On Sat, Sep 24, 2011 at 12:19 AM, Kevin Wolf wrote:
> Am 08.09.2011 12:11, schrieb Zhi Yong Wu:
>> Note:
>> 1.) When bps/iops limits are specified to a small value such as 511
>> bytes/s, this VM will hang up. We are considering how to handle this senario.
>> 2.) When "dd" command is is
Hi Paolo,
I'm facing problems over latest qemu with our special guest OS that is
using the LSI controller. It hangs during boot now. This can be resolved
by reverting commit c7b488721d (scsi: report unit attention on reset).
I cannot exclude a bug in the guest driver at this point, but maybe you
After the removal of the non-threaded mode cpu_exec_all is now only used
by TCG. Refactor it accordingly, also dropping its unused return value.
Signed-off-by: Jan Kiszka
---
cpus.c | 14 +-
cpus.h |1 -
2 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/cpus.c b/c
This increases the overhead of frequently executed helpers.
Signed-off-by: Jan Kiszka
---
Maybe this should be applied to more hot-path functions, but I haven't
done any thorough analysis yet.
Makefile.target |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Makefile.ta
On 09/26/2011 09:27 AM, Jan Kiszka wrote:
Hi Paolo,
I'm facing problems over latest qemu with our special guest OS that is
using the LSI controller. It hangs during boot now. This can be resolved
by reverting commit c7b488721d (scsi: report unit attention on reset).
I cannot exclude a bug in th
Hello Jan,
Am 20.09.2011 um 18:53 schrieb Jan Kiszka:
> Using the error management of QemuMutex allows to simplify the code.
>
> CC: malc
> CC: Andreas Färber
> Signed-off-by: Jan Kiszka
> ---
> audio/coreaudio.c | 56 +++-
> 1 files changed, 8
On Fri, Sep 23, 2011 at 11:32 PM, Kevin Wolf wrote:
> Am 08.09.2011 12:11, schrieb Zhi Yong Wu:
>> Signed-off-by: Zhi Yong Wu
>> ---
>> Makefile.objs | 2 +-
>> block/blk-queue.c | 201
>> +
>> block/blk-queue.h | 59
Hi...
On Mon, Sep 26, 2011 at 14:46, Jan Kiszka wrote:
> This increases the overhead of frequently executed helpers.
>
> Signed-off-by: Jan Kiszka
IMHO, stack protector setup put more stuffs during epilogue, but quite
likely it is negligible unless it cause too much L1 cache misses. So,
I think
On 2011-09-26 09:58, Andreas Färber wrote:
> Hello Jan,
>
> Am 20.09.2011 um 18:53 schrieb Jan Kiszka:
>
>> Using the error management of QemuMutex allows to simplify the code.
>>
>> CC: malc
>> CC: Andreas Färber
>> Signed-off-by: Jan Kiszka
>> ---
>> audio/coreaudio.c | 56 +++-
Tried it, good tool to inspect guest memory layout.
It would be more nice if some symbol could be used to show
hierarchies.
-7ffe : pci
|__feba-febb : e1000-mmio
|__febf-febf0fff : cirrus-mmio
|__00fc00-fd
On Mon, Sep 26, 2011 at 10:01 AM, Mulyadi Santosa
wrote:
> Hi...
>
> On Mon, Sep 26, 2011 at 14:46, Jan Kiszka wrote:
>> This increases the overhead of frequently executed helpers.
>>
>> Signed-off-by: Jan Kiszka
>
> IMHO, stack protector setup put more stuffs during epilogue, but quite
> likely
On Tue, Sep 20, 2011 at 8:34 PM, Marcelo Tosatti wrote:
> On Mon, Sep 19, 2011 at 05:55:41PM +0800, Zhi Yong Wu wrote:
>> On Wed, Sep 14, 2011 at 6:50 PM, Marcelo Tosatti wrote:
>> > On Tue, Sep 13, 2011 at 11:09:46AM +0800, Zhi Yong Wu wrote:
>> >> On Fri, Sep 9, 2011 at 10:44 PM, Marcelo Tosatt
On Mon, Sep 26, 2011 at 12:23:21AM +0200, Lluís Vilanova wrote:
> 1) Cannot start QEMU with KVM when the device is enabled:
>kvm_set_phys_mem: error registering slot: Invalid argument
>
> 2) The driver never gets called on a read/write to its memory
If I add #include "pci.h" at the top of
On Mon, Sep 26, 2011 at 01:32:34PM +0800, Zhi Yong Wu wrote:
> On Fri, Sep 23, 2011 at 11:57 PM, Stefan Hajnoczi
> wrote:
> > Here is my generic image streaming branch, which aims to provide a way
> > to copy the contents of a backing file into an image file of a running
> > guest without requirin
On 09/25/2011 08:22 PM, Jan Kiszka wrote:
On 2011-09-25 16:07, Avi Kivity wrote:
> On 09/23/2011 12:31 PM, Lai Jiangshan wrote:
>> > Moreover: wrong indention.
