On 10/05/2019 15.59, Christian Borntraeger wrote:
> Shall we cc stable this?
I think I'd rather not do it unless someone really speaks up that they
urgently need it. If we could use the binary from the master branch, I'd
say go for it, but in this case we'd need to build a separate
s390-ccw.img fo
On 10/05/2019 22.34, Richard Henderson wrote:
> For linux-user, there is no need to add slirp to the set of
> git modules checked out, nor build it.
>
> This also avoids a makefile bug wrt insufficient dependencies
> on subdir-slirp. If slirp/ is not initially present, the
> dependencies that che
** Tags added: ppc
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1828507
Title:
qemu-system-ppc64 smp crash on manual reset
Status in QEMU:
New
Bug description:
Host Environment:
x86_64
> >
> > Hi Dan,
> >
> > Thank you for the review. Please see my reply inline.
> >
> > >
> > > Hi Pankaj,
> > >
> > > Some minor file placement comments below.
> >
> > Sure.
> >
> > >
> > > On Thu, Apr 25, 2019 at 10:02 PM Pankaj Gupta wrote:
> > > >
> > > > This patch adds virtio-pmem driver for
> > > >
> > > > This patch adds 'DAXDEV_SYNC' flag which is set
> > > > for nd_region doing synchronous flush. This later
> > > > is used to disable MAP_SYNC functionality for
> > > > ext4 & xfs filesystem for devices don't support
> > > > synchronous flush.
> > > >
> > > > Signed-off-by: Pankaj
> >
> > This patch adds 'DAXDEV_SYNC' flag which is set
> > for nd_region doing synchronous flush. This later
> > is used to disable MAP_SYNC functionality for
> > ext4 & xfs filesystem for devices don't support
> > synchronous flush.
> >
> > Signed-off-by: Pankaj Gupta
> > ---
> > drivers/dax
On Fri, May 10, 2019 at 5:45 PM Pankaj Gupta wrote:
>
>
>
> > >
> > > This patch adds 'DAXDEV_SYNC' flag which is set
> > > for nd_region doing synchronous flush. This later
> > > is used to disable MAP_SYNC functionality for
> > > ext4 & xfs filesystem for devices don't support
> > > synchronous
Peter Xu 于2019年5月11日周六 上午7:53写道：
> On Fri, May 10, 2019 at 09:43:46AM -0700, Li Qiang wrote:
> > Recently I am considering write a driver for edu device.
>
> I don't know why you wanted to write it, but there's one (though I
> don't even remember whether it's working or not)...
>
>
This is a simp
On Fri, May 10, 2019 at 07:59:43PM -0400, Michael S. Tsirkin wrote:
>I merged this will send pull request soon.
>
Ah, Thanks :-)
--
Wei Yang
Help you, Help me
I merged this will send pull request soon.
On Fri, May 10, 2019 at 09:22:10PM +, Wei Yang wrote:
> Hi, Igor
>
> You would take this one? Or what should I do next?
>
> On Fri, Apr 19, 2019 at 08:30:47AM +0800, Wei Yang wrote:
> >This patch set tries to generalize MCFG table build process. And
On Fri, May 10, 2019 at 09:43:46AM -0700, Li Qiang wrote:
> Recently I am considering write a driver for edu device.
I don't know why you wanted to write it, but there's one (though I
don't even remember whether it's working or not)...
https://github.com/xzpeter/clibs/blob/master/gpl/linux_kernel
Signed-off-by: Wei Yang
---
migration/ram.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/migration/ram.c b/migration/ram.c
index 1def8122e9..720c2b73ca 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -888,7 +888,7 @@ struct {
*- to make easier to know
On Wed, May 8, 2019 at 4:19 AM Pankaj Gupta wrote:
>
>
> Hi Dan,
>
> Thank you for the review. Please see my reply inline.
>
> >
> > Hi Pankaj,
> >
> > Some minor file placement comments below.
>
> Sure.
>
> >
> > On Thu, Apr 25, 2019 at 10:02 PM Pankaj Gupta wrote:
> > >
> > > This patch adds vi
> >
> > Hi Michael & Dan,
> >
> > Please review/ack the patch series from LIBNVDIMM & VIRTIO side.
> > We have ack on ext4, xfs patches(4, 5 & 6) patch 2. Still need
> > your ack on nvdimm patches(1 & 3) & virtio patch 2.
