We've tried booting the box with "linux noapic" and had no luck.
We've also looked for any bios settings for "PCI Bus 2.1 Compliance" or "PIC
mode" or something similar and the tech was unable to find anything about
either, in the PC bios, Mylex bios, or Adaptec bios.
We haven't tried messing wit
Not only do I Google, but I apparently typo too. D'oh. Yes, I meant apic.
Nicholas
-Original Message-
From: Douglas K. Fischer
To: [EMAIL PROTECTED]
Sent: 10/23/02 2:35 PM
Subject: Re: Mylex DAC960 problem
At 10:33 AM 10/23/2002, Nicholas Tang wrote:
>I read somewhere else on
At 10:33 AM 10/23/2002, Nicholas Tang wrote:
I read somewhere else on another list (I'm a google fiend) about it needing
to boot with "linux adic" and tried that with no luck either. I've opened a
support ticket about it, but I figured I'd try the list here too, just in
case someone had some expe
On Wed, 23 Oct 2002, Nicholas Tang wrote:
> Pending List:
> Kernel Free SCB Kust: 2 1 0
> scsi:0:15:0: Command already completed
> aic7xx_abort returns 0x2002
> scsi device sert offline - not ready or command retry failed after bus
> reset host 1 channel 0 id 15 lun 0
> loading DAC960
Hello Nicholas,
I had the same problem, but I seem to have solved it switching the bios
option "PCI Bus 2.1 Compliance" to off.
If this is not sufficient try switching the PIC mode from "APIC" to
"PIC" (always in bios).
Also, be sure to have installed the latest kernel (2.4.18-17.x).
Good luck,
A
Additional info:
The VA model is the Full-On 2240, and it has 3 drives in a RAID 5
configuration.
Adaptec AIC-7896 Scsi BIOS2.20S1B1
DAC960 BIOS4.10-38
DAC960PRL Firmaware 4.07-0-07
The error looks like this:
Waiting Queue entries
Disconnected queue entries
QUOTFIFO entries
Sequencer
