On 11 September 2011 21:31, Blue Swirl wrote:
> PPC
> memory
> system addr off size 7fff
> -vga.chain4 addr 000a off size 1
> -macio addr 8088 off size 8
> --macio-nvram addr 0006 off size 2
> --pmac-ide addr 0002
On Sun, Sep 11, 2011 at 8:17 PM, Yehuda Sadeh Weinraub
wrote:
> On Sun, Sep 11, 2011 at 8:14 PM, Sage Weil wrote:
>> On Fri, 9 Sep 2011, Kevin Wolf wrote:
>>> Am 08.09.2011 18:36, schrieb Sage Weil:
>>> > On Thu, 8 Sep 2011, Kevin Wolf wrote:
>>> >> Am 08.09.2011 01:06, schrieb Yehuda Sadeh:
>>>
Am 10.09.2011 02:54, schrieb Dong Xu Wang:
> 于Fri 09 Sep 2011 10:27:26 PM CST,Kevin Wolf写到:
>> Am 09.09.2011 07:48, schrieb Dong Xu Wang:
>>> As raw file format does not support backing_file and copy on write feature,
>>> so
>>> I add COW to it to support backing_file option. I store dirty bitmap
Guys,
could you please take a look at the following patch for qemu ahci emulation?
The patch is from the FreeBSD AHCI developer/maintainer.
If it looks OK, then we will submit it according to the rules.
Thank you!
Original Message
Sender: Alexander Motin
Message-ID: <4e6cc7c1.
On 09/12/2011 07:26 AM, Paolo Bonzini wrote:
> On 09/11/2011 03:29 PM, Blue Swirl wrote:
>> After this patch set, only load and store op helpers remain in
>> op_helper.c. I have some patches for those but they need more thought.
>
> Have you benchmarked it?
Asking for a benchmark without full con
Am 12.09.2011 05:17, schrieb Yehuda Sadeh Weinraub:
> On Sun, Sep 11, 2011 at 8:14 PM, Sage Weil wrote:
>> On Fri, 9 Sep 2011, Kevin Wolf wrote:
>>> Am 08.09.2011 18:36, schrieb Sage Weil:
On Thu, 8 Sep 2011, Kevin Wolf wrote:
> Am 08.09.2011 01:06, schrieb Yehuda Sadeh:
>> The follow
On 09/12/2011 10:01 AM, Richard Henderson wrote:
> > After this patch set, only load and store op helpers remain in
> > op_helper.c. I have some patches for those but they need more thought.
>
> Have you benchmarked it?
Asking for a benchmark without full conversion is pointless.
Agreed. B
Am 10.09.2011 10:59, schrieb Frediano Ziglio:
> Signed-off-by: Frediano Ziglio
> ---
> block/qcow2.c | 14 +++---
> 1 files changed, 7 insertions(+), 7 deletions(-)
Thanks, applied to the block branch.
Kevin
Alexander Graf wrote:
> Am 11.09.2011 um 16:43 schrieb Alexander Motin :
>> I've found that FreeBSD AHCI driver doesn't work with AHCI hardware
>> emulation of QEMU 0.15.0. I believe the problem is on QEMU's side. As I
>> see, it clears port's Interrupt Enable register each time when reset of
>> an
On Sun, Sep 11, 2011 at 01:31:03PM +, Blue Swirl wrote:
> Make CWP and PSTATE helpers take a parameter for CPUState instead
> of relying on global env. Move the functions to helper.c, remove
> wrapper functions.
>
> Signed-off-by: Blue Swirl
> ---
> Makefile.target |2 +-
> tar
Remove a spurious second map of the OMAP GPMC CS0 region on reset.
This fixes an assertion failure when we try to add the region to
its container when it was already added. (The old code did not
complain about mismatched map/unmap calls, but the new MemoryRegion
implementation does.)
Signed-off-by
Am 10.09.2011 10:23, schrieb Frediano Ziglio:
> QCowL2Meta::offset is not cluster aligned but only sector aligned
> however nb_clusters count cluster from cluster start.