>
> I was planning to merge these via the nvdimm tree, not ack them. D
If the bitmap can't be used for whatever reason, we skip putting down
the reference. Fix that.
In practice, this means that if you attempt to gracefully exit QEMU
after a backup command being rejected, bdrv_close_all will fail and
tell you some unpleasant things via assert().
Reported-by: aihua l
On Sat, May 11, 2019 at 12:19 AM Max Reitz wrote:
> It is possible for an empty file to take up blocks on a filesystem.
> Make iotest 175 take this into account.
>
> Reported-by: Thomas Huth
> Signed-off-by: Max Reitz
> ---
> tests/qemu-iotests/175 | 15 +++
> tests/qemu-iotest
Hi, Igor
You would take this one? Or what should I do next?
On Fri, Apr 19, 2019 at 08:30:47AM +0800, Wei Yang wrote:
>This patch set tries to generalize MCFG table build process. And it is
>based on one un-merged patch from Igor, which is included in this serials.
>
>v3->v4:
>* adjust commen
It is possible for an empty file to take up blocks on a filesystem.
Make iotest 175 take this into account.
Reported-by: Thomas Huth
Signed-off-by: Max Reitz
---
tests/qemu-iotests/175 | 15 +++
tests/qemu-iotests/175.out | 8
2 files changed, 15 insertions(+), 8 delet
On Sat, May 4, 2019 at 12:32 AM Nir Soffer wrote:
>
>
> On Fri, May 3, 2019, 23:21 Eric Blake wrote:
>
>> ...
>> >>> == creating image with preallocation off ==
>> >>> Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
>> preallocation=off
>> >>> -size=1048576, blocks=0
>> >>> +size=10485
XFS_IOC_ZERO_RANGE does not increase the file length:
$ touch foo
$ xfs_io -c 'zero 0 65536' foo
$ stat -c "size=%s, blocks=%b" foo
size=0, blocks=128
We do want writes beyond the EOF to automatically increase the file
length, however. This is evidenced by the fact that iotest 061 is
broken on XF
We mandate that the source node must be a root node; but there's no reason
I am aware of that it needs to be restricted to such. In some cases, we need
to make sure that there's a medium present, but in the general case we can
allow the backup job itself to do the graph checking.
This patch helps
On Tue, May 7, 2019 at 5:32 PM Richard Henderson
wrote:
>
> This changes the code generation for the tlb from e.g.
>
> ldr ip, [r6, #-0x10]
> ldr r2, [r6, #-0xc]
> and ip, ip, r4, lsr #8
> ldrd r0, r1, [r2, ip]!
> ldr r2, [r2, #0x18]
On Tue, May 7, 2019 at 5:34 PM Richard Henderson
wrote:
>
> There was nothing armv7 specific about the bic+cmp sequence, however
> looking at the set of guests more closely shows that the 8-bit immediate
> operand for the bic can only be satisfied with one guest in tree:
> baseline m-profile -- 10
On Tue, May 7, 2019 at 5:29 PM Richard Henderson
wrote:
>
> This changes the code generation for the tlb from e.g.
>
> ldur x0, [x19, #0xffe0]
> ldur x1, [x19, #0xffe8]
> and x0, x0, x20, lsr #8
> add x1, x1, x0
> ld
On Tue, May 7, 2019 at 5:32 PM Richard Henderson
wrote:
>
> This macro is now always empty, so remove it. This leaves the
> entire contents of CPUArchState under the control of the guest
> architecture.
>
> Reviewed-by: Peter Maydell
> Signed-off-by: Richard Henderson
Reviewed-by: Alistair Fra
On Tue, May 7, 2019 at 5:29 PM Richard Henderson
wrote:
>
> We have for some time had code within the tcg backends to
> handle large positive offsets from env. This move makes
> sure that need not happen. Indeed, we are able to assert
> at build time that simple offsets suffice for all hosts.
>
On Tue, May 7, 2019 at 9:48 AM Philippe Mathieu-Daudé wrote:
>
> As explained in commit aff39be0ed97:
>
> Both functions, object_initialize() and object_property_add_child()
> increase the reference counter of the new object, so one of the
> references has to be dropped afterwards to get the
On Tue, May 7, 2019 at 9:52 AM Philippe Mathieu-Daudé wrote:
>
> As explained in commit aff39be0ed97:
>
> Both functions, object_initialize() and object_property_add_child()
> increase the reference counter of the new object, so one of the
> references has to be dropped afterwards to get the
On Tue, May 7, 2019 at 9:46 AM Philippe Mathieu-Daudé wrote:
>
> As explained in commit aff39be0ed97:
>
> Both functions, object_initialize() and object_property_add_child()
> increase the reference counter of the new object, so one of the
> references has to be dropped afterwards to get the
On Tue, May 7, 2019 at 9:39 AM Philippe Mathieu-Daudé wrote:
>
> The Inter Processor Interrupt is a block part of the SoC, not the
> "machine" (See Zynq UltraScale+ Device TRM UG1085, "Platform
> Management Unit", Power Domains and Islands).