>> >
>> > You know that this won't work for qemu-kvm with in-kernel irqchip? You
>> > may want to provide a patch for that tre
On Fri, Sep 09, 2011 at 08:11:54AM -0500, Stuart Yoder wrote:
> Based on the discussions over the last couple of weeks
> I have updated the device fd file layout proposal and
> tried to specify it a bit more formally.
>
> ===
>
> 1. Ove
On Mon, Sep 26, 2011 at 3:55 PM, Stefan Hajnoczi wrote:
> On Mon, Sep 26, 2011 at 01:32:34PM +0800, Zhi Yong Wu wrote:
>> On Fri, Sep 23, 2011 at 11:57 PM, Stefan Hajnoczi
>> wrote:
>> > Here is my generic image streaming branch, which aims to provide a way
>> > to copy the contents of a backing
On 2011-09-26 09:50, Paolo Bonzini wrote:
> On 09/26/2011 09:27 AM, Jan Kiszka wrote:
>> Hi Paolo,
>>
>> I'm facing problems over latest qemu with our special guest OS that is
>> using the LSI controller. It hangs during boot now. This can be resolved
>> by reverting commit c7b488721d (scsi: report
On Mon, Sep 26, 2011 at 05:11:00PM +0800, Zhi Yong Wu wrote:
> On Mon, Sep 26, 2011 at 3:55 PM, Stefan Hajnoczi wrote:
> > On Mon, Sep 26, 2011 at 01:32:34PM +0800, Zhi Yong Wu wrote:
> >> On Fri, Sep 23, 2011 at 11:57 PM, Stefan Hajnoczi
> >> wrote:
> >> > Here is my generic image streaming bran
Signed-off-by: Jan Kiszka
---
hw/lsi53c895a.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
index 75a03a7..e077ec0 100644
--- a/hw/lsi53c895a.c
+++ b/hw/lsi53c895a.c
@@ -697,7 +697,7 @@ static int lsi_queue_req(LSIState *s, SCSIRequest
Luiz Capitulino writes:
> On Fri, 23 Sep 2011 17:36:53 +0200
> Markus Armbruster wrote:
>
>> Luiz Capitulino writes:
>>
>> > On Fri, 23 Sep 2011 09:51:24 +0200
>> > Markus Armbruster wrote:
>> >
>> >> Luiz Capitulino writes:
>> >>
>> >> > This commit adds support to the BlockDriverState typ
Hi
Please send in any agenda items you are interested in covering.
Thanks, Juan.
On 09/25/2011 11:19 PM, Blue Swirl wrote:
Add a monitor command 'info mtree' to show the memory hierarchy
much like /proc/iomem in Linux.
diff --git a/memory.c b/memory.c
index ba74435..6b33fc4 100644
--- a/memory.c
+++ b/memory.c
@@ -17,6 +17,7 @@
#include "bitops.h"
#include "kvm.h"
#in
On 26 September 2011 07:22, Ray Wang wrote:
> diff --git a/hw/gt64xxx.c b/hw/gt64xxx.c
> index 1c34253..d0a31d2 100644
> --- a/hw/gt64xxx.c
> +++ b/hw/gt64xxx.c
> @@ -312,7 +312,7 @@ static void gt64120_writel (void *opaque,
> target_phys_addr_t addr,
> uint32_t saddr;
>
> if (!(s->regs[G
Juan Quintela wrote:
> Hi
I should learn to read the calendar
Call is for September 27th, of course.
Sorry for any inconvenience.
> Please send in any agenda items you are interested in covering.
>
> Thanks, Juan.