> This fix range check. Note that old code have no corruption issues
> related to this check cause it only cause intersection to
Public bug reported:
I use Qemu 0.15.0 (via a FreeBSD qemu-devel-0.15.0 port) and observe the
following
problem with the screendump command.
Environment:
- qemu started with a standard vga adapter emulation (not sure if this
important)
- SDL interface is used (not sure if this important)
- gues
On 12 September 2011 09:33, Peter Maydell wrote:
> Remove a spurious second map of the OMAP GPMC CS0 region on reset.
> This fixes an assertion failure when we try to add the region to
> its container when it was already added. (The old code did not
> complain about mismatched map/unmap calls, but
On 09/11/2011 11:31 PM, Blue Swirl wrote:
Add a monitor command 'info mtree' to show the memory hierarchy.
Does this turn the memory hierarchy into an ABI? It shouldn't. Things
like BARs are immutable but if a BAR is internally composed of several
regions, well that's no one's business.
On 2011-09-12 10:46, Avi Kivity wrote:
> On 09/11/2011 11:31 PM, Blue Swirl wrote:
>> Add a monitor command 'info mtree' to show the memory hierarchy.
>>
>
> Does this turn the memory hierarchy into an ABI? It shouldn't. Things
> like BARs are immutable but if a BAR is internally composed of sev
Am 10.09.2011 06:23, schrieb Ronnie Sahlberg:
> List,
>
> Please find a patch that adds built-in iSCSI support to QEMU when built and
> linked against the multiplatform iscsi initiator library at
> git://github.com/sahlberg/libiscsi.git
>
> All previous comments and suggestions have been addre
On 09/09/2011 07:47 PM, Peter Maydell wrote:
Ping?
On 25 August 2011 18:59, Peter Maydell wrote:
> Signed-off-by: Peter Maydell
> ---
> Another device I needed to convert so I could connect it to omap_gpmc
> for an omap3 board (in this case overo).
>
Sorry - applied to memory/queue.
--
On 2011-09-12 08:43, Richard Henderson wrote:
> On 09/11/2011 09:31 PM, Blue Swirl wrote:
>> Field 'offset' is always zero, maybe that is not interesting. Will it
>> become one day?
>
> It's not always zero, but only used by certain devices.
I do not see any users, neither upstream nor in Avi's t
On 09/11/2011 02:38 PM, Alexander Graf wrote:
Am 11.09.2011 um 12:41 schrieb Avi Kivity:
> On 09/08/2011 07:54 PM, Alexander Graf wrote:
>> PS: Please test your patches. This one could have been found with an
invocation
>> as simple as "qemu-system-ppc". We boot into the OpenBIOS prompt
On 09/12/2011 12:01 PM, Jan Kiszka wrote:
On 2011-09-12 08:43, Richard Henderson wrote:
> On 09/11/2011 09:31 PM, Blue Swirl wrote:
>> Field 'offset' is always zero, maybe that is not interesting. Will it
>> become one day?
>
> It's not always zero, but only used by certain devices.
I do not
On 09/12/2011 11:53 AM, Jan Kiszka wrote:
On 2011-09-12 10:46, Avi Kivity wrote:
> On 09/11/2011 11:31 PM, Blue Swirl wrote:
>> Add a monitor command 'info mtree' to show the memory hierarchy.
>>
>
> Does this turn the memory hierarchy into an ABI? It shouldn't. Things
> like BARs are immut
On Sat, Sep 10, 2011 at 02:23:30PM +1000, Ronnie Sahlberg wrote:
Looking good. I think this is worth merging because it does offer
benefits over host iSCSI.
> +static void
> +iscsi_abort_task_cb(struct iscsi_context *iscsi, int status, void
> *command_data,
> +void *private_
Block drivers typically have two copies of the flush operation: a
synchronous .bdrv_flush() and an asynchronous .bdrv_aio_flush(). This
patch applies the same emulation that we already do for
.bdrv_read()/.bdrv_write() to .bdrv_flush(). Now block drivers only
need to provide either .bdrv_aio_flus
On Fri, Sep 02, 2011 at 05:50:05PM -0300, Luiz Capitulino wrote:
> On Fri, 2 Sep 2011 12:34:55 -0500
> Anthony Liguori wrote:
>
> > New QMP only command to change the VNC server's listening address.