>
> Move the IPI management from the machine to the SoC.
On Tue, May 7, 2019 at 9:43 AM Philippe Mathieu-Daudé wrote:
>
> The Inter Processor Interrupt is a block part of the SoC, not the
> "machine" (talking about machine is borderline with the PMU, since
> it is embedded into the ZynqMP SoC, but currentl QEMU doesn't
> support multi-arch cores).
>
> M
On Tue, May 7, 2019 at 9:47 AM Philippe Mathieu-Daudé wrote:
>
> As explained in commit aff39be0ed97:
>
> Both functions, object_initialize() and object_property_add_child()
> increase the reference counter of the new object, so one of the
> references has to be dropped afterwards to get the
For linux-user, there is no need to add slirp to the set of
git modules checked out, nor build it.
This also avoids a makefile bug wrt insufficient dependencies
on subdir-slirp. If slirp/ is not initially present, the
dependencies that check it out are associated with softmmu,
which then generate
On Thu, May 09, 2019 at 06:36:18PM +0200, Jiri Denemark wrote:
> On Thu, May 09, 2019 at 18:06:03 +0200, Igor Mammedov wrote:
> > On Thu, 9 May 2019 10:56:17 -0300
> > Eduardo Habkost wrote:
> >
> > > On Thu, May 09, 2019 at 03:35:37PM +0200, Jiri Denemark wrote:
> > > > Would this unavailable-fe
On 10/05/19 03:20, Thomas Huth wrote:
> The Makefile tries to include device Kconfig dependencies via
>
> -include $(SUBDIR_DEVICES_MAK_DEP)
>
> and thus expects files that match *-softmmu/config-devices.mak.d ...
> However, the minikconf script currently generates files a la
> "*-softmmu-config
On Fri, May 10, 2019 at 01:33:03PM +0200, Jiri Denemark wrote:
> On Thu, May 09, 2019 at 13:08:25 -0300, Eduardo Habkost wrote:
> > On Thu, May 09, 2019 at 05:26:16PM +0200, Jiri Denemark wrote:
> > > On Thu, May 09, 2019 at 10:56:17 -0300, Eduardo Habkost wrote:
> > > > On Thu, May 09, 2019 at 03:
On Tue, May 7, 2019 at 9:36 AM Philippe Mathieu-Daudé wrote:
>
> As explained in commit aff39be0ed97:
>
> Both functions, object_initialize() and object_property_add_child()
> increase the reference counter of the new object, so one of the
> references has to be dropped afterwards to get the
On Fri, May 10, 2019 at 8:52 AM Pankaj Gupta wrote:
>
> Hi Michael & Dan,
>
> Please review/ack the patch series from LIBNVDIMM & VIRTIO side.
> We have ack on ext4, xfs patches(4, 5 & 6) patch 2. Still need
> your ack on nvdimm patches(1 & 3) & virtio patch 2.
I was planning to merge these v
On Fri, May 10, 2019 at 8:53 AM Pankaj Gupta wrote:
>
> This patch adds 'DAXDEV_SYNC' flag which is set
> for nd_region doing synchronous flush. This later
> is used to disable MAP_SYNC functionality for
> ext4 & xfs filesystem for devices don't support
> synchronous flush.
>
> Signed-off-by: Pank
From: Richard Henderson
Going to approach this problem via __attribute__((always_inline))
instead, but full conversion will take several steps.
Signed-off-by: Richard Henderson
Signed-off-by: Alex Bennée
Tested-by: Mark Cave-Ayland
diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index 9
From: Richard Henderson
Having this in io_readx/io_writex meant that we forgot to
re-compute index after tlb_fill. It also means we can use
the normal aligned memory load path. It also fixes a bug
in that we had cached a use of index across a tlb_fill.