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
>
On 09/26/2011 11:23 AM, Jan Kiszka wrote:
scsi_req_parsed target 0 lun 0 tag 0 command 0 dir 0 length 0
scsi_req_parsed_lba target 0 lun 0 tag 0 command 0 lba 0
scsi_req_alloc target 0 lun 0 tag 0
scsi_test_unit_ready target 0 lun 0 tag 0
scsi_req_build_sense target 0 lun 0 tag 0 key 0x6 asc 0x29
Am 26.09.2011 um 09:51 schrieb David Gibson :
> On Fri, Sep 09, 2011 at 08:11:54AM -0500, Stuart Yoder wrote:
>> Based on the discussions over the last couple of weeks
>> I have updated the device fd file layout proposal and
>> tried to specify it a bit more formally.
>>
>> =
On 09/25/2011 08:31 PM, Blue Swirl wrote:
>
> Please point out a test case and I'll try to fix it.
Run qemu-system-ppc without any arguments. There is a black bar
(because of vga.chain4), it shouldn't be there.
With your pci hole patch, it's fixed, except for:
escc_mem = escc_init(0x8001
On 09/26/2011 01:08 PM, Avi Kivity wrote:
On 09/25/2011 08:31 PM, Blue Swirl wrote:
>
> Please point out a test case and I'll try to fix it.
Run qemu-system-ppc without any arguments. There is a black bar
(because of vga.chain4), it shouldn't be there.
With your pci hole patch, it's fixed, e
On 2011-09-26 11:49, Paolo Bonzini wrote:
> On 09/26/2011 11:23 AM, Jan Kiszka wrote:
>> scsi_req_parsed target 0 lun 0 tag 0 command 0 dir 0 length 0
>> scsi_req_parsed_lba target 0 lun 0 tag 0 command 0 lba 0
>> scsi_req_alloc target 0 lun 0 tag 0
>> scsi_test_unit_ready target 0 lun 0 tag 0
>> s
On Thu, Sep 22, 2011 at 07:08:47PM +0200, Paolo Bonzini wrote:
> Signed-off-by: Paolo Bonzini
> ---
> Makefile |9 +
> 1 files changed, 5 insertions(+), 4 deletions(-)
Thanks, applied to the trivial patches tree:
http://repo.or.cz/w/qemu/stefanha.git/shortlog/refs/heads/trivial-patch
On Mon, Sep 26, 2011 at 09:02:37AM +0400, Antony Pavlov wrote:
> The commit fc2bf44972349b078d8310466c3866615500e67f
> changed the type of val argument of the function gt64120_writel()
> from uint32_t to uint64_t, so we need to change the corresponding
> length modifier from "%x" to "%" PRIx64.
>
On Mon, Sep 26, 2011 at 11:30:49AM +0200, Jan Kiszka wrote:
> Signed-off-by: Jan Kiszka
> ---
> hw/lsi53c895a.c |2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
Thanks, applied to the trivial patches tree:
http://repo.or.cz/w/qemu/stefanha.git/shortlog/refs/heads/trivial-patches
St
Hi, Max
Sorry, I have to be sure what you talked about is guest or host.
Let me try.
> Well, my explanation sucks. Let's say it other way, more precisely:
> - you have two pieces of code in different pages, one of them jumps to the
> other;
guest code in different guest pages.
> - and you
This increases the overhead of frequently executed helpers. We need to
move rule past QEMU_CFLAGS assignment to ensure that the required simple
assignment picks up all bits. The signal workaround is moved just for
the sake of consistency.
Signed-off-by: Jan Kiszka
---
Changes in v2:
- unbreak q
On 09/26/2011 12:26 PM, Jan Kiszka wrote:
scsi_req_parsed target 0 lun 0 tag 0 command 0 dir 0 length 0
scsi_req_parsed_lba target 0 lun 0 tag 0 command 0 lba 0
scsi_req_alloc target 0 lun 0 tag 0
scsi_test_unit_ready target 0 lun 0 tag 0
scsi_req_build_sense target 0 lun 0 tag 0 key 0x6 asc
On 26 September 2011 11:51, Jan Kiszka wrote:
> This increases the overhead of frequently executed helpers. We need to
> move rule past QEMU_CFLAGS assignment to ensure that the required simple
> assignment picks up all bits. The signal workaround is moved just for
> the sake of consistency.
