On Feb 22, 2011, at 4:29 PM, Douglas Garstang wrote:
> Here's a weird one. I have a 2.6 server and a 0.24.8 client, and when I run
> the puppet client, any files that are being updated by puppet, are having
> their entire contents dumped to /var/log/messages. What's up with that?
>
> Doug
You
so even more wierdness
I moved the auth.conf and the namespaceauth.conf files on the
puppetmaster, restarted the puppetmaster daemon in debug
mode.and...
no error...not a single one -- puppetclients connect just fine, and
puppetrun works correctly...
I must be missing something here
Very interested! I am in the midst of rolling out a brand new collection of
servers, all Linux. This couldn't be more timely.
Thanks,
Dave Augustus
On Feb 22, 2011, at 6:20 PM, "Steve Shipway" wrote:
> I've created a Puppet module which will check a specified user for password
> age, and if i
On Tue, Feb 22, 2011 at 7:29 PM, Douglas Garstang
wrote:
> Here's a weird one. I have a 2.6 server and a 0.24.8 client, and when I run
> the puppet client, any files that are being updated by puppet, are having
> their entire contents dumped to /var/log/messages. What's up with that?
> Doug
Have
Hi, all; docs guy here. On account of the language tutorial not...
actually... being a tutorial, I've moved it to
http://docs.puppetlabs.com/guides/language_guide.html. There's a 302
in place, but since it's probably one of the more used pages, I
thought it'd be worth a quick mention anyway.
(And
Thank you, Felix. I will try.
On 2月22日, 午前12:49, Felix Frank
wrote:
> On 02/21/2011 05:39 AM, 暁華 管 wrote:
>
> > Hi,
>
> > I installed puppet 0.25.4 on ubuntu 10.04. It was ok until puppet
> > client and server were intalled. But when I tried to execute the
> > following command, the error, "Could
On Tue, Feb 22, 2011 at 5:09 PM, Jed wrote:
> ok so I did sometesting..
>
>
> apparently, this is how it breaks down so far...
>
> -PUPPET CLIENT-
> namespaceauth.conf: you need this or else it dies on startup
> auth.conf : you do not need this normally, however if you want to do a
> 'puppetrun'
ok so I did sometesting..
apparently, this is how it breaks down so far...
-PUPPET CLIENT-
namespaceauth.conf: you need this or else it dies on startup
auth.conf : you do not need this normally, however if you want to do a
'puppetrun' from the master->client, this files needs to be present
and y
Here's a weird one. I have a 2.6 server and a 0.24.8 client, and when I run
the puppet client, any files that are being updated by puppet, are having
their entire contents dumped to /var/log/messages. What's up with that?
Doug
--
You received this message because you are subscribed to the Google
I've just started to test existing Puppet modules with RHEL6. It seems that
several things have changed slightly, breaking the old RHEL5-tested modules
and requiring addition configuration to be added.
1. The syslod has changed to rsyslog, and the config files have altered.
This is the largest
I've created a Puppet module which will check a specified user for password
age, and if it is older than a specified amount, then it will first generate
a random password, change the user's password to this, and will then update
(or create) the stored password as held in the Secret Server applicati
From the docs:
auth.conf
rest_authconfig = $confdir/auth.conf
The auth.conf doesn't exist by default, but Puppet has some default
settings that will be put in place if you don't create an auth.conf. You'll
see these settings if you run your puppetmaster in debug
On Tue, Feb 22, 2011 at 2:58 PM, Jed wrote:
> Thanks Denmat...
>
> I've seen the page already, but its so vague...
>
> it doesnt mention anywhere what files belong where...
>
> I gather auth.conf would need to be on the puppetmaster...
>
> however, from what it says about namespaceauth.conf, it s
Yep Same version 2.6.4
It looks like the client crl.pem was causing this somehow. I just
emptied the file and it looks like its working fine.
Thx
On Feb 22, 2:01 pm, Denmat wrote:
> Are client and master at same version? What version are you using?
>
> On 23/02/2011, at 8:40, Roberto Bouza wro
Thanks Denmat...
I've seen the page already, but its so vague...
it doesnt mention anywhere what files belong where...
I gather auth.conf would need to be on the puppetmaster...
however, from what it says about namespaceauth.conf, it seems that
needs to live on the puppet client machines
n
I just incorporated environments into my puppet...
On the server...
[main]
...
[pax]
manifest = /etc/puppet/env/pax_prod/manifests/site.pp
modulepath = /etc/puppet/env/pax_prod/modules
[fre]
manifest = /etc/puppet/env/fre_prod/manifests/site.pp
modulepath = /etc/puppet/en
On Tue, Feb 22, 2011 at 10:42:34AM -0500, Ashley Penney wrote:
> Hi,
>
> I'm having a problem with a module that works on my production servers, but
> is giving me grief when ran from scratch. When I run the client I get:
>
> [root@hlsdevcms1 puppet]# puppetd -tv
> info: Retrieving plugin
> info
You can use a file resource to copy a diff to a temp/diff area that
notifies an exec that does the diff as you have mentioned. This means
the diff would only get downloaded once, and the patch only applied if
the diff changes.