> >
> > Signed-off-by: Anthony Liguori
> > ---
> > v1 -> v2
> > - Enhanced docs (Luiz)
> > ---
On Mon, Sep 12, 2011 at 12:04 AM, Andreas Färber wrote:
> Am 11.09.2011 um 22:39 schrieb Alexander Graf:
>
>> Am 10.09.2011 um 23:09 schrieb Stefan Weil :
>>
>>> http://perso.magic.fr/l_indien/ was removed several years ago.
>>> There is obviously no mirror or any other replacement for it.
>>
>> I
On 2011-09-12 11:11, Avi Kivity wrote:
> On 09/12/2011 12:01 PM, Jan Kiszka wrote:
>> On 2011-09-12 08:43, Richard Henderson wrote:
>>> On 09/11/2011 09:31 PM, Blue Swirl wrote:
Field 'offset' is always zero, maybe that is not interesting. Will it
become one day?
>>>
>>> It's not alwa
I sent before noticing that your email dropped qemu-devel@nongnu.org
from the CC list again.
Please use Reply-All when responding on mailing lists. That way the
mailing list stays CCed and others can contribute to the discussion.
On Mon, Sep 12, 2011 at 10:25 AM, Stefan Hajnoczi wrote:
> On Mon
On Mon, Sep 12, 2011 at 10:17:21AM +0100, Daniel P. Berrange wrote:
> On Fri, Sep 02, 2011 at 05:50:05PM -0300, Luiz Capitulino wrote:
> > On Fri, 2 Sep 2011 12:34:55 -0500
> > Anthony Liguori wrote:
> >
> > > New QMP only command to change the VNC server's listening address.
> > >
> > > Signed
Remove the unused function tcg_out_addi() from the ARM TCG backend;
this fixes a compilation failure on ARM hosts with newer gcc.
Signed-off-by: Peter Maydell
---
A previous patch from Richard Henderson for this compile failure:
http://patchwork.ozlabs.org/patch/110400/
was rejected, so here's a
On 12.09.2011, at 11:07, Avi Kivity wrote:
> On 09/11/2011 02:38 PM, Alexander Graf wrote:
>> Am 11.09.2011 um 12:41 schrieb Avi Kivity:
>>
>> > On 09/08/2011 07:54 PM, Alexander Graf wrote:
>> >> PS: Please test your patches. This one could have been found with an
>> >> invocation
>> >>
Hi,
Sorry for missing out the CC in the previous mail .
Can I do this on the running VMs ..?,
I'm using opennebula to spawn the VMs, so it would be good if edit before
spawning the VMs..