> +#
> Sorry, I have to be sure what you talked about is guest or host.
> Let me try.
>
>> Well, my explanation sucks. Let's say it other way, more precisely:
>> - you have two pieces of code in different pages, one of them jumps to the
>> other;
>
> guest code in different guest pages.
Right.
>> -
On 2011-09-26 13:33, Peter Maydell wrote:
> On 26 September 2011 11:51, Jan Kiszka wrote:
>> This increases the overhead of frequently executed helpers. We need to
>> move rule past QEMU_CFLAGS assignment to ensure that the required simple
>> assignment picks up all bits. The signal workaround is
Recent versions of udev always keep the tray locked so that the kernel
can observe "eject request" events (aka tray button presses). Add
support for such events in the ATAPI and SCSI cd drive device models.
The SCSI part depends on the twelve patches at
http://thread.gmane.org/gmane.comp.emu
On 26 September 2011 12:43, Jan Kiszka wrote:
> On 2011-09-26 13:33, Peter Maydell wrote:
>> On 26 September 2011 11:51, Jan Kiszka wrote:
>>> This increases the overhead of frequently executed helpers. We need to
>>> move rule past QEMU_CFLAGS assignment to ensure that the required simple
>>> as
On Fri, Sep 23, 2011 at 04:57:26PM +0100, Stefan Hajnoczi wrote:
> Here is my generic image streaming branch, which aims to provide a way
> to copy the contents of a backing file into an image file of a running
> guest without requiring specific support in the various block drivers
> (e.g. qcow2,
On Mon, 26 Sep 2011 11:34:34 +0200
Markus Armbruster wrote:
> Luiz Capitulino writes:
>
> > On Fri, 23 Sep 2011 17:36:53 +0200
> > Markus Armbruster wrote:
> >
> >> Luiz Capitulino writes:
> >>
> >> > On Fri, 23 Sep 2011 09:51:24 +0200
> >> > Markus Armbruster wrote:
> >> >
> >> >> Luiz Cap
Stefan Hajnoczi writes:
> On Mon, Sep 26, 2011 at 12:23:21AM +0200, Lluís Vilanova wrote:
>> 1) Cannot start QEMU with KVM when the device is enabled:
>> kvm_set_phys_mem: error registering slot: Invalid argument
>>
>> 2) The driver never gets called on a read/write to its memory
> If I add #inc
With the current patch queue I would like to start getting qemu-0.15.1
stable into shape. With this in mind, the plan is to tag the release on
Monday Oct 3rd. If you have patches pending for stable, now would be the
time to send them. Please CC jmfor...@linuxtx.org if you can to ensure that
I see
On 09/22/2011 11:26 AM, Riku Voipio wrote:
The following changes since commit 27cdad67a1bc23b38c765b677ed8064bfb8d3e44:
Revert "alpha-softmmu: Disable for the 0.15 release branch." (2011-09-21
00:50:32 +0200)
are available in the git repository at:
git://git.linaro.org/people/rikuvoipio/
On 09/23/2011 06:46 AM, Peter Maydell wrote:
This is a small pullreq for the couple of outstanding OMAP patches,
which I have now rebased following the landing of Avi's memoryregion
batch which touched omap1.c. I've also included the MAINTAINERS file
update. Please pull.
Thanks
-- PMM
Pulled.
On 09/25/2011 07:43 AM, Avi Kivity wrote:
Please pull from
git://github.com/avikivity/qemu.git memory/core
to receive an implementation of memory_region_set_readonly(). It has been tested
on i386 (440FX PAM) and Magnum.
Avi Kivity (1):
memory: implement memory_region_set_readonly()
Pulled.
On 09/25/2011 07:50 AM, Avi Kivity wrote:
Please pull from
git://github.com/avikivity/qemu.git memory/batch
This is the delayed ISA conversion series, now hopefully working across the
board.
Pulled. Thanks.
Regards,
Anthony Liguori
Avi Kivity (4):
mips_malta: move i8259 initializa
On 09/25/2011 09:18 AM, Avi Kivity wrote:
Please pull from
git://github.com/avikivity/qemu.git memory/urgent
to receive for a fix which kills ppc_prep immediately after launch.
Pulled. Thanks.