So roughly:
file {"/var/lib/diffpatches/foo.patch":
source => "puppe
Are client and master at same version? What version are you using?
On 23/02/2011, at 8:40, Roberto Bouza wrote:
> I've removed /var/lib/puppet and /etc/puppet/ssl multiple times
> (removing the cert from the puppetmaster as well) with no luck.
>
> The times are in sync...
>
> Is really strange
I think only on master. This might help you further.
http://docs.puppetlabs.com/guides/security.html
On 23/02/2011, at 8:29, Jed wrote:
> I'm trying to wrap my head around these files...
>
> do both of them need to reside on the client and master?
>
> are there any docs that describe these fi
I've removed /var/lib/puppet and /etc/puppet/ssl multiple times
(removing the cert from the puppetmaster as well) with no luck.
The times are in sync...
Is really strange.
On Feb 22, 12:27 pm, Denmat wrote:
> Hi,
> Not sure on this but it looks like puppet is having issues reading>
> /var/lib/
I'm trying to wrap my head around these files...
do both of them need to reside on the client and master?
are there any docs that describe these files and what all the option/
sections are and what they do?
Thanks all
--
You received this message because you are subscribed to the Google Gr
I am running 2.6 and can do this if needed. What would the parent class be
in this example, the 'rhythmyx' class that the user{} entry is in? This is
just included from foreman so I'm not sure there really is a "parent" as
such. I have a user class for actual people that I could use if I had to.
Hi
The way I've got around this is to realize the user in the parent class or to
create a 'user' class and put in a
{ class name: stage => pre}
to guarantee it is created first.
That's using stages in 2.6 though. Not sure what you're running.
Den
On 23/02/2011, at 2:42, Ashley Penney wrote:
Hi,
Not sure on this but it looks like puppet is having issues reading
> /var/lib/puppet/lib
Other things with SSL issues is to make sure your clocks are up to date, that
you're using the right cert name if needed and DNS working correctly.
Hope it helps.
Den
On 23/02/2011, at 6:53, Roberto Bou
Hi
I use Cobbler for provisioning and it can handle dhcp and dns if you want. It
is a bit light on debian support but I run mainly RH severs.
The other that is mentioned already, foreman, maybe better as an integrated
solution.
On 23/02/2011, at 7:05, Russell Jackson wrote:
> On 02/22/2011
On 02/22/2011 10:14 AM, James A. Peltier wrote:
>
>
> - Original Message - | I thought about DHCP for static
> addresses. I'd need the MAC for each | machine
>
> This is not necessarily true. If you configure the client to send a
> requested hostname it will not require you to register
Hi All,
For most of the config files we manage via our Puppet setup, we either
serve flat files or use templates and dashboard parameters and Facts
to dynamically create the config file. However, in some cases we are
not comfortable with either of these methods due to the possibility of
small but
This is the first time is happening... and It happens consecutively
with all the hosts.
Fresh kickstarted host (never set up before the name so its not on the
revocation list), I just run puppetd -tv (we have autosign on), I just
get the output below:
[root@server182 puppet]# puppetd -tv
info: Cr
James A. Peltier wrote:
This is not necessarily true. If you configure the client to send
a requested hostname it will not require you to register the MAC
address, although, as per the usual this is a security risk since
anyone on the network could pose as a machine if they knew that
was the se
- Original Message -
| I thought about DHCP for static addresses. I'd need the MAC for each
| machine
This is not necessarily true. If you configure the client to send a requested
hostname it will not require you to register the MAC address, although, as per
the usual this is a secur
On Feb 22, 2011, at 9:09 AM, Paul Willis wrote:
> On 21 Feb 2011, at 15:49, Felix Frank wrote:
>
>> On 02/21/2011 05:39 AM, 暁華 管 wrote:
>>> Hi,
>>>
>>> I installed puppet 0.25.4 on ubuntu 10.04. It was ok until puppet
>>> client and server were intalled. But when I tried to execute the
>>> foll
Oh, great timing!
I'm working on pretty much the same question. I have used FAI and
Opsware, and homebrewed scripts to do provisioning in the past. I have
never been all that happy with any of them, and am taking another look
at the problem to try to get to as simple and portable a solution a
On 21 Feb 2011, at 15:49, Felix Frank wrote:
> On 02/21/2011 05:39 AM, 暁華 管 wrote:
>> Hi,
>>
>> I installed puppet 0.25.4 on ubuntu 10.04. It was ok until puppet
>> client and server were intalled. But when I tried to execute the
>> following command, the error, "Could not request certificate:
>>
Hi
I am very new to puppet, I have been reading online docs at
http://docs.puppetlabs.com/, but I couldn't find the answer to my
following question.
