIHostState field (including the SysBusDevice actually
initialized with a value) must be placed first within the state
Let the text cursor blink at 1.875 Hz, the original VGA cursor
frequency. No timer is used, instead we rely on the fact that the
display is updated periodically.
Signed-off-by: Jan Kiszka
---
Changes in v3:
- adjusted frequency to original value
- fixed semantic of VGA_TEXT_CURSOR_PERIOD_MS
Introduce type constant. Introduce cast macro to drop dummy busdev field
used with FROM_SYSBUS() that would've broken SYS_BUS_DEVICE().
Avoid accessing parent fields directly.
Drop no-op reset function.
Signed-off-by: Andreas Färber
---
hw/grackle_pci.c | 57 ++
Introduce type constant. Avoid accessing DeviceState or SysBusDevice
indirectly through PCIHostState field.
Drop global state by passing BonitoState as opaque and adding the IRQs
and a pointer to PCIBonitoState to its state.
Signed-off-by: Andreas Färber
---
hw/bonito.c | 146 +
Introduce type constant and cast macro. Avoid accessing parent fields
directly.
Signed-off-by: Andreas Färber
---
hw/ppce500_pci.c | 16 +++-
1 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/hw/ppce500_pci.c b/hw/ppce500_pci.c
index 99748b3..e4f065a 100644
--- a/hw/p
Hello Michael,
This series makes pci_host a proper QOM type, now using explicit
PCI_HOST_BRIDGE naming and splitting off cleanups grouped by device, so that
we can see where exactly the type introduction is making a change.
Only compile-tested were typhoon, bonito and ppc440.
Please review. I'm
Introduce type constant. Introduce cast macro to drop dummy busdev field
used with FROM_SYSBUS() macro that would've broken SYS_BUS_DEVICE().
Avoid accessing DeviceState indirectly through PCIHostState.
Signed-off-by: Andreas Färber
---
hw/gt64xxx.c | 35 ---
1
Introduce type constant. Introduce cast macro to drop bogus busdev field
that would've broken SYS_BUS_DEVICE().
Signed-off-by: Andreas Färber
Reviewed-by: Anthony Liguori
---
hw/spapr_pci.c |8
hw/spapr_pci.h |6 +-
2 files changed, 9 insertions(+), 5 deletions(-)
diff --g
Also give the sPAPR host bridge type registration functions a unique
name.
Signed-off-by: Andreas Färber
---
hw/alpha_typhoon.c |2 +-
hw/bonito.c|4 ++--
hw/dec_pci.c |6 +++---
hw/grackle_pci.c |4 ++--
hw/gt64xxx.c |4 ++--
hw/piix_pci.c |8 +
Introduce type constant and cast macro. Avoid accessing parent fields
directly.
Also add missing space and braces.
Signed-off-by: Andreas Färber
---
hw/prep_pci.c | 17 -
1 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/hw/prep_pci.c b/hw/prep_pci.c
index a8cdc2
Hi Jan,
please see my comments below.
Am 04.07.2012 15:40, schrieb Jan Kiszka:
Let the text cursor blink at 5 Hz. No timer is used, instead we rely on
the fact that the display is updated periodically.
Signed-off-by: Jan Kiszka
---
Changes in v2:
- avoid full screen updates for cursor blin
Uglify the parent field to enforce QOM-style access via casts.
Don't just typedef PCIHostState, either use it directly or embed it.
Signed-off-by: Andreas Färber
---
hw/alpha_typhoon.c |4 ++--
hw/dec_pci.c |2 +-
hw/grackle_pci.c |2 +-
hw/gt64xxx.c | 26
Some typedef'ed their state to PCIHostState. Use a proper struct,
and use PCIHostState and PCI_HOST_BRIDGE() where appropriate.
Signed-off-by: Andreas Färber
---
hw/alpha_typhoon.c |2 +-
hw/bonito.c| 22 +++---
hw/dec_pci.c |4 ++--
hw/grackle_pci.c |
1 - 100 of 123 matches
Mail list logo