Regards,
Anthony Liguori
Avi Kivity (1):
ppc_prep: fix pci config space initialization
hw/pre
On 09/18/2011 03:51 PM, Jan Kiszka wrote:
From: Jan Kiszka
As we register old portio regions via ioport_register, we are also
responsible for providing the word access wrapper.
Signed-off-by: Jan Kiszka
---
Oops, was lacking a shift for word reads.
Thanks, applied; while I don't like it, v
Third time's a charm.
v1 -> v3: actually make it compile
Paolo Bonzini (2):
ptimer: move declarations to ptimer.h
vmstate: extract declarations out of hw/hw.h
hw/arm_timer.c|1 +
hw/etraxfs_timer.c|1 +
hw/grlib_apbuart.c|1 +
hw/grlib_gptimer.c|1 +
hw/h
Signed-off-by: Paolo Bonzini
---
hw/arm_timer.c|1 +
hw/etraxfs_timer.c|1 +
hw/grlib_apbuart.c|1 +
hw/grlib_gptimer.c|1 +
hw/lan9118.c |1 +
hw/leon3.c|1 +
hw/lm32_timer.c |1 +
hw/mcf5206.c |1 +
hw/mcf52
Luiz Capitulino writes:
> On Mon, 26 Sep 2011 11:34:34 +0200
> Markus Armbruster wrote:
>
>> Luiz Capitulino writes:
>>
>> > On Fri, 23 Sep 2011 17:36:53 +0200
>> > Markus Armbruster wrote:
>> >
>> >> Luiz Capitulino writes:
>> >>
>> >> > On Fri, 23 Sep 2011 09:51:24 +0200
>> >> > Markus Ar
On Mon, Sep 26, 2011 at 5:30 PM, Stefan Hajnoczi
wrote:
> On Mon, Sep 26, 2011 at 05:11:00PM +0800, Zhi Yong Wu wrote:
>> On Mon, Sep 26, 2011 at 3:55 PM, Stefan Hajnoczi wrote:
>> > On Mon, Sep 26, 2011 at 01:32:34PM +0800, Zhi Yong Wu wrote:
>> >> On Fri, Sep 23, 2011 at 11:57 PM, Stefan Hajnoc
On Mon, Sep 26, 2011 at 09:35:01AM -0300, Marcelo Tosatti wrote:
> On Fri, Sep 23, 2011 at 04:57:26PM +0100, Stefan Hajnoczi wrote:
> > Here is my generic image streaming branch, which aims to provide a way
> > to copy the contents of a backing file into an image file of a running
> > guest without
On 2011-09-26 12:26, Jan Kiszka wrote:
> On 2011-09-26 11:49, Paolo Bonzini wrote:
>> On 09/26/2011 11:23 AM, Jan Kiszka wrote:
>>> scsi_req_parsed target 0 lun 0 tag 0 command 0 dir 0 length 0
>>> scsi_req_parsed_lba target 0 lun 0 tag 0 command 0 lba 0
>>> scsi_req_alloc target 0 lun 0 tag 0
>>>
Am 25.09.2011 16:18, schrieb Avi Kivity:
> Please pull from
>
> git://github.com/avikivity/qemu.git memory/urgent
>
> to receive for a fix which kills ppc_prep immediately after launch.
>
> Avi Kivity (1):
> ppc_prep: fix pci config space initialization
>
> hw/prep_pci.c |2 +-
> 1 fil
On 09/26/2011 05:10 PM, Jan Kiszka wrote:
And you were right: it turned out to be a driver issue. The bug sneaked
in while adapting the original driver to some specific differences
between QEMU and real HW (here: lacking compat bit support).
Cool, then we can leave in the patch I think. I orig
When running openat using qemu-arm, we stumbled over invalid permissions
on the created files. The reason for this is that the mode parameter gets
treates as an O_... flag, which it isn't - it's a permission bitmask.
This patch removes the needless translation of the mode parameter,
rendering perm
Include config.h in softfloat.c, so that the target specific ifdefs in
softfloat-specialize.h are evaluated correctly. This was accidentally
broken in commit 789ec7ce2 when config-target.h was removed from
softfloat.h, and means that most targets will have been returning the
wrong results for calcu
On 2011-09-26 17:22, Paolo Bonzini wrote:
> On 09/26/2011 05:10 PM, Jan Kiszka wrote:
>> And you were right: it turned out to be a driver issue. The bug sneaked
>> in while adapting the original driver to some specific differences
>> between QEMU and real HW (here: lacking compat bit support).