regards
Bala
On Mon, Sep 12, 2011 at 2:56 PM, Stefan Hajnoczi wrote:
> I sent before noticing that your ema
On Sun, Sep 11, 2011 at 09:51:06PM +0300, Michael S. Tsirkin wrote:
> On Sun, Sep 11, 2011 at 12:01:49PM -0300, Marcelo Tosatti wrote:
> > On Sun, Sep 11, 2011 at 12:23:57PM +0300, Michael S. Tsirkin wrote:
> > > On Fri, Sep 09, 2011 at 03:34:26PM -0300, Marcelo Tosatti wrote:
> > > > > > something
I/O
io addr off size 1
-e1000-io addr c000 off size 40
-piix-bmdma-container addr c040 off size 10
--bmdma addr 000c off size 4
--piix-bmdma addr 0008 off 00
Signed-off-by: Avi Kivity
---
hw/mips_mipssim.c | 15 ---
1 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/hw/mips_mipssim.c b/hw/mips_mipssim.c
index ac6..7407158 100644
--- a/hw/mips_mipssim.c
+++ b/hw/mips_mipssim.c
@@ -137,8 +137,9 @@ static void mipsnet_init(i
From: Richard Henderson
The use of DEVICE_NATIVE_ENDIAN cleans up lots of ifdefs in
many of the callers.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/mips_jazz.c | 14 --
hw/mips_malta.c |7 ++-
hw/musicpal.c| 14 ++--
Signed-off-by: Avi Kivity
---
hw/musicpal.c | 243 +++--
1 files changed, 99 insertions(+), 144 deletions(-)
diff --git a/hw/musicpal.c b/hw/musicpal.c
index ade5a91..9b1f380 100644
--- a/hw/musicpal.c
+++ b/hw/musicpal.c
@@ -19,6 +19,7 @@
#i
Signed-off-by: Avi Kivity
---
hw/omap.h | 11 ++-
hw/omap1.c| 338 +++-
hw/omap_sx1.c |4 +-
hw/palm.c |4 +-
4 files changed, 203 insertions(+), 154 deletions(-)
diff --git a/hw/omap.h b/hw/omap.h
index d9ab006..eec8f04
On 09/12/2011 01:37 PM, Gerd Hoffmann wrote:
I/O
io addr off size 1
-e1000-io addr c000 off size 40
-piix-bmdma-container addr c040 off size 10
--bmdma addr 000c off size 4
On Mon, Sep 12, 2011 at 03:49:53PM +0530, bala suru wrote:
> Can I do this on the running VMs ..?,
> I'm using opennebula to spawn the VMs, so it would be good if edit before
> spawning the VMs..
I don't think you can do this on a running VM.
At the bottom of this page they show how you can add t
On 09/12/2011 11:14 AM, Stefan Hajnoczi wrote:
Block drivers typically have two copies of the flush operation: a
synchronous .bdrv_flush() and an asynchronous .bdrv_aio_flush(). This
patch applies the same emulation that we already do for
.bdrv_read()/.bdrv_write() to .bdrv_flush(). Now block d
From: "Edgar E. Iglesias"
Signed-off-by: Edgar E. Iglesias
Signed-off-by: Avi Kivity
---
hw/etraxfs_timer.c | 31 ---
1 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/hw/etraxfs_timer.c b/hw/etraxfs_timer.c
index b08e574..57dc739 100644
--- a/hw/et
Signed-off-by: Avi Kivity
---
hw/mips_jazz.c | 90
1 files changed, 45 insertions(+), 45 deletions(-)
diff --git a/hw/mips_jazz.c b/hw/mips_jazz.c
index f3c9f93..bde9be6 100644
--- a/hw/mips_jazz.c
+++ b/hw/mips_jazz.c
@@ -52,44 +52,42 @
From: "Edgar E. Iglesias"
Signed-off-by: Edgar E. Iglesias
Signed-off-by: Avi Kivity
---
hw/etraxfs_dma.c | 43 +++
1 files changed, 27 insertions(+), 16 deletions(-)
diff --git a/hw/etraxfs_dma.c b/hw/etraxfs_dma.c
index e8ad9e6..03a623b 100644
--- a
On 09/04/2011 10:29 PM, Hervé Poussineau wrote:
> +mipsnet_write(uint64_t addr, uint64_t val) "write addr=0x%" PRIx64 "
> val=0x%" PRIx64
This breaks the build, though actually it is because of a bug in the parser. It
should be written as
mipsnet_write(uint64_t addr, uint64_t val) "write addr=0
From: Richard Henderson
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/serial.c | 145 +--
1 files changed, 31 insertions(+), 114 deletions(-)
diff --git a/hw/serial.c b/hw/serial.c
index 2e6d212..310bfde 100644
--- a
From: "Edgar E. Iglesias"
Signed-off-by: Edgar E. Iglesias
Signed-off-by: Avi Kivity
---
hw/etraxfs_ser.c | 33 ++---
1 files changed, 18 insertions(+), 15 deletions(-)
diff --git a/hw/etraxfs_ser.c b/hw/etraxfs_ser.c
index 0036037..298b985 100644
--- a/hw/etraxf
On 09/12/2011 11:14 AM, Stefan Hajnoczi wrote:
Block drivers typically have two copies of the flush operation: a
synchronous .bdrv_flush() and an asynchronous .bdrv_aio_flush(). This
patch applies the same emulation that we already do for
.bdrv_read()/.bdrv_write() to .bdrv_flush(). Now block d
Hi,
Thanks for the help , Now I could do cat /dev/ttyS0 , no error . it runs
well .