Signed-off-by: Richard Henderson
Signed-
The following changes since commit a6ae23831b05a11880b40f7d58e332c45a6b04f7:
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request'
into staging (2019-05-03 15:26:09 +0100)
are available in the Git repository at:
https://github.com/stsquad/qemu.git tags/pull-demacro-s
Instead of expanding a series of macros to generate the load/store
helpers we move stuff into common functions and rely on the compiler
to eliminate the dead code for each variant.
Signed-off-by: Alex Bennée
Tested-by: Mark Cave-Ayland
diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index
From: Richard Henderson
If we attempt to recurse from load_helper back to load_helper,
even via intermediary, we do not get all of the constants
expanded away as desired.
But if we recurse back to the original helper (or a shim that
has a consistent function signature), the operands are folded
a
From: Richard Henderson
This is less tricky than for loads, because we always fall
back to single byte stores to implement unaligned stores.
Signed-off-by: Richard Henderson
Signed-off-by: Alex Bennée
Tested-by: Mark Cave-Ayland
diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index e4d0
* Richard Henderson (richard.hender...@linaro.org) wrote:
> On 5/10/19 11:56 AM, Eduardo Habkost wrote:
> > hmp_gva2gpa() calls mon_get_cpu() twice, which is unnecessary.
> > Not an actual bug, but this is reported as a defect by Coverity
> > Scan (CID 1401346).
> >
> > Signed-off-by: Eduardo Habk
On 5/10/19 11:56 AM, Eduardo Habkost wrote:
> hmp_gva2gpa() calls mon_get_cpu() twice, which is unnecessary.
> Not an actual bug, but this is reported as a defect by Coverity
> Scan (CID 1401346).
>
> Signed-off-by: Eduardo Habkost
> ---
> monitor.c | 3 +--
> 1 file changed, 1 insertion(+), 2 d
From: "Dr. David Alan Gilbert"
Coverity is complaining that while I'm checking the return
value of mon_get_cpu(), I'm not actually using the checked value,
I'm calling it again and thus it's worried I might get null;
I don't think that's actually possible since i'm under
lock anyway.
However, it'
Signed-off-by: John Snow
---
tests/qemu-iotests/250 | 129 +
tests/qemu-iotests/250.out | 119 ++
tests/qemu-iotests/group | 1 +
3 files changed, 249 insertions(+)
create mode 100755 tests/qemu-iotests/250
create mode
Don't pull events out of the queue that don't belong to us;
be choosier so that we can use this method to drive jobs that
were launched by transactions that may have more jobs.
Signed-off-by: John Snow
---
tests/qemu-iotests/iotests.py | 32 +++-
1 file changed, 15 in
This is a clean-up of the semihosting calls after reading ver 2.0 of
the specification. There are a number of small fixes that seemed too
insignificant to split into smaller patches:
- add reference to the ARM semihosting spec
- add some additional commentary on return values
- fixup block c
See patch one's commit message for justification.
v2: added patch 4, with iotest framework adjustments in patches 2/3.
John Snow (4):
blockdev-backup: don't check aio_context too early
iotests.py: do not use infinite waits
iotests.py: rewrite run_job to be pickier
iotests: add iotest 250
Cap waits to 60 seconds so that iotests can fail gracefully if something
goes wrong.
Signed-off-by: John Snow
---
tests/qemu-iotests/iotests.py | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/tests/qemu-iotests/iotests.py b/tests/qemu-iotests/iotests.py
index f
in blockdev_backup_prepare, we check to make sure that the target is
associated with a compatible aio context. However, do_blockdev_backup is
called later and has some logic to move the target to a compatible
aio_context. The transaction version will fail certain commands
needlessly early as a resu
hmp_gva2gpa() calls mon_get_cpu() twice, which is unnecessary.
Not an actual bug, but this is reported as a defect by Coverity
Scan (CID 1401346).
Signed-off-by: Eduardo Habkost
---
monitor.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/monitor.c b/monitor.c
index bb4899
Note that env->pc is removed from the qemu_log as that value is garbage.
The PC isn't recovered until cpu_restore_state, called from
cpu_loop_exit_restore, called from riscv_raise_exception.
Cc: qemu-ri...@nongnu.org
Cc: Palmer Dabbelt
Reviewed-by: Alistair Francis
Signed-off-by: Richard Henders
Most of the existing users would continue around a loop which
would fault the tlb entry in via a normal load/store.