>
>
The following series of patches adds TPM (Trusted Platform Module) support
to Qemu. An emulator for the TIS (TPM Interface Spec) interface is
added that provides the basis for accessing a 'backend' implementing the actual
TPM functionality. The TIS emulator serves as a 'frontend' enabling for
examp
This patch uses the possibility to add a vendor-specific register and
adds a debug register useful for dumping the TIS's internal state. This
register is only active in a debug build (#define DEBUG_TIS).
v9:
- prefixing all function with tpm_tis_ and all constants with TPM_TIS_
v3:
- all output
This patch adds the main code of the TPM frontend driver, the TPM TIS
interface, to Qemu. The code is largely based on the previous implementation
for Xen but has been significantly extended to meet the standard's
requirements, such as the support for changing of localities and all the
functionalit
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=,id=
-device tpm-tis,tpmdev=
and
./qemu-... -tpmdev ?
where the latter works similar to -soundhw ? and shows a list of
available TPM backends (for exa
>From Andreas Niederl's original posting with adaptations where necessary:
This patch is based of off version 9 of Stefan Berger's patch series
"Qemu Trusted Platform Module (TPM) integration"
and adds a new backend driver for it.
This patch adds a passthrough backend driver for passing command
Build the TPM frontend code that has been added so far.
Signed-off-by: Stefan Berger
---
Makefile.target |1 +
configure | 11 +++
2 files changed, 12 insertions(+)
Index: qemu-git.pt/Makefile.target
===
--- qe
This moves BCR defines to the common header and immediately makes use of
them to add BCR_APROMWE, replacing the open-coded write check in
pcnet_aprom_writeb.
Signed-off-by: Jan Kiszka
---
hw/pcnet-pci.c |4 ++--
hw/pcnet.c | 18 --
hw/pcnet.h | 19
Implement the various IO access widths according to the spec. This
specifically unbreaks word and dword access to the PROM area that is
mapped into IO space. It also drops redundant upper limit checks and
spurious "return void".
Signed-off-by: Jan Kiszka
---
Note that this leaves the MMIO path u
Vadim,
Did you see comment #27? Is that helpful, would you like any additional
info? Are there other things you would like for me to try?
Thanks,
-Rick
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bug
On Mon, Sep 26, 2011 at 9:45 AM, Avi Kivity wrote:
> On 09/25/2011 11:19 PM, Blue Swirl wrote:
>>
>> Add a monitor command 'info mtree' to show the memory hierarchy
>> much like /proc/iomem in Linux.
>>
>>
>> diff --git a/memory.c b/memory.c
>> index ba74435..6b33fc4 100644
>> --- a/memory.c
>> ++
On Mon, Sep 26, 2011 at 10:08 AM, Avi Kivity wrote:
> On 09/25/2011 08:31 PM, Blue Swirl wrote:
>>
>> >
>> > Please point out a test case and I'll try to fix it.
>>
>> Run qemu-system-ppc without any arguments. There is a black bar
>> (because of vga.chain4), it shouldn't be there.
>
> With your
On 09/26/2011 08:15 PM, Blue Swirl wrote:
On Mon, Sep 26, 2011 at 10:08 AM, Avi Kivity wrote:
> On 09/25/2011 08:31 PM, Blue Swirl wrote:
>>
>> >
>> >Please point out a test case and I'll try to fix it.
>>
>> Run qemu-system-ppc without any arguments. There is a black bar
>> (because of
T0 was already masked to 16 bits when loading it.
Signed-off-by: Jan Kiszka
---
target-i386/translate.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/target-i386/translate.c b/target-i386/translate.c
index b894e97..1ef8d16 100644
--- a/target-i386/translate.c
+++ b/ta
On Mon, Sep 26, 2011 at 5:18 PM, Avi Kivity wrote:
> On 09/26/2011 08:15 PM, Blue Swirl wrote:
>>
>> On Mon, Sep 26, 2011 at 10:08 AM, Avi Kivity wrote:
>> > On 09/25/2011 08:31 PM, Blue Swirl wrote:
>> >>
>> >> >
>> >> > Please point out a test case and I'll try to fix it.