But I need to connect a some USB device which will create a virtual
serialport called /dev/ttyACM0, I cloud not see this on the Vm running ..
This XML format I used
RAW = [ type = "kvm",
data = "" ]
H
From: Richard Henderson
The only non-obvious part is pic_poll_read which used
"addr1 >> 7" to detect whether one referred to either
the master or slave PIC. Instead, test this directly.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/i8259.c | 65 +
From: "Edgar E. Iglesias"
Signed-off-by: Edgar E. Iglesias
Signed-off-by: Avi Kivity
---
hw/etraxfs_pic.c | 30 +++---
1 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/hw/etraxfs_pic.c b/hw/etraxfs_pic.c
index 4feffda..47a56d7 100644
--- a/hw/etraxfs_p
From: Richard Henderson
In particular, the i8259 was being initialized before the ISA bus,
leading to a crash.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/pc_piix.c | 22 --
1 files changed, 12 insertions(+), 10 deletions(-)
diff --git a/hw/pc_piix
From: Richard Henderson
Remove the get_system_memory() call from serial_mm_init, pushing
it back into the callers. In many cases we already have the
system memory region available.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/mips_jazz.c |8
hw/mip
From: Richard Henderson
Not used yet, but at least we're provided with the correct region.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/isa-bus.c |4 +++-
hw/isa.h |2 +-
hw/mips_jazz.c | 17 ++---
hw/mips_r4k.c |2 +-
hw/pc_piix.c |
From: Richard Henderson
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/i8254.c | 16 +---
1 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/hw/i8254.c b/hw/i8254.c
index a9ca9f6..12571ef 100644
--- a/hw/i8254.c
+++ b/hw/i8254.c
@@ -55,6 +55,7 @@
i8259 is an ISA device; and the ISA bus is supplied by piix4. Later patches
make this dependency explicit.
Signed-off-by: Avi Kivity
---
hw/mips_malta.c |9 +
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/hw/mips_malta.c b/hw/mips_malta.c
index 0110daa..172f74e 1006
Signed-off-by: Avi Kivity
---
hw/mips_r4k.c | 39 +++
1 files changed, 15 insertions(+), 24 deletions(-)
diff --git a/hw/mips_r4k.c b/hw/mips_r4k.c
index 5d002c5..805d02a 100644
--- a/hw/mips_r4k.c
+++ b/hw/mips_r4k.c
@@ -42,8 +42,8 @@
const char *initr
Signed-off-by: Avi Kivity
---
hw/omap.h |7 ++-
hw/omap1.c | 195
2 files changed, 111 insertions(+), 91 deletions(-)
diff --git a/hw/omap.h b/hw/omap.h
index eec8f04..cb3b524 100644
--- a/hw/omap.h
+++ b/hw/omap.h
@@ -678,7 +678
From: Richard Henderson
Slightly non-obvious with mips_jazz passing in the region
structure to populate.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/mips_jazz.c |4 ++-
hw/pc.h|2 +-
hw/pckbd.c | 59 ++
From: Richard Henderson
The serial_mm_init path is as yet unconverted.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/serial.c | 15 ---
1 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/hw/serial.c b/hw/serial.c
index ed7fd0a..2e6d212 100644
---
From: Richard Henderson
All callers passed 1.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/mips_jazz.c |4 ++--
hw/mips_malta.c |2 +-
hw/musicpal.c|4 ++--
hw/omap_uart.c |4 ++--
hw/pc.h |3 +-
On Mon, Sep 12, 2011 at 07:21:48AM -0300, Marcelo Tosatti wrote:
> > We could, for example, keep a stub function 0 around.