But for AArch64 SVE we have an existing emulation bug wherein we
would mark the first element of a no-fault vector load as faulted
(within the FFR, not via exception) just because we
Cc: qemu-s3...@nongnu.org
Cc: Cornelia Huck
Reviewed-by: David Hildenbrand
Signed-off-by: Richard Henderson
---
target/s390x/internal.h| 5 +--
target/s390x/cpu.c | 5 ++-
target/s390x/excp_helper.c | 73 ++
target/s390x/mem_helper.c | 16 -
Cc: qemu-...@nongnu.org
Reviewed-by: Peter Maydell
Signed-off-by: Richard Henderson
---
target/arm/internals.h | 10 +++--
target/arm/cpu.c | 22 +-
target/arm/helper.c| 98 ++
target/arm/op_helper.c | 29 ++---
4 files changed, 7
We do not support probing, but we do not need it yet either.
Cc: Paolo Bonzini
Cc: Eduardo Habkost
Reviewed-by: Peter Maydell
Signed-off-by: Richard Henderson
---
target/i386/cpu.h | 5 ++--
target/i386/cpu.c | 5 ++--
target/i386/excp_helper.c | 61 +
github.com/rth7680/qemu.git tags/pull-tcg-20190510
for you to fetch changes up to 4811e9095c0491bc6f5450e5012c9c4796b9e59d:
tcg: Use tlb_fill probe from tlb_vaddr_to_host (2019-05-10 11:12:50 -0700)
Add CPUClass::tlb_fil
Note that env->active_tc.PC is removed from the qemu_log as that value
is garbage. The PC isn't recovered until cpu_restore_state, called from
cpu_loop_exit_restore, called from do_raise_exception_err.
Cc: Aleksandar Markovic
Cc: Aleksandar Rikalo
Reviewed-by: Philippe Mathieu-Daudé
Signed-off
Cc: qemu-...@nongnu.org
Acked-by: David Gibson
Reviewed-by: Peter Maydell
Signed-off-by: Richard Henderson
---
target/ppc/cpu.h| 7 +++
target/ppc/mmu_helper.c | 22 +-
target/ppc/translate_init.inc.c | 5 ++---
target/ppc/user_only_helper.c |
Launchpad has imported 9 comments from the remote bug at
https://bugs.freedesktop.org/show_bug.cgi?id=102475.
If you reply to an imported comment from within Launchpad, your comment
will be sent to the remote bug automatically. Read more about
Launchpad's inter-bugtracker facilities at
https://hel
Add support for Linux I2C character device for I2C device passthrough
For example:
-chardev i2c,address=0x46,path=/dev/i2c-N,id=i2c-chardev
QEMU supports emulation of I2C devices in software but currently can't
passthrough to real I2C devices. This feature is needed by developers
using QEMU for wr
available in the Git repository at:
>
> https://github.com/rth7680/qemu.git tags/pull-tcg-20190510
>
> for you to fetch changes up to 5f32c102ec3a0db4773d0f74b398191b578c0720:
>
> tcg: Use tlb_fill probe
On 10.05.19 18:20, Thomas Huth wrote:
> On 10/05/2019 15.47, Max Reitz wrote:
>> On 10.05.19 15:36, Thomas Huth wrote:
>>> On 10/05/2019 15.34, Max Reitz wrote:
On 10.05.19 06:29, Thomas Huth wrote:
> On 09/05/2019 20.08, Max Reitz wrote:
>> On 02.05.19 10:45, Thomas Huth wrote:
>>
On 10.05.19 18:42, Thomas Huth wrote:
> On 10/05/2019 15.54, Max Reitz wrote:
>> On 28.04.19 17:18, Thomas Huth wrote:
>>> QEMU iotest 175 is failing for me when I run it with -raw:
>>>
>>> $ ./check -raw 175
>>> QEMU --
>>> "/home/thuth/tmp/qemu-build/tests/qemu-iotests/../../x86_64-softm
We now have an interface for guest visible random numbers.
Acked-by: David Gibson
Reviewed-by: Laurent Vivier
Signed-off-by: Richard Henderson
---
v5: Do not loop for darn64; use sizeof.
---
target/ppc/int_helper.c | 39 +++
1 file changed, 27 insertions(+),
Generating a random number counts as I/O, as it cannot be
replayed and produce the same results.
Cc: David Gibson
Suggested-by: Peter Maydell
Signed-off-by: Richard Henderson
---
target/ppc/translate.c | 21 +++--
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/t
Reviewed-by: Peter Maydell
Signed-off-by: Richard Henderson
---
v3: Log errors with -d unimp, for lack of a better flag.
v6: Add ARM_CP_IO for -icount.