>> >>
>> >> Run
On Mon, Sep 26, 2011 at 11:56 AM, Peter Maydell
wrote:
> On 26 September 2011 12:43, Jan Kiszka wrote:
>> On 2011-09-26 13:33, Peter Maydell wrote:
>>> On 26 September 2011 11:51, Jan Kiszka wrote:
This increases the overhead of frequently executed helpers. We need to
move rule past QE
On 09/26/2011 08:20 PM, Blue Swirl wrote:
On Mon, Sep 26, 2011 at 5:18 PM, Avi Kivity wrote:
> On 09/26/2011 08:15 PM, Blue Swirl wrote:
>>
>> On Mon, Sep 26, 2011 at 10:08 AM, Avi Kivitywrote:
>> >On 09/25/2011 08:31 PM, Blue Swirl wrote:
>> >>
>> >>>
>> >>> Please po
On 2011-09-26 19:22, Blue Swirl wrote:
> On Mon, Sep 26, 2011 at 11:56 AM, Peter Maydell
> wrote:
>> On 26 September 2011 12:43, Jan Kiszka wrote:
>>> On 2011-09-26 13:33, Peter Maydell wrote:
On 26 September 2011 11:51, Jan Kiszka wrote:
> This increases the overhead of frequently exec
On 09/26/2011 11:15 AM, Laurent Desnogues wrote:
On Mon, Sep 26, 2011 at 10:01 AM, Mulyadi Santosa
wrote:
> Hi...
>
> On Mon, Sep 26, 2011 at 14:46, Jan Kiszka wrote:
>> This increases the overhead of frequently executed helpers.
>>
>> Signed-off-by: Jan Kiszka
>
> IMHO, stack protector s
On 09/09/2011 06:28 PM, al pat wrote:
We are doing an experiment with kvm-clock to validate its
effectiveness, particularly when running NTP on the host to make sure
the host’s clock stays properly sync.
Our observations leads us to a few unanswered questions, including the
possibility of a b
Lluís Vilanova writes:
> Stefan Hajnoczi writes:
>> On Mon, Sep 26, 2011 at 12:23:21AM +0200, Lluís Vilanova wrote:
>>> 1) Cannot start QEMU with KVM when the device is enabled:
>>> kvm_set_phys_mem: error registering slot: Invalid argument
>>>
>>> 2) The driver never gets called on a read/write
On Mon, Sep 26, 2011 at 5:24 PM, Avi Kivity wrote:
> On 09/26/2011 08:20 PM, Blue Swirl wrote:
>>
>> On Mon, Sep 26, 2011 at 5:18 PM, Avi Kivity wrote:
>> > On 09/26/2011 08:15 PM, Blue Swirl wrote:
>> >>
>> >> On Mon, Sep 26, 2011 at 10:08 AM, Avi Kivity wrote:
>> >> > On 09/25/2011 08:
On Mon, Sep 26, 2011 at 5:33 PM, Jan Kiszka wrote:
> On 2011-09-26 19:22, Blue Swirl wrote:
>> On Mon, Sep 26, 2011 at 11:56 AM, Peter Maydell
>> wrote:
>>> On 26 September 2011 12:43, Jan Kiszka wrote:
On 2011-09-26 13:33, Peter Maydell wrote:
> On 26 September 2011 11:51, Jan Kiszka
On 2011-09-26 20:20, Blue Swirl wrote:
> On Mon, Sep 26, 2011 at 5:33 PM, Jan Kiszka wrote:
>> On 2011-09-26 19:22, Blue Swirl wrote:
>>> On Mon, Sep 26, 2011 at 11:56 AM, Peter Maydell
>>> wrote:
On 26 September 2011 12:43, Jan Kiszka wrote:
> On 2011-09-26 13:33, Peter Maydell wrote:
On Mon, 2011-09-26 at 12:04 +0200, Alexander Graf wrote:
> Am 26.09.2011 um 09:51 schrieb David Gibson :
>
> > On Fri, Sep 09, 2011 at 08:11:54AM -0500, Stuart Yoder wrote:
> >> Based on the discussions over the last couple of weeks
> >> I have updated the device fd file layout proposal and
> >> t
On Mon, Sep 26, 2011 at 6:25 PM, Jan Kiszka wrote:
> On 2011-09-26 20:20, Blue Swirl wrote:
>> On Mon, Sep 26, 2011 at 5:33 PM, Jan Kiszka wrote:
>>> On 2011-09-26 19:22, Blue Swirl wrote:
On Mon, Sep 26, 2011 at 11:56 AM, Peter Maydell
wrote:
> On 26 September 2011 12:43, Jan Kisz
configure: Detect predefined compiler symbols for ARM and HPPA
To be able to detect some ARM / HPPA based architectures such as with
OpenBSD/(armish / zaurus) or OpenBSD/hppa.