>
> I suppose the guest will remove all functions of a device once you
> attempt to hot-unplug a function.
>
> What is the problem with adding more PCI buses, instead of mult
On Mon, Sep 12, 2011 at 07:56:07AM -0300, Marcelo Tosatti wrote:
> On Mon, Sep 12, 2011 at 07:21:48AM -0300, Marcelo Tosatti wrote:
> > > We could, for example, keep a stub function 0 around.
> >
> > I suppose the guest will remove all functions of a device once you
> > attempt to hot-unplug a fun
From: Richard Henderson
To replace isa_init_ioport and isa_init_ioport_range
as the ISA devices are converted to the memory api.
[avi: use memory_region_size()]
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/isa-bus.c | 10 ++
hw/isa.h |5 -
2 files c
On 09/12/2011 01:50 PM, Avi Kivity wrote:
git://github.com/avikivity/qemu.git memory/batch
More of the same. I tested what I could using the images on the qemu wiki -
note not all images boot even on upstream.
Whoops - don't pull - bad patch in there.
--
error compiling committee.c: too
From: Richard Henderson
Returns the I/O address space. Useful for implementing
PCI-ISA bridge devices.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/pci.c |5 +
hw/pci.h |1 +
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/hw/pci.c b/hw/pci.c
i
Signed-off-by: Avi Kivity
---
hw/mips_malta.c | 53 ++---
1 files changed, 26 insertions(+), 27 deletions(-)
diff --git a/hw/mips_malta.c b/hw/mips_malta.c
index e7cdf20..0110daa 100644
--- a/hw/mips_malta.c
+++ b/hw/mips_malta.c
@@ -57,6 +57,9 @
git://github.com/avikivity/qemu.git memory/batch
More of the same. I tested what I could using the images on the qemu wiki -
note not all images boot even on upstream.
Avi Kivity (9):
mips_jazz: convert to memory API
mips_malta: convert to memory API
mips_mipssim: convert to memory API
From: Richard Henderson
This requires some amount of hoop-jumping, so that we don't
inadvertently claim port 0x3f6, which is used by ISA IDE.
The sysbus initialization path is as yet unconverted.
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/fdc.c | 53 +
From: Richard Henderson
Signed-off-by: Richard Henderson
Signed-off-by: Avi Kivity
---
hw/cs4231a.c | 38 +++---
1 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/hw/cs4231a.c b/hw/cs4231a.c
index 598f032..e16665e 100644
--- a/hw/cs4231a.c
+++ b
The two code paths (for ADDRESS_SPACE_IO and ADDRESS_SPACE_MEM) are
identical. Unify them.
Signed-off-by: Avi Kivity
---
hw/pci.c | 13 ++---
1 files changed, 2 insertions(+), 11 deletions(-)
diff --git a/hw/pci.c b/hw/pci.c
index d23fa74..a4d7761 100644
--- a/hw/pci.c
+++ b/hw/pci.c
From: "Edgar E. Iglesias"
Signed-off-by: Edgar E. Iglesias
Signed-off-by: Avi Kivity
---
hw/etraxfs_eth.c | 30 --
1 files changed, 16 insertions(+), 14 deletions(-)
diff --git a/hw/etraxfs_eth.c b/hw/etraxfs_eth.c
index 48de6dc..246a279 100644
--- a/hw/etraxfs_e
On 2011-09-12 12:50, Avi Kivity wrote:
> From: Richard Henderson
>
> The only non-obvious part is pic_poll_read which used
> "addr1 >> 7" to detect whether one referred to either
> the master or slave PIC. Instead, test this directly.
I've an unfinished queue here that, among other things, took
On 09/12/2011 07:29 AM, Avi Kivity wrote:
On 09/12/2011 01:50 PM, Avi Kivity wrote:
git://github.com/avikivity/qemu.git memory/batch
More of the same. I tested what I could using the images on the qemu
wiki -
note not all images boot even on upstream.