---
target/arm/cpu.h| 5 +
target/arm/cpu64.c | 1 +
target/arm/helper.c | 44
3 files c
On Thu, May 09, 2019 at 02:00:56PM +0100, Stefan Hajnoczi wrote:
> On Sat, May 04, 2019 at 07:11:19PM +0100, Ernest Esene wrote:
> > Add support for Linux I2C character device for I2C device passthrough
> > For example:
> > -chardev linux-i2c,address=0x46,path=/dev/i2c-N,id=i2c-chardev
>
> There i
We no longer use rand() within linux-user.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Signed-off-by: Richard Henderson
---
linux-user/main.c | 11 ---
1 file changed, 11 deletions(-)
diff --git a/linux-user/main.c b/linux-user/main.c
index e455bff1b7..5d1c6a115b 1
On Fri, 10 May 2019 at 18:18, Mark Cave-Ayland
wrote:
>
> On 10/05/2019 17:49, Peter Maydell wrote:
> > The comment above this bit of code says:
> >
> > # Caution: do not add files or directories here using wildcards. This
> > # will result in problems later if a new file matching the wildcard is
The random number is intended for use by the guest. As such, we should
honor the -seed argument for reproducibility. Use the *_nofail routine
instead of error_abort directly.
Cc: qemu-...@nongnu.org
Reviewed-by: Laurent Vivier
Reviewed-by: Joel Stanley
Signed-off-by: Richard Henderson
---
hw
Use a better interface for random numbers than rand() * 3.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Signed-off-by: Richard Henderson
---
linux-user/aarch64/target_syscall.h | 2 --
linux-user/aarch64/cpu_loop.c | 29 ++-
linux-user/syscall.
When the -seed option is given, call qemu_guest_random_seed_main,
putting the subsystem into deterministic mode. Pass derived seeds
to each cpu created during clone; which is a no-op unless the
subsystem is in deterministic mode.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
S
The random number is intended for use by the guest. As such, we should
honor the -seed argument for reproducibility. Use the *_nofail routine
instead of rolling our own error handling locally.
Cc: qemu-...@nongnu.org
Cc: Andrew Baumann
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-
We will shortly need this in the user-only binaries, so drop the split
into system and tools binaries. Remove crypto-obj-y and crypto-aes-obj-y,
moving the objects into util-obj-y.
Reviewed-by: Laurent Vivier
Reviewed-by: Daniel P. Berrangé
Signed-off-by: Richard Henderson
---
v6: Remove a str
Avoids leaking the /dev/urandom fd into any child processes.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Reviewed-by: Daniel P. Berrangé
Signed-off-by: Richard Henderson
---
crypto/random-platform.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/cr
Prefer it to direct use of /dev/urandom.
Reviewed-by: Laurent Vivier
Reviewed-by: Daniel P. Berrangé
Signed-off-by: Richard Henderson
---
v3: If getrandom is not present, fall back on /dev/(u)random.
---
crypto/random-platform.c | 37 -
configure
Use a better interface for random numbers than rand().
Fail gracefully if for some reason we cannot use the crypto system.
Reviewed-by: Philippe Mathieu-Daudé
Reviewed-by: Gerd Hoffmann
Reviewed-by: Daniel P. Berrangé
Signed-off-by: Richard Henderson
---
v2: Use qcrypto_random_bytes, not qemu_
The random number is intended for use by the guest. As such, we should
honor the -seed argument for reproducibility.
Cc: qemu-...@nongnu.org
Cc: Igor Mitsyanko
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Signed-off-by: Richard Henderson
---
hw/misc/exynos4210_rng.c | 11 +
The random number is intended for use by the guest. As such, we should
honor the -seed argument for reproducibility. Use the *_nofail routine
instead of rolling our own error handling locally.
Cc: qemu-...@nongnu.org
Cc: Andrew Jeffery
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-
We now have an interface for guest visible random numbers.
Cc: Paolo Bonzini
Reviewed-by: Eduardo Habkost
Signed-off-by: Richard Henderson
---
v6: Add gen_io_start/end for -icount.