Signed-off-by: Brad Smith
---
configure |8 +++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git
On Mon, Sep 26, 2011 at 12:35:10PM -0400, Stefan Berger wrote:
> +void tpm_display_backend_drivers(FILE *out)
> +{
> +int i;
> +
> +fprintf(out, "Supported TPM types (choose only one):\n");
> +
> +for (i = 0; bes[i] != NULL; i++) {
> +fprintf(out, "%12s %s",
> +
On 26 September 2011 19:20, Blue Swirl wrote:
> It would be interesting to have some benchmarks. I'd expect that most
> of the run time is spent within generated code, the next largest item
> should be the translator and any helpers should be marginal.
Depends a lot on the target, I suspect. On A
On Mon, Sep 26, 2011 at 12:35:11PM -0400, Stefan Berger wrote:
> +static int tpm_tis_init(ISADevice *dev)
> +{
> +TPMState *s = DO_UPCAST(TPMState, busdev, dev);
> +TPMTISState *tis = &s->s.tis;
> +int iomemtype, rc;
> +
> +qemu_mutex_init(&s->state_lock);
> +qemu_cond_init(&s->
On 09/26/2011 10:09 PM, Michael S. Tsirkin wrote:
> +cpu_register_physical_memory(TPM_TIS_ADDR_BASE,
> + 0x1000 * TPM_TIS_NUM_LOCALITIES,
> + iomemtype);
I think memory_region_init_io are supposed to be used for new devices
f
On Mon, Sep 26, 2011 at 12:35:14PM -0400, Stefan Berger wrote:
> >From Andreas Niederl's original posting with adaptations where necessary:
>
> This patch is based of off version 9 of Stefan Berger's patch series
> "Qemu Trusted Platform Module (TPM) integration"
> and adds a new backend driver
On Mon, Sep 26, 2011 at 12:35:09PM -0400, Stefan Berger wrote:
> The following series of patches adds TPM (Trusted Platform Module) support
> to Qemu. An emulator for the TIS (TPM Interface Spec) interface is
> added that provides the basis for accessing a 'backend' implementing the
> actual
> TPM
Is there a way to point an older qemu release (currently running
qemu-kvm-0.12.1.2-2.16) to iPXE products?
We have built iPXE and installed the files and tested by changing the
symbolic links in /usr/share/qemu-kvm (RH6.1 system) to point to the
iPXE files. We would like to package the files
On 09/26/2011 10:41 AM, Avi Kivity wrote:
> Native tcg ops for common vector instructions would probably be quite a
> speedup.
It's very possible to simply open-code many of the vector operations.
I've done a port of qemu to the SPU (aka Cell) processor. This core
has no scalar operations; all
On 09/26/2011 10:43 PM, Richard Henderson wrote:
On 09/26/2011 10:41 AM, Avi Kivity wrote:
> Native tcg ops for common vector instructions would probably be quite a
speedup.
It's very possible to simply open-code many of the vector operations.
I've done a port of qemu to the SPU (aka Cell) pr
On 09/26/2011 12:52 PM, Avi Kivity wrote:
> Why do floating point ops need helpers?
Because TCG doesn't do any native floating point.
r~
On Mon, Sep 26, 2011 at 2:51 AM, David Gibson
wrote:
> On Fri, Sep 09, 2011 at 08:11:54AM -0500, Stuart Yoder wrote:
>> Based on the discussions over the last couple of weeks
>> I have updated the device fd file layout proposal and
>> tried to specify it a bit more formally.
>>
>>
>
> The other obvious possibility is a pure ioctl interface. To match what
> this proposal is trying to describe, plus the runtime interfaces, we'd
> need something like:
>
> /* :0 - PCI devices, :1 - Devices path device, 63:2 - reserved */
> #define VFIO_DEVICE_GET_FLAGS _IOR(,
1 - 100 of 142 matches
Mail list logo