Whoops - don't pull - bad patch in there
On 09/12/2011 03:57 PM, Anthony Liguori wrote:
On 09/12/2011 07:29 AM, Avi Kivity wrote:
On 09/12/2011 01:50 PM, Avi Kivity wrote:
git://github.com/avikivity/qemu.git memory/batch
More of the same. I tested what I could using the images on the qemu
wiki -
note not all images boot even on upstr
Hi
Please send in any agenda items you are interested in covering.
Thanks, Juan.
i8259 is an ISA device (or at least, depends on the ISA infrastructure to
register its ioport); and the ISA bus is supplied by piix4. Later patches
make this dependency explicit.
Move the i8259 initialization until after the ISA bus is created; and supply
a new qemu_irq to PCI initialization, sin
On 09/12/2011 08:07 AM, Juan Quintela wrote:
Hi
Please send in any agenda items you are interested in covering.
- Device state visualization
Regards,
Anthony Liguori
Thanks, Juan.
On 2011-09-12 15:12, Anthony Liguori wrote:
> On 09/12/2011 08:07 AM, Juan Quintela wrote:
>> Hi
>>
>> Please send in any agenda items you are interested in covering.
>
> - Device state visualization
Wow, still that controversial?
Reminds me that you asked me for some visitor adaption I haven'
On 09/12/2011 08:15 AM, Jan Kiszka wrote:
On 2011-09-12 15:12, Anthony Liguori wrote:
On 09/12/2011 08:07 AM, Juan Quintela wrote:
Hi
Please send in any agenda items you are interested in covering.
- Device state visualization
Wow, still that controversial?
No, I just wanted to chat a
Obsoleted by f64e02b6cc.
Signed-off-by: Jan Kiszka
---
hw/pci_internals.h |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/hw/pci_internals.h b/hw/pci_internals.h
index c7fd23d..10b4adf 100644
--- a/hw/pci_internals.h
+++ b/hw/pci_internals.h
@@ -24,7 +24,6 @@ struct PCIB
Hi Folks,
Still seeking your guidance on this. Appreciate any pointers you may have.
Thanks much.
-a
On Fri, Sep 9, 2011 at 11:28 AM, al pat wrote:
>
> We are doing an experiment with kvm-clock to validate its effectiveness,
> particularly when running NTP on the host to make sure the host’s c
On 2011-09-12 14:54, Jan Kiszka wrote:
> On 2011-09-12 12:50, Avi Kivity wrote:
>> From: Richard Henderson
>>
>> The only non-obvious part is pic_poll_read which used
>> "addr1 >> 7" to detect whether one referred to either
>> the master or slave PIC. Instead, test this directly.
>
> I've an unf
On 09/12/2011 06:07 AM, Avi Kivity wrote:
On 09/11/2011 02:38 PM, Alexander Graf wrote:
Am 11.09.2011 um 12:41 schrieb Avi Kivity:
> On 09/08/2011 07:54 PM, Alexander Graf wrote:
>> PS: Please test your patches. This one could have been found with
an invocation
>> as simple as "qemu-system-ppc"
On 09/12/2011 04:46 PM, Lucas Meneghel Rodrigues wrote:
On 09/12/2011 06:07 AM, Avi Kivity wrote:
On 09/11/2011 02:38 PM, Alexander Graf wrote:
Am 11.09.2011 um 12:41 schrieb Avi Kivity:
> On 09/08/2011 07:54 PM, Alexander Graf wrote:
>> PS: Please test your patches. This one could have been f
Am 08.09.2011 17:24, schrieb Paolo Bonzini:
> Signed-off-by: Paolo Bonzini
> ---
> nbd.c |2 ++
> nbd.h | 11 ++-
> 2 files changed, 12 insertions(+), 1 deletions(-)
Which upstream? I can't find any NBD version that defines a command/flag
for TRIM.