---
target/i386/helper.h | 2 ++
target/i386/cpu.c| 5 ++--
target/i386/int_helper.c | 21 +
Use a better interface for random numbers than rand * 16.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Signed-off-by: Richard Henderson
---
linux-user/elfload.c | 8 +++-
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/linux-user/elfload.c b/linux-user/elfl
This routine is intended to produce high-quality random numbers to the
guest. Normally, such numbers are crypto quality from the host, but a
command-line option can force the use of a fully deterministic sequence
for use while debugging.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-
When the -seed option is given, call qemu_guest_random_seed_main,
putting the subsystem into deterministic mode. Pass derived seeds
to each cpu created; which is a no-op unless the subsystem is in
deterministic mode.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Reviewed-by: D
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Signed-off-by: Richard Henderson
---
linux-user/main.c | 29 -
1 file changed, 20 insertions(+), 9 deletions(-)
diff --git a/linux-user/main.c b/linux-user/main.c
index 7e704845c0..e455bff1b7 100644
---
This allows us to use a single syscall to initialize them all.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Signed-off-by: Richard Henderson
---
target/arm/cpu.h | 12 +++-
linux-user/aarch64/cpu_loop.c | 6 +-
linux-user/syscall.c | 10 +++
There were 3 copies of this code, one of which used the wrong
data size for the failure indicator.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Reviewed-by: Gerd Hoffmann
Reviewed-by: Daniel P. Berrangé
Signed-off-by: Richard Henderson
---
ui/vnc.c | 37 +++
Using uint8_t* merely requires useless casts for use with
other types to be filled with randomness.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Reviewed-by: Daniel P. Berrangé
Signed-off-by: Richard Henderson
---
include/crypto/random.h | 2 +-
crypto/random-gcrypt.c |
We can always get EINTR for read; /dev/urandom is no exception.
Rearrange the order of tests for likelihood; allow degenerate buflen==0
case to perform a no-op zero-length read. This means that the normal
success path is a straight line with a single test for success.
Reviewed-by: Laurent Vivier
Use #ifdef _WIN32 instead of #ifndef _WIN32.
This will make other tests easier to sequence.
Reviewed-by: Laurent Vivier
Reviewed-by: Philippe Mathieu-Daudé
Reviewed-by: Daniel P. Berrangé
Signed-off-by: Richard Henderson
---
crypto/random-platform.c | 35 +--
1
At least ubuntu 18.04 does not package static gnutls libraries.
At least Fedora 30 does not ship static nettle and gcrypt libraries.
Tested-by: Laurent Vivier
Reviewed-by: Laurent Vivier
Reviewed-by: Daniel P. Berrangé
Signed-off-by: Richard Henderson
---
v5: Include nettle, gcrypt.
---
confi
Only the new patch 24 lacks review.
Changes since v5:
* Merge crypto-obj-y into util-obj-y (patch 2).
* Fix leftover crypto-obj-aes-y reference (patch 2).
* Add ARM_CP_IO to the RNG registers (patch 22).
* Issue gen_io_start/end around ppc DARN (new patch 24).
* Issue gen_io_start/end ar
On Fri, May 10, 2019 at 02:17:11PM -0300, Eduardo Habkost wrote:
> On Fri, May 10, 2019 at 11:29:53AM +0200, Markus Armbruster wrote:
> [...]
> > I'm afraid our command line is awkward both for machines and for humans,
> > albeit for different reasons.
> >
> > For humans doing simple things, the c
On Fri, May 10, 2019 at 11:29:53AM +0200, Markus Armbruster wrote:
[...]
> >> >> > We could extend QAPI introspection to return that if necessary,
> >> >> > right?
> >> >>
> >> >> I'm confident we can come up with *something*. It might kill the neat
> >> >> and simple "use QAPI features to commun
On 10/05/2019 17:49, Peter Maydell wrote:
> On Fri, 10 May 2019 at 17:37, Mark Cave-Ayland
> wrote:
>>
>> Make sure that we include *.ndrv files with those being copied to sharedir
>> during out-of-tree builds. This ensures that the MacOS driver is correctly
>> located and loaded by qemu-system-p
On Fri, May 10, 2019 at 12:55:18PM -0400, Michael S. Tsirkin wrote:
> On Fri, May 10, 2019 at 05:25:54PM +0100, Daniel P. Berrangé wrote:
> > On Fri, May 10, 2019 at 12:21:19PM -0400, Michael S. Tsirkin wrote:
> > > On Fri, May 10, 2019 at 05:16:44PM +0100, Daniel P. Berrangé wrote:
> > > > On Fri,
1 - 100 of 361 matches
Mail list logo
