The second patch, that is reverted (first):
`thermal: trip: Drop lockdep assertion from thermal_zone_trip_id()`
only touches code introduced by the first patch.
The first patch causes the following Oops (reproduced on an old
HP DL380 G8):
```
[2.960519] ACPI: button: Power Button [PWRF]
[2.
By matching the resulting json to be passed to the low level installer
against known good ones.
The environment info was gathered from one of our AMD Epyc Rome test
servers to have a realistic starting point.
Signed-off-by: Aaron Lauterer
---
proxmox-auto-installer/tests/parse-answer.rs | 106
Am 05/04/2024 um 11:27 schrieb Stoiko Ivanov:
> The second patch, that is reverted (first):
> `thermal: trip: Drop lockdep assertion from thermal_zone_trip_id()`
> only touches code introduced by the first patch.
> The first patch causes the following Oops (reproduced on an old
> HP DL380 G8):
> ``
I've tested mostly the same things as for v3 [0], to confirm nothing
broke since that:
- Using a few different values for `global` options
- Install on ext4, xfs, Btrfs RAID1 and ZFS RAID10
(with different values in multiple runs)
- Using DHCP and static IP
- Fetching answer from a partition
- F
Thanks for the review!
On 04/04/2024 17:20, Thomas Lamprecht wrote:
> Am 30/01/2024 um 18:10 schrieb Friedrich Weber:
>
> Maybe start of with "Add a helper to abort all tasks from a specific
> (type, user, vmid) tuple. It will be used ...
Will do.
>> This helper is used to abort any active qmsh
On 04/04/2024 17:26, Thomas Lamprecht wrote:
> Oh, and it might be worth mentioning explicitly in the next release notes,
> as it's a change in behavior that could theoretically throw up some
> tooling that depends on the $action not failing due to locking if the
> adapted endpoints returned – albe
If previously an IP was allocated in the IPAM, but a new subnet added
for the other IP version, we need to allocate an IP in the new subnet.
Signed-off-by: Stefan Lendl
Reviewed-by: Stefan Hanreich
Tested-by: Stefan Hanreich
---
src/PVE/Network/SDN/Vnets.pm | 10 --
1 file changed, 4 i
From: Stefan Hanreich
If DHCP is enabled on a zone with subnets, but no subnet has a
dhcp-range configured, then starting a VM will fail because no IP can
be allocated. This patch fixes this by only considering subnets that
have a dhcp-range configured and only failing if there is at least one
su
From: Stefan Hanreich
If DHCP is configured for IPv4 and IPv6, failing to obtain an IPv6 IP
does not roll back the allocation made for IPv4. This patch rolls back
any changes made in case of failure, so that IP allocation is actually
atomic.
Signed-off-by: Stefan Hanreich
Reviewed-by: Stefan Le
Extracted to a function so it can be mocked in tests.
Signed-off-by: Stefan Lendl
Reviewed-by: Max Carrara
Tested-by: Max Carrara
Reviewed-by: Stefan Hanreich
Tested-by: Stefan Hanreich
---
src/PVE/Network/SDN/Dhcp/Dnsmasq.pm | 7 ++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff
The datacenter_config() functions in SDN::Zones::Plugin is a simple
wrapper that reads datacenter.cfg via cfs.
This allows mocking datacenter.cfg in tests.
Signed-off-by: Stefan Lendl
Reviewed-by: Max Carrara
Tested-by: Max Carrara
Reviewed-by: Stefan Hanreich
Tested-by: Stefan Hanreich
---
create_etc_interfaces_sdn_dir creates the /etc/pve/sdn directory.
This allows mocking in tests to prevent system fs access in tests
Signed-off-by: Stefan Lendl
Reviewed-by: Max Carrara
Tested-by: Max Carrara
Reviewed-by: Stefan Hanreich
Tested-by: Stefan Hanreich
---
src/PVE/API2/Network/SDN
Specify the IP version (4|6) for which an IP shall be requested from the IPAM.
Signed-off-by: Stefan Lendl
Reviewed-by: Stefan Hanreich
Tested-by: Stefan Hanreich
---
src/PVE/Network/SDN/Subnets.pm | 2 +-
src/PVE/Network/SDN/Vnets.pm | 6 +++---
2 files changed, 4 insertions(+), 4 deletions
This add several tests for SDN VNets.
State setup as well as testing results is done only via the API to test on the
API boundaries and not against the internal state. Internal state and config
files are mocked to avoid requiring access to system files or pmxcfs.
The first 4 commits fix functional
systemctl_service() is a wrapper around PVE::Tools::run_command to allow
mocking the systemctl interactions in tests.
Signed-off-by: Stefan Lendl
Reviewed-by: Max Carrara
Tested-by: Max Carrara
Reviewed-by: Stefan Hanreich
Tested-by: Stefan Hanreich
---
src/PVE/Network/SDN/Dhcp/Dnsmasq.pm |
For mocking RPCEnvironment in sbuild.
Signed-off-by: Stefan Lendl
Reviewed-by: Stefan Hanreich
Tested-by: Stefan Hanreich
---
debian/control | 1 +
1 file changed, 1 insertion(+)
diff --git a/debian/control b/debian/control
index 6f0bbeb..1f97196 100644
--- a/debian/control
+++ b/debian/contr
The did not work and were primarily testing against internal state.
Signed-off-by: Stefan Lendl
Reviewed-by: Max Carrara
Tested-by: Max Carrara
Reviewed-by: Stefan Hanreich
Tested-by: Stefan Hanreich
---
src/test/run_test_vnets.pl | 343 -
1 file changed,
Add several tests for Vnets in test_vnets_blackbox. State setup as well
as testing results is done only via the API to test on the API
boundaries not not against the internal state. Internal state is mocked
to avoid requiring access to system files or pmxcfs.
Mocking is done by reading and writing
Extract the dbus based interactions with dnsmasq so that it can be
mocked in tests.
Signed-off-by: Stefan Lendl
Reviewed-by: Max Carrara
Tested-by: Max Carrara
Reviewed-by: Stefan Hanreich
Tested-by: Stefan Hanreich
---
src/PVE/Network/SDN/Dhcp/Dnsmasq.pm | 22 --
1 file
sent v3 which fixes also the broken tests.
___
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
This way, serde will throw errors if fields are not known.
This can help to reduce frustration if one might think to have set an
option, but for example a small type has happened.
Signed-off-by: Aaron Lauterer
---
Since Christoph mentioned it I tried to implement it. Tested quickly
with the prox
21 matches
Mail list logo