Kevin
The following changes since commit 44520db10b1b92f272348ab7028e7afc68ac3edf:
Gdbstub: Fix back-trace on SPARC32 (2011-09-10 18:12:35 +)
are available in the git repository at:
git://repo.or.cz/qemu/kevin.git for-anthony
Frediano Ziglio (4):
qcow2: removed unused depends_on field
From: Markus Armbruster
We already track it in BlockDriverState. Just like tray open/close
state, we should track it in the device models instead, because it's
device state.
Signed-off-by: Markus Armbruster
Signed-off-by: Kevin Wolf
---
hw/scsi-disk.c |4 +++-
1 files changed, 3 insertio
From: Markus Armbruster
BlockDriverState member buffer_alignment is initially 512. The device
model may set them, with bdrv_set_buffer_alignment(). If the device
model gets detached (hot unplug), the device's alignment is left
behind. Only okay because device hot unplug automatically destroys
From: Markus Armbruster
While there, make the locked parameter bool.
Signed-off-by: Markus Armbruster
Signed-off-by: Kevin Wolf
---
block.c |8
block.h |2 +-
block/raw-posix.c |8
block/raw.c |6 +++---
block_int.h |2 +-
From: Markus Armbruster
Don't fail when tray is already open.
Signed-off-by: Markus Armbruster
Signed-off-by: Kevin Wolf
---
hw/scsi-bus.c | 10 ++
hw/scsi-disk.c | 15 +++
hw/scsi.h |4
3 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/hw/
From: Markus Armbruster
change fails while the tray is locked by the guest. eject -f forces
it open and removes any media. Unfortunately, the tray closes again
instantly. Since the lock remains as it is, there is no way to insert
another medium unless the guest voluntarily unlocks.
Fix by lea
From: Frediano Ziglio
QCowL2Meta::offset is not cluster aligned but only sector aligned
however nb_clusters count cluster from cluster start.
This fix range check. Note that old code have no corruption issues
related to this check cause it only cause intersection to occur
when shouldn't.
Signed-
Note that I assumed qemu-img runs in a single context (like qemu), and
there are no concurrency issues. If that's not the case, the callback,
error handling need to be fixed.
Yehuda
On Mon, Sep 12, 2011 at 7:26 AM, Yehuda Sadeh wrote:
> In order to improve image conversion process, instead of sy
From: Markus Armbruster
We already track it in BlockDriverState since commit 4be9762a. As
discussed in that commit's message, we should track it in the device
device models instead, because it's device state.
Signed-off-by: Markus Armbruster
Signed-off-by: Kevin Wolf
---
hw/scsi-disk.c |
Fix a number of bugs in the implementation of writes to the CM_CTRL
system register:
* write to cm_ctrl, not cm_init !
* an '&' vs '^' typo meant we would write the inverse of the bits
* handling the LED via printf() meant we spew lots of output
to stdout when Linux uses the LED as a heartbea
From: Markus Armbruster
MMC-5 6.40.2.6 specifies that START STOP UNIT succeeds when the drive
already has the requested state. cmd_start_stop_unit() fails when
asked to eject while the tray is open and locked. Fix that.
Signed-off-by: Markus Armbruster
Signed-off-by: Kevin Wolf
---
hw/ide/a
This patch series adds support for block conversion to the qed driver.
This depends on my precivious block conversion api series
Devin Nakamura (6):
qed: add qed_find_cluster_sync()
qed: add bdrv_qed_get_conversion_options()
qed: add open_conversion_target()
qed: add qed_bdrv_get_mapping()
Signed-off-by: Devin Nakamura
---
block/qed-cluster.c | 33 +
block/qed.h |4
2 files changed, 37 insertions(+), 0 deletions(-)
diff --git a/block/qed-cluster.c b/block/qed-cluster.c
index f64b2af..6e68ba7 100644
--- a/block/qed-cluster.c
+++ b
Signed-off-by: Devin Nakamura
---
block/qed.c | 57 +
1 files changed, 57 insertions(+), 0 deletions(-)
diff --git a/block/qed.c b/block/qed.c
index 16320f5..93827db 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -1456,6 +1456,62 @@ stati
1 - 100 of 183 matches
Mail list logo
