On Tue, Jan 21, 2003 at 11:48:31AM -0700, Guy Fraser wrote:
> Hi
>
> There was some discussion about this a while back.
>
> There were some tests done and IIRC the promise controler had better
> performance when used as a standard IDE controller using the linux software
> raid. Again IIRC the rai
Hi
There was some discussion about this a while back.
There were some tests done and IIRC the promise controler had better
performance when used as a standard IDE controller using the linux software
raid. Again IIRC the raid "firmware" on the card actually just enables a BIOS
extension and the ra
On Monday 20 January 2003 20:53, Charles A. Crayne uttered:
> It is NOT software RAID from the point of view of the linux kernel, and
> there is a separate hardware controller for the IDE RAID arrays [which can
> be disabled by a physical jumper] than there is for non-RAID IDE drives,
> but Peter f
On Thu, 16 Jan 2003 17:03:54 -0500
Michael George <[EMAIL PROTECTED]> wrote:
:Are you sure that the FastTrack 100 TX2 is actually software RAID? If that's
:the case, why wouldn't one just put one drive on each of their MB ATA
:controllers and run software RAID on the system?
It is NOT software R
On Sun, Jan 12, 2003 at 01:58:23PM +0100, Arjan van de Ven wrote:
> On Sun, 2003-01-12 at 06:52, Charles A. Crayne wrote:
> > On Sun, 12 Jan 2003 00:02:29 -0500
> > "Peter Larsen" <[EMAIL PROTECTED]> wrote:
> >
> > :I'm never going to get used to the oxymoron IDE RAID :)
> >
> > If you think that
On Sun, 12 Jan 2003 01:24:21 -0500
"Bruce Embrey" <[EMAIL PROTECTED]> wrote:
:From what I remember, Promise provides the install disk for RH 7.2/7.3 :which :allows
:you to install the drivers during the installation. In :November they :released
:"Partial Open Source" drivers but it appears :you
On Sun, Jan 12, 2003 at 01:34:59AM -0500, Peter Larsen wrote:
> Why should the OS be concerned about RAID at all? It works best as a hardware
>solution. Software is nice for low-end systems without too much disk-io. At least I
>can make threads access multiple disks concurrently on software-raid
On Sun, 2003-01-12 at 06:52, Charles A. Crayne wrote:
> On Sun, 12 Jan 2003 00:02:29 -0500
> "Peter Larsen" <[EMAIL PROTECTED]> wrote:
>
> :I'm never going to get used to the oxymoron IDE RAID :)
>
> If you think that "IDE RAID" is an oxymoron, what terms
> of abuse do you reserve for "SOFTWARE
Charles A. Crayne wrote:
> On Sun, 12 Jan 2003 00:02:29 -0500
> "Peter Larsen" <[EMAIL PROTECTED]> wrote:
>
>> I'm never going to get used to the oxymoron IDE RAID :)
>
> If you think that "IDE RAID" is an oxymoron, what terms of abuse do
> you reserve for "SOFTWARE RAID", which seems to be the o
rak.o drivers.
Btuce Embrey
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Peter Larsen
Sent: Saturday, January 11, 2003 9:31 PM
To: [EMAIL PROTECTED]
Subject: Re: how do I install to Hw RAID (Promise 20265 Fasttrak 100)
Samuel Flory wrote:
>>
On Sun, 12 Jan 2003 00:02:29 -0500
"Peter Larsen" <[EMAIL PROTECTED]> wrote:
:I'm never going to get used to the oxymoron IDE RAID :)
If you think that "IDE RAID" is an oxymoron, what terms of abuse do you reserve for
"SOFTWARE RAID", which seems to be the only form of RAID which Linux actually
On Sat, 11 Jan 2003 21:30:49 -0500
"Peter Larsen" <[EMAIL PROTECTED]> wrote:
:Samuel Flory wrote:
:>> I now have an Acorp 6A815EPD MainBoard with a Promise 20265 Fasttrak
:>> 100 embedded RAID. I have tried to get Redhat 8.0 and 8.1 beta to
:>> install onto a RAID 0 partition (striped for speed) t
Samuel Flory wrote:
>> I now have an Acorp 6A815EPD MainBoard with a Promise 20265 Fasttrak
>> 100 embedded RAID. I have tried to get Redhat 8.0 and 8.1 beta to
>> install onto a RAID 0 partition (striped for speed) the installer
>> does not see the RAIDcard at all. I can use the (Alt-Ctrl + F2)
[
Norman Madden wrote:
I now have an Acorp 6A815EPD MainBoard with a Promise 20265 Fasttrak 100
embedded RAID. I have tried to get Redhat 8.0 and 8.1 beta to install onto a
RAID 0 partition (striped for speed) the installer does not see the RAIDcard
at all. I can use the (Alt-Ctrl + F2) console d
14 matches
Mail list logo