Please let me know the URL if I missed it.
>From R1 link, looks like we can put LDAP authentication when
accessing the dashboard URL.
The question
I thought about DHCP for static addresses. I'd need the MAC for each machine
though. For now, I'm worrying about plugging some media or doing network
boot on machines by hand. I suppose I'll need to do something on the host to
indicate what the machine role will be. In any case, I could simply use
Never forget the DHCP does NOT necessarily mean "dynamic addresses". Depending
upon your corporate culture, it may be perfectly acceptable for DHCP to hand
out statically assigned addresses to your hosts. This would allow your build
process to be easy, and you can have the host never DHCP agai
Foreman could come in handy.
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscr...@googlegroups.com.
For more o
We have a small pool of DHCP IP addresses for use only in the build
process. This is our process:
1. We boot the servers from PXE network boot
2. They get one of the temporary IPs
3. They start a CentOS network install using a kickstart file with the
bare minimum of packages selected, includi
addtional info...
ruby 1.8.7 p299 built from source
rubygem 1.5.7
latest facter version
centos 5.5 (latest yum update)
On Feb 22, 8:19 am, Jed wrote:
> anyone know what the heck this can be ...is it indeed a bug ? ---
> i;ve seen some history that is was a bug on the 0.24/5 platforms ...
> but
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Why not use DHCP? This is what it's for.
The general standard that I've seen is DHCP + KS + modification
scripts/puppet/whatever
Trevor
On 02/22/2011 10:47 AM, David Kavanagh wrote:
> I'm about to start playing with Kickstart. I never really had to
I'm about to start playing with Kickstart. I never really had to provision
bare servers beyond a normal OS install, so I need something to use along
with Puppet. Is there a general consensus on what the best option is?
I'd need to set up the node with IP/hostname/role. (I have a custom fact for
rol
Hi,
I'm having a problem with a module that works on my production servers, but
is giving me grief when ran from scratch. When I run the client I get:
[root@hlsdevcms1 puppet]# puppetd -tv
info: Retrieving plugin
info: Loading facts in apache-ports
info: Loading facts in location
info: Loading f
On Feb 22, 2011, at 10:09 AM, Nigel Kersten wrote:
> On Tue, Feb 22, 2011 at 12:08 AM, Rawler wrote:
>> What about keys?
>
> Run an exec that adds the key. How would you normally solve this ?
Indeed, this is what I have done previously. The other option is to use a File
resource for the keys a
On Tue, Feb 22, 2011 at 12:08 AM, Rawler wrote:
> What about keys?
Run an exec that adds the key. How would you normally solve this ?
>
> On Jan 14, 12:11 am, Nigel Kersten wrote:
>> On Thu, Jan 13, 2011 at 2:07 PM, Kevin Beckford wrote:
>> > Now, I noticed the yumrepo, but this is of little u
What about keys?
On Jan 14, 12:11 am, Nigel Kersten wrote:
> On Thu, Jan 13, 2011 at 2:07 PM, Kevin Beckford wrote:
> > Now, I noticed the yumrepo, but this is of little use today, I need to add
> > an ubuntu ppa ( a few really ) to my installation. How would this be done?
> > Is there a provi
anyone know what the heck this can be ...is it indeed a bug ? ---
i;ve seen some history that is was a bug on the 0.24/5 platforms ...
but my server and my client are from 2.6.4 (they were built from the
same source at the same time, using RPM SPECs)
Feb 22 07:20:44 puppetclient01 puppet-agent[1
On Mon, 21 Feb 2011, Felix Frank wrote:
>
>
> On 02/19/2011 10:23 AM, Patrick wrote:
> > If so, you probably need to change the syntax in your define. I'm hoping
> > there's a syntax that tells puppet to join 2 arrays.
>
> If the provider in question fails to flatten the array properly, you're
>
On 02/21/2011 06:21 PM, vincent wrote:
> I have removed the ca_crl.pem puppet master has create a new one
> but some hosts are not working now:
>
> host1 OK :
> # puppetd -tv
> info: Caching catalog for host1.bc
> info: Applying configuration version '1298308566'
> notice: Finished catalog run i
On Feb 22, 2011, at 12:06 AM, donavan wrote:
> On Feb 15, 5:21 pm, Patrick wrote:
>> Does anyone have a guess if this bug is in the client, the master, or
>> dashboard? My report value is "reports = http, store".If the error was
>> originally from dashboard, would the master have failed t
On Feb 15, 5:21 pm, Patrick wrote:
> Does anyone have a guess if this bug is in the client, the master, or
> dashboard? My report value is "reports = http, store". If the error was
> originally from dashboard, would the master have failed to save the file
> because the order matters?
I've
51 matches
Mail list logo
